When I go to hotspot --> hosts, open a host, and click "Make Binding" winbox crashes. This has been confirmed on 5 different computers running WinXP 32bit, Vista 32bit, 7 32bit, and 7 64bit.

The Mikrotik is installed in a hotel. The reason we use VLANs is that putting each room on it's own VLAN allows us to keep track of what user is in what room. This helps us both with security and with guest troubleshooting. Additionally, the Franchise Specs for many US hotel chains require that VLAN...

I can guaranty that my company will have zero interest in purchasing these if they do not come with a command line interface. If 24/48 port and 24/48 port PoE versions were offered, with a command line, we would jump all over these.

What kind of luck have you had with the DLI reboots? We've got 30 of them deployed, all running the latest firmware. About 1/4 of them work, and are being replaced with products from Synaccess as budget allows. *edit* to add, all of our installations with failed DLI's are in climate controlled and ...

I just tested it on my Win7 64bit, works fine.

We got it working..... The problem is that the host computer I was using had a statically defined DNS server, while using DHCP for the IP and gateway, the DNS proxy does not work. Setting DNS to DHCP, instead of static, and I can Creating a NAT rule to simply pass through DNS traffic, instead of usi...

ether1 is wan1 ether2 is wan2 wlan1 is lan/hotspot /ip hotspot profile set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap name=default rate-limit="" smtp-server=0.0.0.0 split-user-domain=no...

No luck there either. If I clear out the DNS cache on the Mikrotik, and try to get to a website while running the torch, I see the DNS request come in, and I see the DNS cache add the proper entry. However, while monitoring the torch, the Mikrotik never sends out a response with the DNS reply. If I ...

fewi, no change. hosts are still unable to resolve DNS. can ping out just fine...

I am still running into DNS issues.....

Output of ip dns:

primary-dns: 67.91.XXX.XXX
secondary-dns: 67.91.XXX.XXX
allow-remote-requests: no
max-udp-packet-size: 512
cache-size: 2048KiB
cache-max-ttl: 1w
cache-used: 4KiB

I upgraded the box to 4.2 (was running 3.27 :? ), and now DNS is working fine with the hotspot The next issue I am having is regarding the load balancing itself. I have WAN1, WAN2, and LAN1. Using the ping utility, if I specify to ping out to the internet from WAN1, it can get out just fine. However...

This is pretty typical of all our Smaller AP's. We have 5.8 back hauls to a Local 900Mhz XR9 system http://www.blenderprojects.org/images/IMG_0719.JPG What we have up top http://www.blenderprojects.org/images/IMG_0765.JPG Here is a custom job I did for the top of a building in the center of town ht...

The issue I am having currently is that with the hotspot enabled, users are not able to resolve DNS. Users can ping DNS servers, but aren't able to resolve anything.

Disable the hotspot, and DNS works fine.

fewi,

Would you mind posting a sample hotspot config to go along with your PCC config?

I'd greatly appreciate it.

On my hotspot, users are limited to 256k up and down. However, there are some users that I want to bypass through the hotspot, but I still need to limit their speed. What is the easiest way to rate limit bypassed users?

The default profile that the PPTP server is set to use has "Remote IP" set to the DHCP pool of "vpnpool"

You need to set the Local IP in the PPP Profile as well. You can't specify Local IP via Radius, only Remote IP can be a pool or via Radius.

That did it. Thank you!

steel belted radius

*to add* the attribute is set to "Framed-Pool" in the radius server

Hoping to get some help. I've got a PPTP vpn setup on an RB450 (3.28). I have no problems with it using defined Secrets in the Mikrotik, but am having nothing but problems using Radius. Initially I have been getting the error "terminating... -could not determine a remote IP address" The de...

I'm trying to connect a Windows client to an L2TP server on an RB450. I followed this tutorial: http://wiki.mikrotik.com/wiki/MikroTik_RouterOS_and_Windows_XP_IPSec/L2TP In Windows, I'm getting the following error: "Error 678: The remote computer did not respond." I have the torch running,...

Tim, Mediacom is my ISP, so I'll see if they can do that for me

eneimi, the problem with that is this:

my ISP will only allow me to have one IP per mac address.

I've got a pool of public IP's from my cable ISP. However, I am not able to assign multiple IP's to a single MAC address because of ISP rules. I want to have a single public IP masqueraded for most internet traffic, but I want to be able to 1:1 nat one of my other public IP's this is how the network...

I've been getting complaints all day from users, who are unable to get DHCP leases from my Mikrotik. When I go to view the current leases, this is what I see: http://castor-troy.com/busy.png If I try to delete one of these leases, it immediately comes back. Rebooting the Mikrotik had no affect. What...

I'm having some issues trying to bypass some specific subnets on my Hotspot. My private network has 4 different subnets. 1 of those subnets is the hotspot, and the other three are for different piece of equipment. I've got the three subnets that are bypassed added to the IP Bindings list as bypassed...

I am trying to configure a hotspot, using radius to authenticate, with multiple DHCP pools (a public and a private IP pool). To do this, I am using the "framed-pool" radius attribute to define what pool the user is assigned to. However, when the routeros receives the radius accept with the...

I did some searching, but was not able to come up with much. How many hotspot users will an RB1000 support? System will be connected to two DS3's, with a separate Radius server for user authentication. I know that a software limit won't be an issue, I just need to know how much the hardware can supp...

I am planning on using my RB433 as a redundancy server and hotspot gateway. My one question is, do I need to do any special configuration to make sure that if one of the 2 internet connections goes down, the RB433 will know to not send traffic out a specific interface? i.e. setup an autoping of some...

I'm attempting to setup a wireless hotspot. I've followed the hotspot tutorial, but I can't seem to get it to work. ETHER1 is connected to WAN, ETHER2 is to 3com wireless access point. ETHER2 has two IP's assigned to it; a 172.16 IP for the users, and 10. for the 3com management. Wireless users are ...