Tell me please, PPTP or PPPOE users (win 7) can watch IPTV through IGMP-proxy or PIM? Or is it fundamentally impossible? I will answer myself to my question: In order for PPTP or PPPOE win 7 users can watch IPTV, you need to install updates from the Microsoft website. This applies to Win 7 and Win ...

Tell me please, PPTP or PPPOE users (win 7) can watch IPTV through IGMP-proxy or PIM? Or is it fundamentally impossible?

Two questions about Multicast: Question 1. Router with two network adapters for IPTV. /ip address add address=129.109.1.22/24 broadcast=129.109.1.255 comment= IPTV \ disabled=no interface=ether1 network=129.109.1.0 add address=192.168.0.1/24 broadcast=192.168.0.255 comment= Lokal \ disabled=no inter...

I have a similar problem: MT 4.11 /system package> print Flags: X - disabled # NAME VERSION SCHEDULED 0 system 4.11 1 X ipv6 4.11 2 X ups 4.11 3 synchronous 4.11 4 routerboard 4.11 5 X wireless 4.11 6 X hotspot 4.11 7 routeros-x86 4.11 8 dhcp 4.11 9 mpls 4.11 10 routing 4.11 11 ppp 4.11 12 security ...

I have a similar problem. Absolutely correct konfig and result as for you, one time a precipice goes per 10-15 minutes.

For me a hope is on more stable version of Mikrotika or more correct rules of Load Balancing.

NetworkPro Your recommendations did not help unfortunately. Made those alterations that you recommended. Turned off the rules of ICMP. Ruter overloaded even. Result of totzhe, from 10 beginnings to swing On-line of films in a flow 10 mines were torn off all. I will be upgrade on 3.22 or wait more s...

Dear NetworkPro greater thank you that you answered quickly. I believe in to that you brought in correct corrections however able I will be to apply them only tomorrow early in the morning when little users will be. As an experiment with the use of new rules of Load Balancing made off a failure, I d...

Load Balancing. Where my error? Upgraded to the version 3.20. Router executes one task only - Load Balancing ½ and to redirect ICMP on a certain interface (gateway). Before balancing was on principle: /ip firewall mangle add action=mark-connection chain=prerouting comment= Inet_1 connection-state=ne...

/interface bridge add name=bridge1 /interface bridge port add interface=ether1 bridge=bridge1 add interface=ether2 bridge=bridge1 Thank you greater that answered. If to create bridge I will have 2 IP address and only 1 MAC (mac address of bridge). I will connect a network cable only in one network ...

help me please

Really for whoever does router look 2 ethernet cards in one network (svich)?

There is such at the first and second method: Before connecting of ether2: /ip arp> print # ADDRESS MAC-ADDRESS INTERFACE 0 D 10.10.10.1 xx:xx:xx:xx:27:5E ether1 1 D 172.168.0.2 xx:xx:xx:xx:3B:9F ether3 After 20 seconds after connecting of ether2: /ip arp> print # ADDRESS MAC-ADDRESS INTERFACE 0 D 1...

I want 2 ethernet interface of one router to connect in one switch in a local network. What method is correct? 1. ip address/ add address=10.10.10.1/18 interface=ether1 add address=192.168.1.1/24 interface=ether2 Is it possible to connect so...? 2. ip address/ add address=10.10.10.1/18 interface=eth...

Help please. How to adjust MIkrotik that this server failed to appear in WinBox in the inset of Connect To.
What port or protocol to close? Or for this purpose is there the special command?

http://www.mikrotik.com/testdocs/ros/2. ... login1.jpg

policy based routing is not possible with P2P... For me now works so. I do not want ports of ONLINE of games by hand to inscribe. I want, that all on straight (primary gateway), and only Р2Р on additional (second gateway). For me a channel with Р2Р will be loaded on 100% and ping on him will be gre...

Really in any way is it impossible Р2Р to throw on other interet connection?

copy this script under new terminal
...

For someone did turn out to send р2р in such method on other interface?
For me it is not. For example 80 port is thrown. р2р only partly and to outgoing traffic

Dear support. Prompt please as on RouterOS it is possible to change port of connecting VPN (VPN in the mode client)? I.e. that RouterOS on VPN connected to the provider of internet which works not on 1723 and on a 1015 port (server of provider on Win 2003). I am sorry for repetition if such question...