Hi
user-manager package is not available for RB750Gr3, also as for RB3011.

If it follow the same path of user-manager for RB3011, it will be available on RouterOS 7.

Andrea

Hi, on CAP you can set multiple CAPSMan Manager using the option caps-man-names and caps-man-certificate-common-names , but synchronization between CAPSMan Manager has to be done using two scripts: - One that export sections you want to synchronize (like configurations, provisionings, security-profi...

HI pe1chl,
thanks for your suggestions

I'm not really expert about CISCO and your guidelines help me a lot! I will follow them and keep you updated!

Hi pe1chl and mducharme, thanks for your support. The port on CISCO is set as "switchport access vlan 101" then I don't need to declare VLAN on the bridge Mikrotik's side. About mducharme suggestion, I know that isn't possible to use port as bridge member and as switch toghether; when I pu...

Hi freakneck, sorry but I think there is a misunderstanding. VLAN interface on Mikotik is a virtual LAN interface, and as a physical interface, it can have an IP address and services, like DHCP client or server. Also switch can have a management VLAN different that the ID=1 standard, the you can ass...

Hi, I'm asking about your help for a little problem that I've found today.. little but I cannot understand why :( I've a bridge with 2 ether ports inside (one to the switch port set in ACCESS mode on VLAN 101, one to grant access to the VLAN 101 to one PC directly connect to this RB1100 port) /inter...

Hi fabiosanchez27, actually configuration provisioning as to be deployed using script (as you noticed, CAPSMAN do it for wireless interface but it cannot support controller-less mode; if you play and spend sometimes with scripting, you can find a solution for them). If you set a device on dude as Ro...

Hi Lakis, I think that isn't any control when you input a new entry on access list, but ACL works like firewall rules, then, if you insert multiple rule for the same MAC with the same specifications, the first will match and work, others are not take in charge. In fact , I think there is no problem ...

Hi vampy, the right NAT rules is /ip firewall nat add action=masquerade chain=srcnat out-interface=l2tp-out1 (you can also add a src-address-list in order to make this NAT rule valid only for 192.168.88.0/24 network. The main issue is that you haven't set any default route for traffic, then you cann...

Hi,
to reach DNS server, your Routerboard needs to have a default route installed.

You can check it by:
and check if you have a route with dst-address=0.0.0.0/0 and gateway your Internet Router.

Hi,
I think you need to use some debug topics, like
In this way, you might be able to see all reject device from your wireless.

Hi, sorry but your question is very ... confused. I see you know how to forward port/service from outside to inside your net using dst-nat, but I don't know what you mean with "But i dont know how to open up all ips from the inside open to the outside". If you haven't set any specific fire...

Hi, I think that the better way to do it is setting your ether5 port as hybrid port. Assign an IP to ether5: /ip address add address=192.168.88.254/24 interface=ether5 and after create a VLAN (eg: VLAN101) /interface vlan add name=ETH5-101 vlan-id =101 interface=ether5 /ip address add address=192.16...

Hi, I'm testing an hotspot configuration with 2 different hotspot service on 2 different ports (eth4/eth5) and 2 WAN connection in failover (eth1/eth2). Basically what I need is that all traffic from both hotspot will be balanced through the 2 WAN (for failover and failback I've introduce a route co...

hi ZeroByte,
thank you for your answer.

I've just applied your suggestions about DNS entry and everything works well

Dear all, thank you in advance for any support :) I'm making a DNS redirect solution for Mikrotik hotspot, where I need redirect all DNS request from Hotspot in order to redirect them to my DNS server without change any parameters on routerboard. Actually, I do some research and I'm doing it with th...

The easiest way to achieve what you want is to use two hotspot profiles, with two DHCP pools Hi all, finally I choose to follow this way, using 2 different hotspot profile with 2 different DHCP pool and set my RADIUS to reply with the correct framed-pool. In this way, I've isolated the 2 hotspot us...

Thank you ZeroByte and flameproof for your suggestions, I will try both way and I'll keep you update about it.

What are you trying to accomplish? State your broad design goal and perhaps there's a solution that will work with less effort. Thank you for your reply ZeroByte. Basically, I need to run 2 different hotspot server on the same RB that has a common RADIUS Authenticator but an isolation between them ...

Dear all, thanks in advance for any support :) Following my scheme: RB with 2 different hotspot on the same machine ether1 connected to the Radius with 2 LAN IP of the same subnet (192.168.1.1/24 and 192.168.1.2/24) Radius client on RB set to speak with RADIUS Server Actually, each RADIUS accounting...

Hi guys,
I see on change log this interesting feature:

*) hotspot - added option to login user manually from cli

But I cannot find any new function about it on /ip hotspot

Does anyone already test it?

Hi Guys,
I only need to know if SNMPv2 is supported in Router OS3.x

Hello!