Hi all. I use panel antenna but in this season an ice layer cut me some point to point. Singnal level and signal to noise remain constant but the ccq go to 0. Have someone experienced anti ice solutions for panel antennas ? Spray, paint, thermal solutions ? Could someone give me some hints ? Thanks ...

Thanks a lot surferTim.
It works as you describe.
Anyone think coud be another way to force the opening of a page also if the user do not change page ?

Happy new Year!

thank you SurferTim.
this happen also if the user close the status page ?
I can say to the hotspot to reopen this page each 10 minutes ?

thanks
marie

Hi all.
In a hotspot, is it possible to show to the user a certain pag each 10 minutes it navigates ?
I want to display the status page of the connection.
Have someone an hint ?

thanks to all.

Someone knows queue tree speed ?
For example, with 34Mbit of internet connection, 500 users, 20 queue tree, if a low priority queue gets all 34Mbit then an high priority connection begin: how many time the new queue take the bandwith ? Milliseconds or seconds ?

thanks

Hi all. In my registratin table stats I can see: - tx-signal-strength=-61dBm - tx-ccq=100% - rx-ccq=100% BUT frames=154637,420371 AND hw-frames=288097,860404267 It seems that hw-frames-r/frames-rx > 6000! If it retries so much, how the ccq could be 100% ? Thanks [admin@mycpe] > /interface wireless r...

I think RB411 is perfect to build my CPE, together with poynting antenna WLAN-A0017.
Now I have a doubt about the hiperlan radio: have you any suggestion ?
thanks of all

marie

Hi all. I have read the Janism pdf (http://mum.mikrotik.com/presentations/US08/janism.pdf) about best practice in QoS in large scale networks. This very interesting document keep in my mind some questions: 1. is it possible to encapsulate a traffic prioritization inside a pcq ? i.e. for each user of...

The Mtu of my pppoe server is 1480.
I have this problem only with sites I cannot ping!
Could it be an ICMP problem ?
How can I check this?

thanks

Hi all. I have a pppoe connection inside an EoIp tunnel. I cannot open some sites (like support.microsoft.com) if the pppoe server have change-tcp-mss=no. If I set this value to ON I can browse this sites BUT i cannot ping them. Someone could answer: "set change-tcp-mss=Yes". My question i...

macgaiver,
what is your full MTU configuration ?
I have the real interfaces (eth and wlan) with MTU= 1500, the eoip tunnel with MTU=1500.
Have you the same configuration ?
Which values do you use for MAX MATU and MAX MRU for pppoe server ?

thanks

Hmmm... I have pppoe connections inside a EoIP tunnel. EoIP have MTU=1500. Eoip attach its header to the pppoe frames (24bytes?); pppoe attach 20bytes to IP frame. If this is correct, I must: 1. in pppoe servers set MAXMTU and MAXMRU to 1500-24-20 = 1456 2. change the MTU of the public interface to ...

thanks parrini.
I will take a look

I suspect somewhere ICMP packet receive a deny.
How can I test the ruter of the network if they correctly notify the sender that a too large packet must be fragmented ?
Wath type of ICMP packet I must allow ?
Now are allower: 0, 3, 4, 8, 11, 12.

Thanks

Thanks parrini.
1480 for both MTU and MRU ?

M.

I must learn how to manage a network of CPE, Point-MultiPoint, Point-Point, Subscriver server, all with Mikrotik and RouterOS. Point-Multipoint create an EoIP tunnel with subscriver. All the interfaces of all the network have a MTU=1500. All the CPE's create a pppoe tunnel with subscriver. In this c...

you are fantastic!
thank you MRZ.
Marie

Hi all!
I have users that connect to a subscriver using pppoe.
Each user have an assigne profile (basic, medium, extra).
Now I want to implement queue tree to give different priority to users with different profile.
How can I filter in mangle users having certain prifle ?

thanks!