MikroTik

nowoxi

wow... look at that this IP: [Device.AddressesCommaList] was there and i was using snmp. the only thing am stuck with now(always stuck i dont know why) is that it seems to all present the first IP of the box do you know why? With this i would have 1 function for each device which will put all the IP...

nowoxi

hey look what i did i was able to reduce the netmask with this 3 functions nmaskD string_substring(oid("1.3.6.1.2.1.4.20.1.3.192.168.50.62"),12,3) nmask4 if ( nmaskD() = 255,8, if ( nmaskD() = 254,7, if ( nmaskD() = 252,6, if ( nmaskD() = 248,5, if ( nmaskD() = 240,4, if ( nmaskD() = 224,3...

nowoxi

if you look into the functions you will see ... if and else if like the cpu usage function and some other ones. I attached shots of an snmpwalk with the oid you used . its so different lol. I haven't found any oid that can do that in Mikrotik for now. I wish it was simpler (dont we all) snmpwalk.jpg...

nowoxi

I love your idea its simple i would go for that first lol but what i was planning to do is split up the 4 parts of the subnetmask change it into the number of bits then add it together to get the number like 255.255.255.224 would become A=255 B =255 C= 255 D= 224 then an if statement would convert A...

nowoxi

Hi, thanks once again, ok so i tried your OIDs and they didn't work on my system but this is an OID with ip address of n my system 1.3.6.1.2.1.4.20.1.1.192.168.50.62 this one is for the mac address 1.3.6.1.2.1.4.20.1.3.192.168.50.62 i guess i have to ignore the last 4 sections that look like the ip ...

nowoxi

Hi,thanks alot for your response. What i just noticed about using an oid like this 1.3.6.1.2.1.4.20.1.1.192.168.50.62 is that the ip address is already there so its almost like i am manually adding the ip address myself if the ip changes or i apply this to another device it wont work (the ip is 192....

nowoxi

Hi, i would appreciate if someone could tell me what code i could use to show the network address of my MT interfaces as part of the Label of a device getting the value from snmp.

Thank you

nowoxi

I think it should be okay

nowoxi

@nexus010 Hi, really am not sure am clear are you saying the board went off at the expiry time? Did the settings get reset or did it just go off? When you turned it back on was everything back to normal? Also, wow I know what you mean about your mast and clients you could loose all your hair for som...

nowoxi

@nexus010
Get a new license it will work. I think the license problem is either random or at least the reason isn't at our disposal yet.

nowoxi

i fixed it. added missing functions to dude

nowoxi

Hi, has anyone tried version 4.4 with nstreme (exact size and framer limit 3200) It seems to be broken. The wireless link becomes unstable and keeps disconnecting until the test is over. Also data transfer rates are a crawling 5Kb/s. Any work around if noticed? Also, some important functions are mis...

nowoxi

Hi, does anyone have an idea on what i can do about cpu_mem_disk function which seems to fail on version 4.3 and 4.4

nowoxi

Hi, I had my dude working on an rb333 before with a very buoyant setup... I can get winbox and a lot of data from SNMP and a simple right-click. Now i upgrade to version 4.3 and some how i loose the setup. When i attempted to reconstruct the map SNMP enabled devices instead of showing their values l...

nowoxi

Hi Fellows,

Willl dude-3.4.npk works under ROS 4.3 ?

TIA

Paul

Hi it does though it reset my dude setup and i had to draw the network again for some reason (I know about backups and the likes).

nowoxi

RouterBOARDs can have problems with SoftID generation in the long format after upgrade. This issue will be fixed in v4.4, please wait for this new version. Please, i am in that dilemma now and the routerboard cut with this is my backhaul connecting 4 other 5 km and 10km base stations, i was upgradi...

nowoxi

I have had the system running on the wiki setting for 2 months and I am a happy man. I have had my setup for over 2 years and it used to go out every 12AM but now its perfect. I am running a deep cycle 12v battery two 85 watts panels in parallel and a 10 amp controller.

nowoxi

I tried it today all still seems well would lpost the outcome here after this i would try with the monitor device in one of the links

nowoxi

I really think this thread and the wiki is underestimated it is so great. Thanks a billion men so well documented. I would try and add anything I can over time.

nowoxi

Am very greatful for the responses. So on the long run i was right to have seperated the network. i would keep it up, lol. Thanks once again.

So which of the routing protocols do you propose. Static, RIP ,v2,ospf etc n what configuration.i use both static and RIP

nowoxi

I saw some document online saying that bridging with no firewall is faster than routing with no connection tracking. Based on that would i be right if i have an interconnection of 10 AP's covering about 10km bridged togethered instead of having routing setup on them. Actually novice me used to think...

nowoxi

Hi all, i fixed the problem. The whole problem initial was cable length which lead to insufficient power. Later on i changed from a 333 to a 433 with a cat6 and a 400mw card the link was stable even in the 2.4ghz band but it wasn't good enough. I had disconnect timeout and some other settings change...

nowoxi

hi, i got the link stablized today(i bleieve). I changed the board and put a 433ah with a 400mw and 6mw card. The 400mw is making the 10km lap in AP mode on 2.4ghz band. The link wasnt very stable then too so lastly i have to increase the Hardware retries to 10, disconnect timeout to 10 and on fair ...

nowoxi

I also have a link with -69 to -79 db signal and very good ccq and throughput when it is connected but the link doesn't ever stay on for long. am thinking i should remove nstreme probably it would help stabilize the link else i would say the board is bad

nowoxi

Hi,
please i was wondering whats the signal strength range you are talking about?

nowoxi

When you say modulation level do you mean data transmit rates like 1mb -- 2mb.

I am using 2.4 ghz frequency band

nowoxi

Hi, my 10km wireless link with a signal level of -87db with rb333 and 600mw cards and 24db antennas and not very clear line of site disconnects on transfer of data. the connection always gets dropped. with out any transfer the link stays on and pings are in the unit but when a client in the remote s...

nowoxi

here is what i mean about the version number

[admin@Yakooyo] > system routerboard print
routerboard: yes
model: "333"
serial-number: "179801C18880"
current-firmware: ""
upgrade-firmware: "2.18"

nowoxi

so lets just say the card is bad. I would try to change the power adapter to rule out power, then i would try and change the card About distance i don't think there is a clear line of site. R52 with 65mw do not see good signals. I just tried changing the remote side to AP thinking it might help redu...

nowoxi

So what do you suggest?

nowoxi

Thanks for your response here is what i get a t the remote end with the card problem [admin@Yakooyo] > system health print fan-mode: auto use-fan: main active-fan: auxiliary (i don't have an auxiliary fan or any fan for that matter please why is this saying auxiliary) voltage: 12.1 and at the base w...

nowoxi

I have a 10km connection with 600mw engeinus cards and 24dbi grid antennas. The link is not very high and its on the 2.4ghz connection. Basically the main problem i am having now is when ever i try to send traffic across the link often i loose the connection. As if that's not very bad more than ofte...

nowoxi

@johnD please am having that problem now and i would apperciate a more explicit discription of what you are talking about.its a 2.4ghz link and its giving me the authentication timeout error i have -71db link and it used to work before until i had a rain and the antenaa got wet. i then remover the 1...

nowoxi

I have a 10km link which with a 24dbi antenna and amp on the client side and 15db omni and amp at the base. With out the amps the signal level is -94db with the amps i get as high as -69db but when collected the ping is eratic it varies from 3ms to 5000ms randomly and it is majorly always arond the ...

nowoxi

honestly you are not. i was hoping this topic would lead to something like this. So MT o really don't want to go and learn how to install configure and use cacti. Dude is the best :d. lets keep it that way.

nowoxi

thanks i would give that a try

nowoxi

is there a ay around it

nowoxi

Hi, please i would like to know if there is a way to get SNMP maps from dude with a more varying time like than the weekly monthly and yearly option put. I want to be able to view the graph of particular time ranges in the past as i wish.

Any information would surely help.

nowoxi

I have a WDS connection between my rb500 and dlink 3200 but there is no traffic passing throught the link. I can see the dlink in the registrasion table but under status it doesnt recieve anything from the dlink

nowoxi

You guys thanks a billion. I have fully come to terms with the fact that this is caused with interference because we have a lot of power outages around here and when that happens during the time the backup power lasts i don't get those kind of problems so i guess most other systems are also off at t...

nowoxi

Thanks alot. What about the non AP beacon error. Whats the explanation

nowoxi

Hi, i have been battling with this for a while. I have my AP in wds and when i connect with clients in wds mode. I get very frequent disconnections with this kind of error in the log. mac@wlan1: disconnected, beacon from non AP mac@wlan1: disconnected, excessive data loss (signal strength of about -...

nowoxi

Its a Dlink AP2100 and the link is stable on another Mikrotik Router. Only difference in 2 routers is channel and ssid and probably

equipment. Same make of parts and specifications

nowoxi

I have about 6 D-Link APs in wds mode with my Mikrotik and the link goes off more then often. Actually it goes off every 5mins or less. Does anyone have an idea. Also i was trying to create a WDS link between Mikrotik and another radio. I got a connection but there was no data transfer. When i check...

nowoxi

This isnt good at all. I have being have frequent disconnects no interms of the interface connected to the network but in terms of messengers diconnecting for a long time and even web page becoming unneccsarily slow and atimes show cannot find server while all you have to do is refresh them and they...

nowoxi

well personnally i usually upgrade with ftp clients like smartftp other methods always give me some sort of error or the other. you guys should try that out too

nowoxi

it`s not work!! saying these kinds of things will not give you answers. please clarify like described here: http://www.catb.org/~esr/faqs/smart-questions.html#before If you find the answer how to connect D-Link 2100AP to mikrotik by wds i will pay $50!!! The problem is in WDS protocol, not in bridg...

nowoxi

well i guess wds isnt really an issue or what you need since you can get ethernet round the house but if you cant wds will surely be a solution and with it you dont need to pass any wires

nowoxi

hmm well i think 5 or 6 hops is a bad idea for a network if you ask me i would say a maximum of 3. that should still be ok with no neccesity for a lan. you know i guess with that you can do some super planining and use the ethernet twice to make a network with 7 hops. then most times i think its bet...

nowoxi

i guessed as much thanks anyways. so what kinda board can i change to that would have enough resources. i want one that i can also put on a mast like the rb500

nowoxi

should we expect 1

nowoxi

well where can i get a download for the rb532 board this version tells me i can only install it on an i386

nowoxi

i think i just spotted my mistake thinks a billion ill go sit down and try to see if i can now work this out.

nowoxi

thanks alot that means 1 profile with the right bandwidth settings will do fine.

nowoxi

we dont have daylight savungs in nigeria so i presum thats not the problem, do i need to disable it. what do you think i should do about the lag

nowoxi

does this mean that if i add 2 users to 1 profile they will all share that allocation.

nowoxi

i am in west central africa some am 1hour afead and thats what i set then i use an ntp server to syncronize and its very correct as i believe but i dont know what to set under dst. i noticed that there is a dst panel under clock and it isnt talked about in any manual. so maybe thats the problem

nowoxi

well, i think thaty is fir the wirelesslan interface not for the wds interface. i idid that for the wireless lan interface. the main problem is that i made a wds connection with a linksys. i can see that the linksys eith ddwrt firmware establishs a connection with my mikrotik because it appears in t...

nowoxi

Everytime i set a rule in my firewall to start working at a particular time it always starts working an hour after. please could some one help me and tell me why and what i can do to stop this. then my clients using yahoo messenger and other types of messenger get disconnected almost too often for n...

nowoxi

well how do i add a wds interface to a bridge i think i added the wlan1 interface but i dont know how to add the wds interface

nowoxi

@karyal

pleasecould you help me out i am trying tomake thta same kind of connection but the linksys has ddwrt on it and there is a connection between the 2 but i cant ping form either sides of the network

nowoxi

can i assign specific bandwidth to hotspot users ie to each individual user if am using hotspot on mikrotik

nowoxi

this didnt work for me. its like i didnt find how to bridge the links

nowoxi

no i didnt bridge any interfaces am using natting
and yes it getts nicve and steady power supply. am using an apc ups
and am using major power suuply from our power meter
so i dont htink thats the problem

or do you think it could be the nating

nowoxi

so how do i get static to work. am having th same problem
they are connecting but they are not pinging

nowoxi

where would i find bridge1 i didnt see that anywhere. i have a wds link. the remote ap connects fine but i cant ping it.

nowoxi

i really think you guys are misisng out on the idea of wds. see with wds you all you need is to connect a remote ap to power an configure it with the same settings as the base and also tell it to connect to the base with wds and thats all you have a blanket no need for any data cables or any hubs wh...

nowoxi

I tried conencting my mikorik rb532 to a linksys of one of my clients he said he wanted wds. i get the ap cpnneted to the mikrotik quite alright but i cant ping formeither side. i think its a problem with routing or maybe i dont understand the problem. someone told me mikrotik can only do wds with m...

nowoxi

it happens to almost all my clients at the same time. what do i do to stop it

nowoxi

please i dont think i understand. do you mean the queues are causing it. it happens to systems with out queues also

nowoxi

i wanted to know if there was a way to write a scrippt that could do all this with cliecks or with me just suppling the mac address time of day and ip address of the client, yes and the name so that it can generate the needed fields. can someoen please help me out here. Well because of the way i con...

nowoxi

i have noticed that most of the time my connection keeps going on and off for no reason, thats left to me anyway. the signal is still there but for a second or 2 everything disconnects and all programs online at that time need to reconnect this makes downloading very fraustrating. please what is wro...

nowoxi

i have noticed that most of the time my connection keeps going on and off for no reason, thats left to me anyway. the signal is still there but for a second or 2 everything disconnects and all programs online at that time need to reconnect this makes downloading very fraustrating. please what is wro...

nowoxi

thank you very much

nowoxi

i tried to configure my wireless network. i have 2 wireless networks but 1 wireless AP(RB500) . I then wanted to try out hotspot on 1 of the networks so i applied hotspot to the wlan interface but to the address pool of the second network expecting that this will not affect the first wireless networ...

nowoxi

they are all on the same network already

nowoxi

clients seem to connect with my AP but i cant ping the AP its connected on both sides some with good signal strenght some with bad but many of them cant ping. what i noticed was that when i check for more details in the registration table under the last ip address field it the ip there is 0.0.0.0 wh...

nowoxi

well guess what i think i fixed the problem. it was the transmit side of the pcb amplifier that was faulty. i changed it to a 1w hyperlink. well the link seems to be back to normal except that i couldnt test with long range clients. but clients could connect like be4

nowoxi

wel am about to try out everything i v learnt from this site tomorrow so i should let you in on what i think 2morrow

nowoxi

so what do you do when you are not allowed to but reapeters in some areas were they ought to be. like am not allowed to install aps at those points. i guess i still have to turn to amps. or what do u think?

nowoxi

hey ok so what do you have there or what would work for a range like mine.u can make any assumptions u want

nowoxi

bt i dont know what is causing my own problem remmebr i said the quality has dropped. i use a pcb amp. it used to cover a 1kmsq area for centirnos and atleast what i tested 3kmsq radius for out door equipment. i practically had nlos clients connect from indoor but now its all different after the las...

nowoxi

so how many basestations do you have

nowoxi

sorry about the caps. i guess i just put it there cos i mistakenly turned on the caplock button. no other reason

so u suggest i just get an opgrade on the card in stead all other stuff. then what do u think about a hyperlink amp

nowoxi

YEAH I KNOW BUT I DONT GET VERY FAR WITHOUT THEM

nowoxi

i have an mt525 board and a 1 watt pcb amp. i have being using this kinda amp for a while but they kept on packing up after 3 weeks. the last 1 i was given "cos of my devotion" i guess has being on for a while now more than 3 weeks but the problem am having with that now is that the perfor...

nowoxi

@nickb
it was the amplifier itself that always got damaged so if the amp is over powering something i believe it shouldnt be the 1 dieing out. what do u think

nowoxi

@ucheonyeaka
I would like to chat with you and if possible meet since we are both from Nigeria. I woul dlove it if we could arrange soemthign my email is nowoxi at yahoo.com and my num is 7000 775 on mtn network. what do u say?

nowoxi

@djape thanks alot for your reply so like now if i remove my amp i will have a borad 500 series, an athreos 200mw and a 15db omni antenna. how far do you think that can go at your place? Now in my place before the AMPS STARTED GOING BAD i could go 1km away with a centrino laptop and it will still co...

nowoxi

hello i dont know if i should call myself a newbie with wireless but i have being at it for a couple of months, but i have had 1 major problem i use a 1w amp and it seems to stop working every 3 weeks for no good reason it just doesnt power up again, and i have all sorts of surge protectors. Anyway ...

nowoxi

my network just goes down and i dont know y. i think its because my wireless network card has gone bad but am hoping not. i just generated a supout.rif. i v tried all rtricks i know n its still not working ps i would need some advice

nowoxi

check your nt server and make ue yu dint restic t from serving te mikotik may be by ipaddress ..

nowoxi

it works fine with me what did u do wrong. post more detailed info

nowoxi

yeah the problem is the chain u didnt specify it

nowoxi

well just check the setting that has to do with selection of a particular option in the imported file and correct the error thats all or may be u should post the whole stuff, r u importing the script to the same system u created the export from or similar system with the same board configuration. if...

nowoxi

hey ps i think i have gotten it to work but i wanna be sure i did the right thing. i enabled ntp server n client. i got too ips from the net that are ntp servers. i set my ntp server and client to unnicast. then i inserted the 2 ips into the client and applied. if this is right whats the use of the ...

nowoxi

i was just abou tto post the same message. PLEASE WE NEED HELP FAST
why does it keep changing after a reboot.

my board is a 500 series

nowoxi

if it answers what ur asking
users on the same subnet use the same bandwidth and users on different subnet use the bandwidth you set for its subnet. the size of the subnet at that point doesnt matter.

nowoxi

nowoxi

now ur getting the hang of it. if u v any problems after reading then u can ask

nowoxi

WHAT DO YOU MEAN THEY WOUNT WORK YOU TRIED IT RIGHT. SO WHAT YOU DOING AND WHAT GOES WRONG?
THEN IF YOU WANT TO USE ANY OTHER TYPE OF CONTROL YOU WILL NEED TO MARK THE FLOW OF THE TRAFFIC YOU WANT TO SHAPE BEFORE YOU CAN SHAPE IT.

I HOPE THAT HELPS!!

nowoxi

well i know that is possible by specifing it singly within the queues table but i dont know of any way that can be automatic. i know if you set the queus mannually u can get everyone up. then for safer work u can so that no connection is left unhandled u can specify an amount of bandwidth to everyot...

nowoxi

so i guess you want to ensure each connection has a download rate of 100kb/s
or that each ip has a max of 100kb/s
or you want connection of a pair of ip's to be limited to 100kb/s

nowoxi

i realyl did not get your question. what do you want the firewalls to do

nowoxi

@DirectWireless i noticed it seems you know about script writing on mikrotik. is it possible that i can write a script that will add certain options to system like. when i have a new customer because am not using hotspot, i have to use ACCESS LIST IP FIREWALL QUEUES to ensure that the customers dont...

nowoxi

i think his said it all

nowoxi

thanks a million i would guess i would get to work and see what i can make of the info. 3mb is very coool for the throught put so

i like it

nowoxi

i almost 4 got i dont know much about using 900hz. how do i go about it. then i think am going to have to get a license for that. apart from that can thaat carry much bandwidth

nowoxi

@dwright thanks i tried removing the amp but what i got was improved reception for close clients and clients about 2.2Km away disconnected immediately. then in my config; i forgot to mention i put the 800mW amp in the mikrotik box then connected it to the antenna so its high on the mast. which is ab...

nowoxi

@stapee i think we have the same seup and the same problems. what do you say we have a discussion and try to help each other out. i raised my own box 36m up. i also v a 15 dbi antenna although i soon want to change it to a 12dbi NLOS antenna i hope it improves the service. what i noticed about the e...

nowoxi

Thanks for the site am still tring to understand it though. did turning off watchdog work for you.

nowoxi

please i am using a 64m flash and am not ready to dump it yet. so am always careful and so dont use any serves that write to disk.

now i want to use web accounting and am not sure if it does. please i would like someone to answer if it does

nowoxi

I heard amps are a bad idea. do i have a problem with my config Routerboard 220 running MT 2.9.6 800mW amp 15db omni antenna Atheros ARP5213 wireless card and Routerboard 220 running MT 2.9.6 800mW amp 12db NLOS omni antenna Atheros ARP5213 wireless card Please could someone estimate the range of th...

nowoxi

so if amps are a bad idea. do i have a problem with my config Routerboard 220 running MT 2.9.6 800mW amp 15db omni antenna Atheros ARP5213 wireless card and Routerboard 220 running MT 2.9.6 800mW amp 12db NLOS omni antenna Atheros ARP5213 wireless card Please could someone estimate the range of this...

nowoxi

@INFRALINK

SO DID UPDATING the wireless package solve the problem for you.
am thinking of moving from 2.9.6 to 2.9.7 is it advisable

nowoxi

well i had that problem too. My router was practically restarting every other momment. so i removed every single option in the watchdog panel and it stopped resarting but i guess it still might not be a solution to what is making it resart but at least its not restarting anymore

nowoxi

durim

i didnt understand one lil bit of ur last post . ps be alil clearer

nowoxi

i also didnt understand ur last post. then line 4 on the post before the last is either uselss if ur policy is drop then u dont need it then if its not its better u perform drops at the end of the scripts not before the end so u dont get undesired effects NEED HELP WITH HOTSPOTS. IF YOU KNOW AN ARTI...

nowoxi

can mt blok user from viewing or browsing or access to another user in the same network(LAN)...? if can how....? and how to block user when fail to login 3 times in hotspot...? i dont know much about hotspot so i cant answer that but for the clients not vin access just disable forwarding i wont min...

nowoxi

well i think the problem is that you should accept established and related connections in all directions. i think its dropping replies to connections made to 8080. so if u accept related and established in both directions the problem should be solved 2. chain=forward ; connect-state=established ; ac...

nowoxi

wel i have a small wireless network and i use firewalls to limit connection and mange connectiond and its growing i am affraid if people get to know how i get the connection done i might have problems some one suggested HOTSPOT to me but i vnt being able to understand it let alone deploy it so i gue...

nowoxi

well i can see you have everything all joggled up. you see the way the table works is if a packets comes in throiugh a partucular port the header and a few other stuff are compared with each rule in the table and once one rule is carried out it wont go to the next rule thats the end of it another pa...

nowoxi

I have about about 30 routers which I provide hotspot for clients connected with wireless and viruses was the thing that give me a hadache so I had to think so much about a solution because I setup the hotspot on ethernet card and conect the AP via it and the most of AP's doesn't provide port filte...

nowoxi

i v a few customers connected and i am not running hotspot or anymajor services. iwas wondering if i activate hotspot hope i don tv to migrate them all to the service compulsaryly cos i just wanna lunch it and see how well its gonna work for me. then ill like to know if using it is a good oidea from...

nowoxi

i just upgraded to 2.9.6 from 2.8.2 and the security options seem to be diferent. should i remove the default option and add my own because my network uses wep normally and if i dont use it then i had v to go round changing the settings of my clients

nowoxi

am have a board 220 and i want to upgrade it to the latest version i just wanted to know if it had be okay then i also wanted to know if there is anyway of backing up the old one incase i v problems so i can revert back.
then can i transfer the old setting or do i have to recionfigure manually 1 by 1

nowoxi

they are used in ur queues

nowoxi

if you read throught the setup he also assumed one is usoing 2.8.7 upwards

nowoxi

well thanks alot that sure did help

nowoxi

will i know its old but am still running 2.8.28 can i still use the setup or do i v to upgrade

nowoxi

how do i use burst threshold and burst limt and burst time

nowoxi

I have 2 gateways on my route for 0.0.0.0/0
and i want all traffic on port 80 to go through gateway a and any other traffic to go through b. how do i do this?

nowoxi

now is here is my system resources uptime: 1h2m43s free-memory: 41532 kB total-memory: 62696 kB model: RouterBOARD 220 cpu: Geode cpu-frequency: 266 MHz cpu-load: 4 free-hdd-space: 26421 kB total-hdd-space: 61972 kB write-sect-since-reboot: 1070 write-sect-total: 224706 then my interface settings # ...

nowoxi

Well this is the settings of my board and the other stuff you asked for. the major problem i have now which is in the log that i dumped is that clients keep on disconnecting ion intervals check the log [quote] log displayed within a few ours of operation with 2 clients # oct/16/2005 14:17:52 by Rout...

nowoxi

I have gotten the file off the box. but i v also solved the problem. one of my clients cloned the mac address of his system and tried to connect to the box. that caused some problem for it.

nowoxi

i would have loved to do that but am a novice everytime i get to export to console i dont know how to remove it from the system

nowoxi

the troublr doesnt seem to stop. i reset my MK and tried to start afresh and what do i get a fresh problem. i setup the addresses, create the route enable all traffic(no firewall ) and masqurade connections form my wireess to my lan. what do i get a connection to the wireless interface but non to th...

nowoxi

guess what ur wrong it gives an error

CONNECTION TIME OUT!!

nowoxi

hmmm sweet thanks but hmmm whats that supposed to do
help me login or help me turn on the safe mode.

nowoxi

please please please how do i activate and use safe mode. i guessed there should be something like that but its too late now i guess this is for next time. i didnt disable the interfaces just the bridge. maybe you should try disabling the brdge too :cry: (in safe mode, to see if the same happens to ...

nowoxi

i was hoping i wount have to do that. then up i go to the top of the mast to bring it down.

now i have a female/male serialport cable is that going to work. i have a board 220.

nowoxi

i dont think that would work with disabled adpters since the the bridge is disabled

nowoxi

AM USING A MICROTIK POE ANTENNA SO THE BOX IS OUTSIDE ON MY MAST. I WAS TRING TO RECONFIGURE THE ARCHITECTURE OF TH NETWORK. I HAVE A BRIDGE TURNED ON AND THE LAN AND WLAN ADAPTERS WHERE CONNECTED TO IT. I THEN STUPIDLY DISABLED THE BRIDGE WITHOUT REMOVING THE ADAPTERS FROM IT SO I HAVE ISABLED THE ...

nowoxi

anyone intrested by a tutorial of setting up a PPPoE server?

am interested

nowoxi

count me in........

btw dhcp n enabled address which one is better for the security.....?

well it depends on the kinna measures you take. you could enable dhcp but still block unregistered ips or use something like raduis server to authenticate
or use registered ips

nowoxi

thanks it works its real cool

nowoxi

hook me up as your third student

nowoxi

alright so what are we doing about it

nowoxi

am also intersted

nowoxi

so there iis nothing like excessive data losses and so on in the log. then check the wireless tables to see the signal strength if the clients are in proper range. then are they outdoor equipments or indoor.....

nowoxi

check the log is there any error message when the clients disconnects. if there is then what is it.

nowoxi

Am new to wireless networks at list in large scales. i had only being working on indoors for a while. i just got a mikrotik box software verion 2.8.28 with a 15dbi omni and i have 3 clients 2 indoor dlinks and a senao 14dbi panel outdoor radio. i wasnt expecting to have much problems but i am. i not...

nowoxi

the version is v2.8.28. so thats why i am wondering because when i went through the forum i saw that it was 2.9 that had the problem i am having. what else could be the cause -- frequency, bandwidth,signal strength, particular type of data. please i need help for real.

nowoxi

am a new user of mikrotik router. i just started a wireless network do am in the test stage but there is a problem i have noticed which i odnt understand why it happens. When i want connect with some clients it doesnt connect.when i check the log it says LOST EXCESSIVE DATA RETRIES. what can i do to...

Search found 154 matches