I have the same problem !

Any sugestions ?

ROS 3.2 Dude 3.1

in “/tool e-mail” can be changed the port for the email server? for example to change from port 25 to the 250, how can be done this?

I think it would be somewhat helpful to gather some realworld input from ppl who use large cell batteries and inverters to setup test links / ups backup ect.. i guess just list discription of battery and equpiment: ill start: rb 112 + 1 NMP 8602 running at 26dB 18v block transformer cheap inverter ...

it would be good that in the next release add something like p2p=all-p2p / queue-p2p / only-drop-p2p for firewall mangle

then one could drop all p2p that cannot be queue and queue all p2p that can be queue

can you include this in 2.9.26?

I have 2 installations on FM radio towers. On both installations I have the same issue as shielder, when radio is off i have 10db better signals then when it on. On one installation where FM radio is using 2KW booster I can't make atheros to work at all, tried all known atheros cards, sr2 too. Pris...

securex, MikroTik RouterOS already can detect this encrypted traffic, and successfully block it. It is also used in uTorrent and Azureus. it would be good that in the next release add something like p2p=all-p2p / queue-p2p / only-drop-p2p for firewall mangle then one could drop all p2p that cannot ...

I have some links between 15km and 25km with R532 in 5.8ghz and I use nstreme, polling and framer policy=best fit, the ping is of 8 - 12ms, but without nstreme, polling and framer policy, it is of 1 - 3ms
is it better not to use nstreme in these links?

I have just upgraded from 2.9.13 and MSN/Skype stopped working.

me too

It's should be great
I vote to MUM Sudamerica!

Maxi

me too

I have a p2p with 2 routers 532 - ver. 2.9.12 - licenses 5 + extra-channel, with SR5. In the 2 routers I have activated superchannel in frecuency mode, but when I select a frequency different to the standard (for example 5835) I don't have link, if for example use 5805 the link works ok. Which is my...

What polarity (horizontal or vertical) have the antenna of the 5 GHz Client Packages (RIC/522)?

I've got one SR5 on full power on RB532 at 210 feet. POE 12V supply and I don't have problems

I see the same when connecting to a RB532 board.. Although, it only peaks for about a second and then drops when its done establishing the connection. I'm running 2.9.6 as well.. I have the same problem, the mikrotik support told me that in the next version (2.9.7) they will solve several problems ...

I use a SR5 and a R52 in a routerboard 532 without problems

are you all using RouterBOARD500 ? do you use NTP as your time source, or is your clock not set?

I use RouterBOARD500 and use NTP, my clock is set OK, my graphs not stored on disk

my graphs not stored on disk too, I have RB532 and lvl 5 v2.9.6