MikroTik

imrankosi

Try to use delaythreshold option in dhcp server settings

imrankosi

first of all your public ip should be in routed mode . separate interface is required for public ip. or go for virtual interface for publice ip or for hotspot . choice is yours . if you wann i can configure this for you.

imran.khan@xtremenetworks.co.in

imrankosi

use firewall to block such connections

imrankosi

check this picture

aa1.JPG

imrankosi

export your firewall rule

imrankosi

hi,
use winbox > open from mac address in terminal window type this / system reset press y . that's all

imrankosi

hi,
username and password is not case sensitive. this is not possible in mikrotik till now

imrankosi

ok i can try i am mikrotik certified consultant imran.khan@xtremenetworks.co.in

imrankosi

/ip firewall filter add action=drop chain=input connection-state=invalid add chain=input connection-state=related add chain=input connection-state=established add chain=input src-address=wan ip add chain=input src-address=lan ip add chain=input comment=Winbox dst-port=8291 protocol=tcp add chain=inp...

imrankosi

did you enable api service in mikrotik and configure api in radius service. if no the configure api. most probable you will get the solution

imrankosi

did you redirect http traffic port 80 to 8080 in mikrotik firewall. also d't forget to block unauthorized use of 8080 in filter rule

imrankosi

most probable with in next 24 hrs

imrankosi

its depend on the location of the remote machine but than also the activity will be logged only of remote machine. not the team viewer user ip.

imrankosi

hi, first of d't mix hotspot interface with your static ip. you should run both setup parallel . for wireless create virtual interface to connect the user how have the static ip. some basic changes are also required in your router . give access i will do this for you. for logs your radius manager ca...

imrankosi

no . nv2 is also not supported

imrankosi

for this you have to redirect all traffic to specified port of the software which can handle the logs send by the mikrotik

imrankosi

its not possible

imrankosi

facebook.JPG

filter.JPG

check the attachments

imrankosi

first of all hotspot can not by pass public ip. if you want to provide public ( real ip) to customers . First of all you have to divide real ip into small subnet , also you have not mentioned how man public ip you have. after this you have to run hotspot and real ip pool parallel. if you need some h...

imrankosi

creating hotspot is very simple. lot of videos are available on internet. just hit hotspot select desired interface follow on screen instruction that's it

need karma if helped

imrankosi

check dhcp server in ip

imrankosi

yeah that's possible use this rule:

chain=dstnat action=dst-nat to-addresses=lan ip to-ports=22
protocol=tcp dst-address=wan ip dst-port=22

this rule will solve your issue but remember you wan should have real or live ip

give karma if you got solution for your issue

imrankosi

no change in firewall required

but recheck nat rule especially this rule chain=srcnat action=masquerade out-interface=ether1 ( eth1=your wan ip)

give karma if i helped you

imrankosi

i think u wann to view from wan ip

for this you should have live ip or real ip on mikrotik than only you can view from wan

imrankosi

no issue where you want to implement mikrotik

provide me mikrotik ip
password

imrankosi

thanks for the great help but what about the chain forward? or other option

imrankosi

i need the rule to allow direct connection to specified ip . proxy is trasprant

imrankosi

hello members, Recently i configured squid proxy on ubuntu to catch youtube and http websites . Ever thing is running fine can get 96mbps downloading speed to customer once the file is cached in ubuntu server. but one issue is there with some users they c't access sites d't open properly. i had cre...

imrankosi

hello members, Recently i configured squid proxy on ubuntu to catch youtube and http websites . Ever thing is running fine can get 96mbps downloading speed to customer once the file is cached in ubuntu server. but one issue is there with some users they c't access sites d't open properly. i had crea...

imrankosi

i think you should go for loadbalancing in which you can define the priority to specified interface(wan) . some other benefits also you will get

need karma if i helped you

imrankosi

first try this in winbox open ur router board ip> hotspot>server> hit hotspot setup button > select lan interface >clink next > configure dns that's it. for hotspot page design. its comes with default mikrotik login page . however you can design by your own or you can hire web designer which will co...

imrankosi

check the following

ip should be on correct interface
check nat rule in firewall
disable dhcp on wan if running

give karma if i helped you

imrankosi

configure your network with radius manager ( available in market with track report of users) and hotspot that's it all problem will be solve from this.

give karma if i helped yoy

imrankosi

First of all let me clear one thing HOTSPOT C'T BE USED LINE RADIUSMANAGER. both hotspot and radiusmanager have different task hotspot bind the user speed,data,mac etc and radius manage keeps the database , profile,send informant to hotspot regarding bandwidth etc. and your problem is also not clear...

imrankosi

for this 1. enable usermanager in any mikrotik box or you can go for third party radius software for management but usermanager is free to use. 2. configure hotspot mikrotik and usermanager mikrotik so they both communicate with each other 3 . create users and profile in usermanager . ( profile= pac...

imrankosi

hello masters, I am facing a strange problem some time i saw a very heavy traffic on my server upto 90mbps . In mikrotik when i uses torch to check from where this traffic is comming their is some public ip which is creating this proble I want to have access to server to some specified ip ( xx.xx.xx...

imrankosi

Hi, i have this common problem that my user expire before expire of the profile and client get the error message that no valid profile find. in that case i have to reset his download and upload traffic . that it start working . user can login. Any body have the solution for this . Thanks in advance

imrankosi

hi ,
i need the script so that when i add new profile to the user his old data counter should reset to zero

Thanks In Advance

imrankosi

When ever i reboot the router or it get get rebooted with some reason . my schedule stop working . i have to manually set the time again and it start working again . i am attaching this image to show what is the problem i am facing

imrankosi

hi,
I am using kiwi syslog server

Hi dude,
is there any syslog server i can use to collect routerboard remote log???

my tools is ubuntu 12.04 LTS...
appreciated it.

imrankosi

any idea for this new update in 5 years

imrankosi

hi, i have limited bandwidth and i wann to use the bandwith effeciently .for the i wann the user who are just browsing they will get the prority after that voip and than youtube than other traffice and in the last i wann the p2p and torrents. and body have the idea to manage this . i great trouble n...

imrankosi

Then we create quueue tree, and change Max upload and download speed under DSL_IN and DSL_OUT (global-in gloabal-out) and chanege priority rules to suit your needs: /queue tree add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=\ 10000000 max-limit=11000000 name=DSL_IN packet-mar...

imrankosi

going interface =lan or wan???????????????????????????????????

Hi.i want to setup hotsop on out going interface.is it possible? HOW?

imrankosi

just enable hotspot on that interface only

give KARMA If i helped you

hi.i have 2 interfaces on mikrotik.i want run hotspot only on one interface.how can i do it?how

imrankosi

it possible, you have to redirect your traffic from 80 port to another port, enable web proxy, after this you need log software to receive logs from your router. a bit difficult but it is very important to keep the copy of the activity of the customers give karma if i helped you How Can i Monitor us...

imrankosi

hi, your problem has so many reason, but try this if it helps, under hotspot server how many ip you have alloued on per mac give karma if i helped you I have been using a RB2011 to manage a Hotel WiFi network for the past six months. The only complaint I have had is that a lot of people have to keep...

imrankosi

hi, i tested this<my router ip>/usermgr dose't work with my um also. just type this<my router ip>/userman .every thing will be fine Give Karma if i helped you I am a new Mikrotik user and I am trying to set up user manager for the first time on a RouterBoard751G with level 4 licence. I have installe...

imrankosi

from where to download old verson of mikrotik router os for 133 router board

imrankosi

Is your router properly syncronized with a NTP server, and do you have proper time zone selected?

ntp and time zone is configured properley

imrankosi

Hi there,
is it possibile to use an hosts IP list to gave them access without hotspot authentication?

?????????????????????????????????????????????????????????????????????

imrankosi

hi experts,
I created a profile with time limit 19:00:00 to 08:00:00 but its not working i got this message access denied at this time . may i know where i am wrong . thanks i advance

imrankosi

Newbeinet its good information i hope so its useful for me and others..

Thanks dear.

hi if the information is useful for . please give me karma so that i will also be inspired to do thsese things

imrankosi

for this you have to configure user manager with hotspot .than you can have rx tx limits on each and ever user give karma if i helped you please add option to select profile or manually enter rx tx limit in ip binding tab to limit bind users (ip->hotspot->ip binding) wBw, Muhammad Nasir Javed

imrankosi

you need just a public ip on your router THAT'S ONLY IS REQUIRED TO HAVE ACCESS ON THE ROUTER FROM ANYwhere . What do you mean about the cameras? surveillance camera = ip camera.we need it for home,office,..etc to set ip cemera we need somthigs/ 1- static ip 2- ddns 3- internet connection like router

imrankosi

hi, for routing mode you need i big ip pool at least /27 pool is required so that subnetting can be done and ip can be provided to the customer Hello Friends, I have Mikrotik 450g Router , i need to config and provide to customer Public Ip , i have WAN IP : 123.xxx.117.77/30 ( Wan Public Ip) (123.xx...

imrankosi

you are supposed to put static ip on the router give karma if i helped you hi every one ...suppose you have any mikrotik device such as sextant 5hnd .you use this unit as internet connection . the question is / can we access this device from any where in the world ( by using the internet ) what i ha...

imrankosi

do you wann to configure um with hotspot

I have set access to UM before hotspot login. So I want to log what username is typed in the um. Just like the logs in UM. but it can be shown in MT log.

imrankosi

Hi
how to implement cache server with um and which software to use for cacheing server

imrankosi

i d't got you. please clear your qustion

Hello
I want to log usermanager login by users... or login attempt into the usermanger
Is it possible.

imrankosi

hi,
my network is in routing mode the problem is that my static ip got listed in pbl,xblandsbl database. is there a way to avoid this .
thanks in advance

imrankosi

numbers of user depends on the users activities and bandwidth they will use. importantly upload speed numbers of users will depend on the quality of signals they are getting, if one client is getting poor signals , this user will effect all the users. no board performance will not be effected. chain...

imrankosi

problem might be with your dns putting proper dns will solve this problem Hi, I need help from you we are using Mikrotik 450G RouterBoard on our Network it is fine for all but from few weens we have major issue with mail.yahoo.com web site it is not opening ofter restarted DNS client service at loca...

imrankosi

its work My userman database crashed. I could not login to the userman. I attempt to rebuild the database and then I was able to login to the userman even though it said the rebuild failed. Now I cannot edit user accounts because its telling me that the database read only. I see this log message on ...

imrankosi

hi,
but you have not given me karama. i am waiting positively

Update:

Tested on OS 5.14 & 5.19

/tool user-manager customer print

Thanks for original post!

imrankosi

hi dude, its works First, user must login hotspot to access usermanager panel: 1. user login hotspot -> http://[ my-hotspot-ip ]/login 2. user login usermanager -> http://[ my-router-ip ]/user To access usermanager, You must use the IP address that is not used by the hotspot server. user change pass...

imrankosi

its a good idea mikrotik might know the answer. i am also waiting for the solution

imrankosi

Hi
you want to use user manager for 10000 users?
i think if you use other radius server like free radius your result is better.

what is in free radius server . why not to go with um

imrankosi

why not usermanager ?????????????/
what special in free radius server

imrankosi

hi,
can am body tell me which serve machine to purchase which will best suited to my requirement . i have 200mb of bandwidth and have approx 10000 users

imrankosi

Thank you so much!!!!!

It works

can you put the screen shot of the logo

imrankosi

c't login invalid usernam and password

imrankosi

can u help me to do dis

imrankosi

i am looking for the solution with in mikrotik usermanager. i run my network of routers not on servers.

imrankosi

Hi,
I am using um for a long time and works file . But now i wann to create user who will get 1mbps speed upto 10 Gb and after 10Gb the user will get the speed of 256 kbps upto 20gb after this the plan will expire.
Hopping for some positive replies .
thanks in advance

imrankosi

hi ,
have you tried kiwi syslog server. I am using this and works file

imrankosi

hi,
Its possible to view and save the log file of the user (what they did on internet ). use web proxy, and nat setting and software to recive the logs .

imrankosi

how can we secure our wan ip and port to be used by some other peoples via proxy

imrankosi

do u wann to configure usermanager . just tell me how many router u have

imrankosi

hi, i wann to know that is it possible to have two profile for a user for example i wann a user to get 256kbps from 9am to 8pm and 1mbps
from 8pm to 9am

thanks in advance

imrankosi

can anybody know the command to reset accounting stop command for um users

imrankosi

how to install software when it get corrupted no console port????????/

imrankosi

i think your idea will not work because usermanager runs on rounting mode no bridging have to configure 2 hotspot Hi, I am trying to use a simple RB-751u-2Hud for a little hotel, that has a few wired rooms, and a wireless antenna. I am setting up a hotspot on it. I would like to bridge the 2.4 GHz A...

imrankosi

its ok

Thanks alot for all the help.

I would like to try do it myself following a guide, if that doesnt work we can use team viewer.

Thats right my eth1 is a dhcp client of the adal modem. My eth2's(hotspot interface) has an ip of 10.0.0.1.

Looking forward to hearing from you.

Many thanks

imrankosi

no that will not solve the problem you will have to format the mt by consol cable this will solve the problem . give karma if i helped you Hello guys, i'm updating a RB433 form ROS 4.7 to the latest 5.11. After copying the .npk to files menu in winbox, and reboot it. I cannot ping the RB433 IP and i...

imrankosi

its not that easy to setup usermanager need deep knowledge of routers than you can or u can hire expert to do this or just gave me the access of your machine than i can configure for you. about your um pass open you mikrotik from winbox in which you have installed usermanager go to terminal type thi...

imrankosi

ohhhhhh

just install team viewer on your computer your team viewer will give you userid and password and i will get your machin access
than i will configure your router to use um

Hi

Thanks alot.

I dont know how to give you remote access. Could you explain to me how to?

imrankosi

hummmmmm ok so you need to implement usermanager with hotspot. jut gave me remote accessssss to me i will do it for you thanks and regards d't forget to give karama if i helped you Please help! I am struggling to set up a hotspot. I have everything working, had my users added under ip-hotspot in win...

imrankosi

Does anyone know where I can get RB fixed? Or where I can get service manuals? My distributer says they don't have any and never heard of it. I hear they are easy to fix but I need schematic's. Any help will be welcome. David I have the RB411, RB433 from mikrotik. if you need it, you may can ask fr...

imrankosi

what is tls certificate and what is the use of this

hope i will get the good relpay

thanks in advance

imrankosi

can any body help to know what it means

thanks and Regards

imrankosi

just use usermanager with your hotspot.

it will solve all your problems

thanks and regards

Imran Khan

imrankosi

just simply update the verson of mt to the new one 5.5 all your data base will also be updated

d't forget to give karma if i solved your problem

imrankosi

yeah you can use the same freq. better to use different frequ. to each pointto point

imrankosi

hello masters all.... please help me, how to reset users manager?? because I forgot the password to access the user manager. thanks for the help ok no need to reset usermanage. just open your usermanager router in winbox and in terminal just type this command /tool usermanager customer print after ...

imrankosi

we use Mikrotik at our ISP I want to use a LOG -server to track the Internet Connections of all users.This option is requested from Prosecutor Office The users use NAT to reach the Internet . Which is the best mode to implement this option :NETFlow or NAT Table connections export ? Regards Ilir do ...

imrankosi

Imran can i have yours email id....i m stucked at somewhere while configuring mikrotik.

imran_cool024@yahoo.com

imrankosi

hai imrankosi

if you dnt have any problem im interested with you to do this.

ok i can do for you

imrankosi

just add the ip in queues option and rember to select the interface for that ip . if you forget to select the interface than it will create trouble for you . after you add the quese give tham the specified speed in max speed and min speed . than we we run script in terminal the command is interface ...

imrankosi

please mail me your network scnario . on my mail id imran_cool024@yahoo.com

imrankosi

will you tell me the command to enable logging web proxy

co ordinate with me on my mail id imran_cool024@yahoo.com

imrankosi

contact me on my mail id
imran_cool024@yahoo.com

imrankosi

ok
imran_cool024@yhaoo.com

imrankosi

yes,
imran_cool024@yahoo.com

imrankosi

i told you use queues option . or please give me your networking scnario so that we can look into your problem

imrankosi

use the queues option this will solve the problem.

imrankosi

i d't this mt will create any proble. its a power full router first mention your senario of your network than we can solve this problem

imrankosi

just enable web proxy in / system logging. than enable web proxy in /ip webproxy after this we have to put some rules in firewall. now we are ready with logging report . now we need software to save the reports of the client we can use kiwi syslog for this . rember the port for this 514 which will b...

imrankosi

hi , its very simple. first you have to use remote service on router, enable web proxy some firewall rules are also required . and a software which will save the logs of your customers ( what they did on the internet on what time and date ). if you wann i can help you to configure this we can use te...

imrankosi

what with dymanic queue??? usermanager creates dynamic queue

imrankosi

Ya it is possible..

first let me know are you using any radius manager or like that to receive logs from mikrotik???

yeah , i use radius and know how to get logs from mk

imrankosi

hi i wann to know is it possible to give 256kbps in day and 1 mbps in night when we are using usermanager 5.4 with hotspot. if possible please tell the steps to do this

thanks and regards

imrankosi

hi everbody,
i am using usermanager 5.4 please tell me the steps to take the back up of usermanager. so that
if i have to change the router simpley i have to restore the backup.

thanks and regards

imrankosi

hi, why you want to block the client after 30 day your 24 online will also block him from login . or you can use mikrotik usermanager and hot spot for billing and bandwith purpose . and its good you d't neet to pay for amc for your server . and it is good even ques will be created dynamically.

imrankosi

hi ,csickles
can you help me to install this software.

hope for positive replay

imrankosi

hi all ,
is there any free software from which we can have webproxy log . and they can be saved and can be viewed according to user date time site they used

imrankosi

for this you have to usermanager with hotspot . by doing this you will be having full command on your user.you can give data limit, speed limit, time limit and also you can bind there mac address so that your net can not be miss used

imrankosi

for this you have to usermanager with hotspot . by doing this you will be having full command on your user.you can give data limit, speed limit, time limit and also you can bind there mac address so that your net can not be miss used

imrankosi

fewi i have some doubts is it possible to configure on windows machine or any software is required for doing this
if yes let me have the name of hat software

imrankosi

ok but where i will get the log report and how i can get all the reports generated on remote machine

imrankosi

Hi i am also gtting the same problem. please help us to solve this problem

imrankosi

Hi i am also gtting the same problem. please help us to solve this problem

imrankosi

please tell me the steps to enable this

imrankosi

please tell me the steps to enable this

imrankosi

hi i am using user manager with hot spot . what i wann is i wann to save all the logs of customers ( time ,date and site visited)
please tell me the steps to do this

imrankosi

hi i am using user manager with hotspot. did any body know how to give 1 m in day and 2 mb at night to particular customers using queues option

imrankosi

you can use mac filltering option

d/t forgot to give karam

imrankosi

first of all thank, what i wann is i have one pool /24 of publice ip. now i wann to put all these ip on mikrotik 433AH . now i want to give 16 public ip to my client who is connected via 411. here the ip on ether1 of client (mikrotik 411) must become gateway to the client. please tell me the steps t...

imrankosi

Respected all,
Please help to solve my problem . i wann ip pool to be forwarded on particulatr ip. I am looking for this but i d't find any where. Please help to solve this

imrankosi

hi i wann to setup a network. please help me to do this . i have 254 public ip. what i wann is that my One MT should be in AP bridge mode and another is station mode. i whan second router's ether1 shoud have 110.189.73.97/30 ip . And this ip must becom gateway to the client please tell the proper us...

imrankosi

can any told me how to use ip traffic flow and its advantages

imrankosi

hi i want this ip pool BB.172.XX.32/27 forwarded to BB.172.XX.2. please tell me the steps to do this on mikrotik where one mikrotik is in bridge mode and another one in station mode

imrankosi

Please specify your configration of /ppp server and /ppp client
also change your mrru=1600

imrankosi

You can use station mode

imrankosi

please help me to use routes with public ip subnetting so that ether1 of mikrotik router become gateway to the client. and client must get the public ip

imrankosi

Some Body know the step to configur mikrotik 411 in routing mode and subnetting

imrankosi

Yes public Ip

imrankosi

Thanks a lot for clearing the doubt

imrankosi

can any body know the step for subnetting and routing the live ip

imrankosi

Hi ,
Can any body tell me to how to enable BCP . Which is necessary to creat VPN .

imrankosi

Ok , i have two locations both having public ip . i just wann to connect them as it feels like they are on lan. I shoul be able to share printers and files even the share folders of the pc . Please tell me the configration to do this. i will be very thank full

imrankosi

Hi ,
i wann to creat vpn connection with two RB411. Both radio has the live ip with different ISP. Please tell the detail configuration to do this

imrankosi

that's nightmare man..

my suggestion : don't connect more than 20 clients on 1 AP, specially omni antenna, you will be facing huge problem. try to use sectoral antena to split your clients.

i am using sectoral antena

imrankosi

the reply-only should be set on the interface that are facing your customer (wlan) not ether thanx shielder for your replay and for your time give to me i tried your solution but still i can communicate with the router i follow these steps 1 i creat arp table where i put the mac and ip than i make ...

imrankosi

static ARP should be good enough for you. try to set your interface ARP to "reply-only", that way, no more dynamic ARP, only allowed mac could ping your gateway,but you need to define each mac-address of your client to specific ip address (ip/arp). i tried arp but it d't work , i make eth...

imrankosi

static ARP should be good enough for you. try to set your interface ARP to "reply-only", that way, no more dynamic ARP, only allowed mac could ping your gateway,but you need to define each mac-address of your client to specific ip address (ip/arp). i tried arp but it d't work , i make eth...

imrankosi

i have 532 and it has near about 30 registared clients i am facing a major prob that is latency start incrasing end with drops it happens mostly in noon time where is the prob. please help me

waiting for reply
imran khan

imrankosi

do hav yahoo messenger.? and yahoo messenger ID?
yes

did u have solution for my prob

imrankosi

do hav yahoo messenger.? and yahoo messenger ID?

yes

imrankosi

are u frm KOSI which is near to MATHURA
yes who is this
well are u a ISP and are u attached wid sify..

will you tell me about ur self

imrankosi

are u frm KOSI which is near to MATHURA

yes who is this

imrankosi

hi

i want to restrict port scanning softwares as they harm our clients. I tried a lot but d't find the solution for this. HELP ME

IMRAN KHAN
919219533213

imrankosi

hi every one,
i want to restrict users from mac those who change there mac addressesand their IP and creat troble to me(my network is on wireless).Please provide me the solution for this

waiting for replay

Imran Khan

Search found 153 matches