MikroTik

konstg

Thank you a lot, Caci99!

konstg

Can you post the nat rule where you redirect your LAN to the proxy? It should be something like this: /ip firewall nat add chain=dstnat protocol=tcp dst-port=80 in-interface=LAN action=redirect to-ports=8080 Yes, the same, but without 'in-interface=LAN'. Is it mandatory? You should protect the webp...

konstg

Tnanks a lot, Caci99! I'll give a look! What can you say about this strange behaviour: 231 Gb is used from 307 Gb and we don't see on what! :shock: file_list1.JPG I create access only for my network to the Proxy. But it is long time while we can see a message BUILDING CACHE. May be smth goes wrong??...

konstg

Hello to all!

We have problems with "very slow internet" in our office. Below is attached pic with interfaces. Seems strange that
public interface has normal speed, on other hand, local interface has low speed.
Can somebody advice us on this matter.....?

mikr01.JPG

konstg

Ok, thanks !

konstg

Hello to all!

How we can to monitor Rx an Tx params on public interface and to write it in a log(I mean, with some period)?

konstg

Samir, in this case users on this Access Point will have addresses from Mikrotik dhcp transparently?

konstg

check sysytem --> package

if hotspot is showing there , you dont need anything else,
if not there download form mikrotik site hotspot for 5.22 and install

Samir, we have installed all packages. I meant what kind of equip do we need next?

konstg

Hello!

We have installed ROS v.5.22 on PC. What do we need to setup WI-FI using Mikrotik? Can we use our NETGEAR wi-fi router for this?

konstg

Hello to all! :) I read this article http://wiki.mikrotik.com/wiki/MikroTik_RouterOS_and_Windows_XP_IPSec/L2TP and done all described steps. From Windows XP I get following error: "error 768 - the connection attempt failed because of failure to encrypt data." Any ideas? :shock: Thanks in a...

konstg

Mangle rules:

konstg

Here two routes, they are created dynamically. May be here is some contradiction?
Tracert show only asterisks...

Cos when route2 is for 192.168.100.50, it works...

konstg

Drop rules are disabled. The same...

konstg

yes, local_ether.

so, you can ping in one direction, and at the same time cannot ping in another one? maybe check you firewall?..

Yes, can ping in one direction only...

konstg

have you enabled Proxy ARP on your ether interface?

Yes, I have. You mean local_ether?

konstg

Hello to all! In "PPP" module in tab "Interface" I created new "PPTP Server" (pptp-in1) for user "user1". Then I made enabled "PPTP Server" (using checkbox). Then in tab "Secrets" I created new "user1" with "Local Address&quo...

konstg

thank you, Leo.

konstg

If you buy a license now you are able to upgrade to V5 later without paying for the upgrade. Excuse me, leoktv, did you mean license level 4 for v.4.6 can be upgradable to v.5? I asked because recently read this page: http://wiki.mikrotik.com/wiki/Manual:License_levels and was going to buy exactly ...

konstg

Thanks a lot, leoktv!

You really lighten up my licence issue

konstg

Hi to all! I downloaded RouterOS 5 beta1. For some reason I use Sun VirtualBox to test RouterOS itself and create another virtual machines as client computers. On version 4.6 it works well. But v.5 can't be installed from .iso in virtual machine, don't know why. I installed it successfully only via ...

konstg

Ok, thanks a lot to Chupaka, I've done it

But another qst: my hotspot user have "Limit Bytes In" and "Limit Bytes Out". After user reached limits he logged off. But how I can reset counters on the next day, for example?

konstg

userman is RouterOS package, it runs on the same machine

anyway you will need some authorization (at least Hotspot in 'MAC' mode) for accounting. DHCP do not have accounting functions

And what should I do with my DHCP if I made a hotspot server?

konstg

userman is RouterOS package, it runs on the same machine anyway you will need some authorization (at least Hotspot in 'MAC' mode) for accounting. DHCP do not have accounting functions May I ask you to give me more details? I'm not esp experienced in RouterOS. Some steps would be perfect. Excuse me ...

konstg

No other ways rather than userman? Using only RouterOS?

Because I limit speed already and using other tools looks slightly not convinient...

I don't need in HOTSPOT; my clients are in my LAN, using DHCP.

konstg

Hello to all!

How I can make quotas on users(range or list) in my LAN to prevent them download (upload) some quantity of traffic dayly(monthly etc)? If you can, give me some details, please...

Thanks in advance,
Konstantin.

konstg

Many thanks

konstg

Hello to all! I have my routeros 4.5 on PC. I create a masquerading rule in NAT tab in IP->Firewall. Client workstation works well. Then I enabled Web Proxy to introduce rules for web access. When I made browser on client go through proxy then web rules works, if I uncheck proxy in browser - client ...

konstg

I'll try to see...

konstg

Does anyone know how to count total traffic went through public interface during some period of time? Or kind of this?

Thanks in advance,
Konstantin.

konstg

Mangle+address lists+queue tree
http://wiki.mikrotik.com/wiki/Bandwidth ... and_Queues there are nice examples
"QoS Best Practice @ MUM Czech Republic 2009" is really the best

You are great, man. Thank you

konstg

Hello guys! I have my routeros on x86 based PC. It works well after been installed; ok. I need to limit upload and download speed for users in my LAN. Well, I did it by creating Simple Queue. It works for ALL users. How I can create some groups or separate users by IP's in order to have different sp...

konstg

"Wise man said..."

that I have to add follow lines to hide internal network:

header_access X-Cache deny all
header_access X-Cache-Lookup deny all
header_access Age deny all
header_access Via deny all

Where I can add these lines using WebBox?

konstg

using all mentioned above sites I can see my INTERNAL ip

How to hide it using RouterOS? Which rules or so?

konstg

does this show your public IP ? http://ip.changeip.com/

I wonder if that detector is showing you the proxy server IP, which is internal to the http request sometimes.

I'll check it on Tuesday only...

konstg

... I have added such a rule already...

therefore, I have access to the internet...

konstg

Hello to all!

Some question

I installed RouterOS successfully. When I trying to check my ip address with http://www.cmyip.com/
I see my address in the local net 192.168.1.254 instead of address of public interface.

How I can hide it?

Thanks in advance.

konstg

Hello guys! I'm testing RouterOS 3.19. I orginized subnet inside my corporate net. It works correctly. I have access to the Internet via my router. But I use proxy from my corporate net. When I create proxy using RouterOS and set parent proxy then parent proxy refuse connections. This is MS ISA serv...

konstg

Thanks a lot for your answers

konstg

Nobody knows?

konstg

Hello to all! I want to ask all guys: what is the real advantages of RouterOS over other known solutions, based on win,*nix and hardware? It will be very helpful if it comes in the list of advantages... The point is that I have to explain people why we need RouterOS not only in popular manner :shock...

Search found 40 matches