Hi, I have Mikrotik dual radio device and client end is TP-link. Iconfigured in ap-p2mp mode, but deauthenticate the device by mikrotik. what can i dO? how to solve this problem. tplink will communicate with mikrotik or not??? bala Let me know your config of Mikrotik AP ( Prism ? or atheros ?), if ...

Cards based on the Atheros 5211 chipset (b/a) -- so you would only be able to use 'b' in 2.5GHz.

I Think , Senao SL 3054 MP Plus Aries2 will be cheaper card for 2.5Ghz deployments.

hi all guys , just test the new version of MT 2.9.23 those guys do somthing with the 5006 chipset i noticed biiiig really big diffrent in wirless performance and TX power i push normal card to 500MW and working perfect so far pinging become very stable i dont know why just dont miss it guys Hi talo...

sir i want to upload 2.3ghz frequency in my MT
in b/g band what is the procedure.

Are you from INDIA ? , If you are in INDIA it is impossible to use that frequency.check your country regulatory domain as per normis statement.

kutty: try to use the new netinstall from the webpage, it might fix it matt: yes, any RB5XX can be upgraded hi normis, i have used that netinstall program (latest version) but no use, my RB532 was not Recognized by the netinstall program. I have same problem with one more RB532 also. please try to ...

ya I'm from india

i too from india....... can u give me peronal email ID ?

HI, Thanks for ur reply, I am not able to send firmware file using X-modem protocol, i am getting Error like (remote Host not responding ) . If i login into the bootloader , then i can change the setup like boot from Ethernet ...., then i can proceed to netinstall. Here the problem is not able upgra...

Hi,

MT Router would perform better than that VIP, we got good result by replacing VIP with MT router .are you from India ?.

HI all, I am facing problem with RB500, suddenly stops working. i have tried all options winbox,mac-telnet, Serial cable. In serial cable using hyper terminal ,i can see that RouterBoot 1.4 beta Routerboard 532 hanging..................... i have tried the routerboard firmware options using x-modem ...

Have you tried with Winbox program ? (MAC-Winbox)

yes i have tried mac-winbox, same result i am getting
please tell me any other alternative to get the board workin


kutty,

There is not any differentce between power options. Try baud-rate=9600. Have you tried to access Router via Mac-Winbox ? yes i have tried using mac address of ether1 , when i am connecting using neighbour discovery , it is asking for login name login ---> admin enter pwd ----> enter then it showing...

I had problems connecting via the serial cable and found that the cable I was using was bad or had an incorrect pin-out.. Get a hold of a known good cable and try connecting again. thanks for quick reply, let me know one thing, when connecting thru serial cable, in which way i should power up the b...

please any one can help me out from this problem.

does the router turn on the LEDs when booting? what settings did you enter when connecting with serial console? yes the router turn on the LED's,i did the power up using POE (ether1), i did this setup for the serial console in the hyper terminal 115200 8 data bits 1 stop bits no parity(none) hardwa...

hi everybody, i have RB500 MT board, recently purchased one.when i connect the board to the PC , i am not able to see any ip or mac address config in neighbor discovery.then i started connecting with special null modem cable (DB9) i am not able to see any bootup in the hyperterminal.please help in t...