can you post an example?

I have read the manual several times. I am a hands on individual. The books do nothing but confuse me. I sent you a message with my printout to see if you can lead me in the right direction.

ok I am successfully porting. Now I have a new dilemma. I want to forward only ports 4569 and 5631-5632 to an internal server. Do I have to create a new rule to do this?

Firewall NAt Dump 0 chain=srcnat src-address=10.176.80.0/20 action=masquerade 1 X chain=dstnat dst-address=xx.xx.xx.91 action=dst-nat to-addresses=10.176.88.1 to-ports=0-65535 2 X chain=srcnat src-address=10.176.88.1 action=src-nat to-addresses=xx.xx.xx.91 to-ports=0-65535 3 X chain=dstnat dst-addre...

I have setup the firewall with masquerade srcnat 10.176.80.0/20 then for one of my public ip's i setup /ip firewall nat add chain=dstnat dst-address=xx.xx.xx.91 action=dst-nat to-addresses=10.176.88.1 to-ports=0-65000 /ip firewall nat add chain=srcnat src-address=10.176.88.1 action=src-nat to-addres...

I have followed the documentation and am lost. I have 5 public ip's. I have a couple servers in house that I want to forward ports to. Can someone give me an example of how to do this in the Mikrotik. I have even resorted back to factory several times and started over. Still no go. Thanks in advance...

I am currently trying to impliment something like this in my own setup. Would one of you mind giving me some help doing this? Getting the hotspot page to link to a cc and allowing user to use service after cc is recieved.

Kip

Can someone point me in the right direction? I have the latest software and am lost trying to impliment Mac authentication in user man.

Kip

Thanks for the input. I will be putting it to good use.

Kip

Is there a way for me to easily reroute all port 80 traffice to a certain address or IP? I am wanting to direct all my internal pc to my citrix server web page no matter what address they add.

Kip

I am seeing a lot of inter-client traffic. Now this traffic is normally net bios and windows networking traffic. Is these a way to block this at AP?

Thanks

Kip

Are you trying to use the 5.8 as the "Backbone and the 2.4 for the clients?

I can help if this is what you are looking for.

Ok this works. Now can I use my main Mikrotik to control all my mikrotik AP's? Then all I have to do is enter their info on one box instead of each one individualy as I do now. Any pointers would be appreciated.

Kip

Can the User Manager authenticate users based on thier MAC address? If so can someone point me in the right direction?

than-you all for the replys. It is definately giving me some items to look into. With a single pc my pings are very simular to yours. Its when I started adding that it becomes an issue. I am thinking I have to many high end users on this sector. So I may split it up into 2 sectors. In the mean time ...

Ok.

I have implimened a pcq queue to limit up/down bandwidth to 1m/2m. I have an 8 meg pipe and want to keep the general traffic under a total of 4 meg. Can someone help me with a code to set this up?



Kip

I have setup a rb500 as an AP Bridge. I have the Wlan1 and ether1 bridged. One pc can connect but the ping times very from 4ms to 22ms. Once I bring other machines on the ping times jump to 1200ms or more. I bypassed the MT and the pings are 3ms. It appears that the MT bridge is creating issues. Whe...

Thanks. It is appreciated.

What is my next step to accomplish this? here is my current setup? Note I would like my 2.4 network to be a 192.168.0.1 scheme. mt1 ether1 - bridge1 wlan1 - bridge1 ip is on ether1 then wds connection to mt2 mt2 ether1 -bridge1 wlan1 -bridge1 ip is on ether1 mt1 -ether1 and wlan1 are enabled /ip add...

are you trying to do something like this?

http://forum.mikrotik.com/viewtopic.php?t=4688

Unbelievable. It works excellent. As a matter of fact I am using my connection now.

Thanks for the help. I am learning more and more every day.

This is great

Kip

thank-you for the example. I will try this and post my results.

master is wdstation-wds, ssid test, wds-mode static, wds default bridge=bridge1, ether1 ip 128.10.18.201, set to bridge 1.


Client side

station-wds, ssid test, wds-mode static, wds default bridge=bringe1, ether1 128.10.18.200, set to bridge 1.

Ok, Basically I am trying to create a bridge from my main tower to my house. Here is my setup. 128.10.18.200 LAN1---Wireless----------Wireless---WLAN1 128.10.18.201 My issue comes into play when I try to bridge the ether1 with WDS or WLAN1. The router will simply stop responding to ether1 and I have...

Thank-You very much. That worked perfectly.

Can't find the answer just, ask because someone always has an answer.

I have search everywhere for a solution and tried everything I can think of. After 2 days I have decided to ask for help.

Thanks it is appreciated.