(continued from above) 3. I have tried to separate the incoming Syslog events into several logs by dividing them by IP address. I.e. all events originating from computers with IP address from the 192.168.10.0/24 subnet should go to a log for that subnet and all events originating from computers wit...

First, I would like to extend a big THANK YOU to all of you guys / girls at Mikrotik for creating and improving The Dude. Unlike other of the posters here, I have never experienced the server service hanging or quitting unexpectedly, my system has been up-and-running for several months without glitc...

*) added option for enabling TCP SYN cookies . . . *) fixed bonding, works better with wds slaves . . . *) fixed mac address changing (improves vrrp) Please update the manual so that these new settings / possibilities can be understood! And what is a "wds slave"? Does it have anything to ...

This is the routing table in my system: [admin@MikroTik] ip route> print detail Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf 0 ADC dst-address=85.xx.xx.xx/30 prefsrc=85.xx.xx.xx interface=1-2 Bond scope=10 target-scope=0 1 ADC dst-address=192.168....

I also tried output, as suggested by that and neither worked. I still send packets from default gateway insted of marked one. I agree with LatinSuD!!! I have also tried to do policy routing on the traffic generated by the Mikrotik itself (version 2.9.10), but it is a big no-go :shock: It is possibl...

I have spent quite an amount of time with exactly this scenario, this is how I got it to work: 1. I have a router with 3 interfaces; 1 internal and two external: /interface print # NAME TYPE RX-RATE TX-RATE MTU 0 R 1-ISP1 ether 0 0 1500 1 R 2-ISP2 ether 0 0 1500 2 R 3-Internal ether 0 0 1500 3 R 1-2...