MikroTik

taglio

taglio

Hello there I've got a new device hAP mini and I've tried OpenWRT but I want to return to RouterOS. I've lost my license key because I don't save it before installing OpenWRT, was my fault.

What I could do?

taglio

Hello there.

Is possible to build an hotspot without any login page, that will always display only a URL whatever the client will type in his address bar?

Is to annunciate a web page.

taglio

*) ping times improved on Nv2 high data rate wireless links; I've got a test link to try new thinks. Signal is 70/70 TX/RX in the two chains. Radios are ubiquiti SR71-15. And the antennas are the wonderful Jirous JRC24 DUPLEX. Distance is ~15km. If you want more details i can give you radio mobile ...

taglio

reality the next month:

http://www.engadget.com/2012/04/26/netg ... ac-router/

taglio

Only as a backup xP I don't know how to make it working 100% full duplex. So there's no possibility to do a full-duplex design [one channel to TX and another to RX, NO BONDING]with two RB750GL and four SXT-G in the same broadcast domain? Any suggestion mk gurus? Martin a ver si coincidimos para tom...

taglio

Hi, we tryed to do it with the same subnet in the both sides of the link.. like one manual in the wiki. It's not possible. When we used 2x different subnets it's solved. Without static routes, like you said. Thanks, Hi Martin, how're you dude :) ? It's possible or not doing full-duplex with this os...

taglio

ping....pong...ping

taglio

hi there, i've got this escenario: two RB750G connected in the same broadcast domain by two point-to-point link builded with SXT-G, one link active and the other passive backup, all done with simple RSTP interface priority on the two 750. Now i want that traffic ONLY for/from and ip, or better a mac...

taglio

YES!!!!!

taglio

@JJCinAZ your theory sounds good, but why this behaviour doesn't appear when i do classic 802.3ad bonding within mikrotik board a cisco switches? The real story is that here in this bonding i use the roundrobin version and i'll be the cause. But i don't think so. @samsung172 In fact all the ptp wire...

taglio

taglio

Hi tik gurus! How're you guys?! A customer of mine got a very strange problem in a particular installation that is formed by three independent separated point to point NV2 links (build with WDS) bounded together by other twos routerboards that do the layer 2 bonding (round robin bonding) of the thre...

taglio

I have the same problem. Though, I found out that my client (not yours either) does not send a Parameter Request List (Option 55) in the discover packet. Therefore, the MicroTik dhcp server does not add the Subnet Mask (Option 1) in the offer. Other dhcp servers sends this Subnet Mask in any way, (...

taglio

try with 5.12 reinstalled using netinstall or CD-install (fill force key generation, as there is no other way how to change that on working system).
won't "/system reset" force key generation too?..

Why don't add a:

/system ssh generate-keys

It'll be useful.

taglio

taglio

Hi there, i've got an absurd problem and i don't understand the reason. I've got an ethernet interface of a 493AH where i've configured a listening dhcpd service. Now with many dhcp clients i don't have any problems, but with the dhcp client of "Virtual Access GW2040 3G Router " (http://ww...

taglio

Just upgraded a produccion link from 3.30 to 5.11 with WDS and nstreme. ;( got the same error !!!!!!!!!!! 11:31:09 wireless,info 00:15:6D:XXXXXX@wlan1: failed to connect, on 5805, receiv ed deauth: class 2 frame received (6) 11:32:48 wireless,info 00:15:6D:XXXXXX@wlan1: failed to connect, on 5805, r...

taglio

I'v found another APs x86 with fresh installed 5.7 routeros that have got the same problem. This is the output of the ssh cliente when i try to connecto to it: taglio@hammer:~/Work/34T/firmware/mikrotik$ ssh admin@172.31.33.15 Received disconnect from 172.31.33.15: 3: taglio@hammer:~/Work/34T/firmwa...

taglio

barcelona.

taglio

user don't use key auth, it used simple auth.

taglio

Dear janisk, the problem is that i cannot open ssh connections to the x86 host. When i open a connection to the sshd i received those error message.

taglio

Hi mikrotik people, i've got an x86 powered by 5.7 that give me a problem with ssh. When a user try to log it with this protocol, mikrotik with normal level off logging return two ssh,error: "key not loaded" "host pub key not loaded" I attach the ssh,debug log. Can someone help me?

taglio

didn't you see the table at the bottom of the page you linked to ??

OPS....sorry i miss it!

taglio

Hi there, in this PDF: https://docs.google.com/viewer?a=v&q=cache:J4nE8Zs18bgJ:www.routerboard.com/pricelist/download_file.php%3Ffile_id%3D162+RB411UAHR&hl=en&pid=bl&srcid=ADGEESg0QaJjUryTYBOZuvO81MrZpir5bAw2PR1cgEqzDE4Gq1IJVKHpgduMFvoZSblPjZm_EEN7ciWbZIzm6AC2hAEinfWuEK3R1zRrhmJ1fgb8...

taglio

sergejs i reccomend to you the blog of this old guru: http://en.wikipedia.org/wiki/Jim_Gettys You can find it here: http://gettys.wordpress.com Please read about the theme "bufferbloat". In a network operating system like mikrotik it'll be very interesting that a user can set txqueuelen an...

taglio

Hi there, how're you mk gurus?¿

There's in winbox or RouterOS console the manner to set the value txqueuelen of the interfaces?

I mean can i do this in some kind of way:

#ifconfig eth0 txqueuelen <NN>

Thank you,

regards,

RG

taglio

It's clearly a huge mikrotik routeros problem Fumi22.

Why do you thing noone of official support team reply to this topic: http://forum.mikrotik.com/viewtopic.php?f=14&t=40219

They simply passed to reply cause TCP bandwidth collapsed when we use two MIMOS radio [with or without nstreme-dual]

taglio

... simply reply you cannot....or something else.. i've got 3 costumers that 'rew8ing for a solution..

taglio

I'll write in english, sorry. But, like you're alive and online, could you please read this: http://forum.mikrotik.com/viewtopic.php?f=14&t=40219.

I've opened also a ticket.

thank you.

taglio

a ver si te podemos ayudar.

taglio

Hey martin has llamado en oficina?

taglio

still no reply- still w8ing for a solution mk support..

taglio

Anyone can help us?? Mikrotik support?

taglio

ok..so.. it's seem that this configuration work correctly with mishaM equipment... Can anyone tell me if have a running link with those specification?!? In my experience it doesn't work. Simply the vpls2 interface doesn't go up [no running]. I want to bound two vpls interface to obtain the sum of th...

taglio

This is a real big problem.

Have someone found a solution???

Please reply,

RG.

taglio

What radio do you use for 3x3 mimo?

taglio

Hi there... so it's normal that i cannot use 5ghz-turbo with r52n or i miss something?

regards.

RG

taglio

PONG...

taglio

Ok, so it seems that is better use different pol. but we can use same polarity antennas [and we lost some benefits].

Internal laptop MIMO antennas use different pol. antennas?? Or simply use 1 chain?

Regards,

RG

taglio

Thank you for rapid reply. Ok i can understand this for professional equipment connection [base station + CPE subscriber]. But let me speak about connection between a MIMO AP [simply image routerboard 411A + an R52N radio] and netbooks or notebooks or pda..... and so on. No i have two MIMO chain on ...

taglio

Hi there, please help me :? i don't understand how i have to choose MIMO antennas. In the actuality i use mikrotik, ubiquiti and compex MIMO radios, all 2x2 MIMO. I have in my knowledge a big lack...i don't understand what kind of MIMO antenna i have to use in my real world application. Simply imagi...

taglio

We have generally 50-200 queues, and multiple users logging in. We always have to:

Right-click: uncheck "Packet Marks"
Right-click: check TX Bytes
Right-click: check RX Bytes
Right-click: check Total Tx Bytes
Right-click: check Total Rx Bytes

...

So do i.

taglio

It's this important feature planned in the future?

Regards.

taglio

Mk team why don't add this important feature to winbox?

taglio

try to use 'Exit' button instead of 'X'

I use mk from 2 years.... every day i want this feature.... and now i know how to do it!!!!

Thank youuuuuuuuuuuuuuuuuuuuuuuuu

taglio

Correct! routeros is a router. Or you see some IOS OS with a bind? To run bind you have to use a dedicated hardware [running other SO like linux or FreeBSD {that is better}].

my 2 cents.

taglio

FreeBSD rules!

[taglio@tsunami]/home/taglio(101): uptime
11:11AM  up 821 days, 15:44, 1 user, load averages: 0.02, 0.01, 0.00
[taglio@tsunami]/home/taglio(102):

taglio

Do you have deleted user-manager store? For me this completly delete UM config.

taglio

Hi there.

Another thing about the bug.

If you fresh install the system and do a backup then use user-manager feature, when you restore the backup the user-manager still have old configuration.

Best Regards,

RG.

taglio

Anyone can confirm this?

taglio

Hi there.

I've just found this "error".

When I done a /system reset-configuracion on a 3.30 system [and also 3.24] i notice that user-manager settings doesn't be resetted to default values.

Is this a bug?

Can someone else confirm it?

Nice Regards,

RG.

taglio

@Chupaka: i agree with you about that is better to send email to support at mikrotik dot com. But i also thing that using forum is better for community help.

So now i'll send email to please answer at this post

taglio

No reply mk team?

taglio

I know that this is an old POST, but a customer of mine have exactly this problem. Anyone have a solution?

Please reply,

Best Regards,

RG.

taglio

like 2 months. using it every day for work and at home [like 10 hour a day].

No problem since i've change it... For sure look here

http://googleblog.blogspot.com/2009/12/ ... c-dns.html

I've just change my DNS to the google one

taglio

And why changing from OPENDNS to ISP provider in my mikrotik dns proxy solve COMPLETLY the problem......

taglio

Hi there, A cuple of months ago also I've noticed the problem with www.google.com. I've noticed it at the same time at the office and at home. In the two case the design is a simple router NAT that connect to a network and give connection to other clients, using diffent type of medium and passing di...

taglio

Yes i can confirm that mk cards work perfectly. Thank you for reply.

Regards.

taglio

Hi there, i've just installed 4.3, thank you mikrotik for hard word! In twitter about 2/3 days ago i've read about a new software feature of RouterOS, the Spectrum Analyzer. Also i've read that work only with: Currently this feature is supported only for Atheros Merlin chips. AR9220, AR9280, AR9223....

taglio

Nobody have to share something about this topic?

taglio

Ok i've done it and it works without more hardware! Only the one in the original thread of Ibersystem: http://forum.mikrotik.com/download/file.php?id=511 Now i want to share some information with you, mikrotik users. 1) I can see loadbalancing working with LACP only when i test with more than one ho...

taglio

Sorry for reopen an old POST, but....

It's sure that it's not possible that want to do Ibersystems in this POST???

(I'm trying it with two Netgear GS108T with last firmware and 4 RB433AH with 4.1 firmware).

Thank you.

taglio

Hi there! Sorry for posting here i don't know if i have to post in FORWARDING PROTOCOLS sections...[probably yes]. I know that best mesh configuracion is using HWMP+ protocol of mikrotik. But thinking about config a MESH network with WDS + RSTP [or STP if there are other SO that don't support the ra...

taglio

Ok!

Thank you Normis for quick response.

Have a nice day,

Greetings from Barcelona.

taglio

[toor@extreme] /user group> add policy=
ftp    password  read    sniff  telnet  web     write
local  policy    reboot  ssh    test    winbox  !
[toor@extreme] /user group>

What of those is the one that can limit this opcion?

taglio

Hi there,

got a question for you kit gurus.

It's possible to freeze opcion country=the_country_that_i_want in wireless configuracion?

With this feature i have the security that a client couldn't use frequency not allowed in the country where he lives.

Thank you very much,

Best Regards.

taglio

It doesn't work. VLAN 50 doesn't arrive to central. Anyone can tell me how can i do it?

Thank you in advance.

Best Regards.

taglio

Hi there; sorry for reopen the POST but my customer haven't find a solution and with the informacion that you have give me also i'm in doubt. Esquema.png The problem is from 2 to Central. With RB411A i want to tag traffic untagged that generate the pc with ip 10.158.50.202/24. Traffic from the telep...

taglio

Try 3.27

taglio

>>*) added l2mtu interface parameter with ability to configure for
interfaces that support it;

What is it?

taglio

It's meaning that now we can use AT commands with ppp client connected??

taglio

prerouting works when upload
postrouting works when download

It's sure???

taglio

Hi there,

a customer of mine have done me a question that i cannot reply.

It's possible to mark all traffic passing for an interface that don't have a VLAN tag with a new VLAN tag?

Regards.

taglio

You can put two dhcp server with two different ip pool...

1: /ip pool add name=1 ranges=192.168.1.2-192.168.1.100
2: /ip pool add name=2 ranges=192.168.1.101-192.168.1.200

taglio

/interface wireless set wlan1 band=5ghz-turbo

taglio

Yes i think so.

taglio

in my experience pppoe-client perfectly run under 3.22.

However to downgrade to 3.15 simply connect to serial port, format NAND and install with netinstall.

taglio

I guess where I'm confused now is does routerOS automatically know what interface these gateways are to be associate with based on the address assigned each interface? Yes it's automatic. Do I need any /ip firewall mangle or /ip firewall nat rules as discussed in the load balancing Wiki? I don't th...

taglio

yes

taglio

/ip firewall nat
add action=masquerade chain=srcnat comment="" disabled=no out-interface=ether1 src-address=192.168.60.0/24
/ip route remove 4

taglio

So CRD should be in mode=bridge? What wds-mode should be? /interface wireless set wlan1 wds-mode=static wds-default-bridge=none mode=ap-bridge Next create a bridge and put in ports wlan1,wds1,[ether1???] is that wds-address or mac-address? Do this in the Crossroad: /interface wireless wds add maste...

taglio

To build a repeater just put the wireless with same frequency and ssid of the 433. Next create a WDS interface with the mac address of the wlan1 of the 433. In the 433 do the same WDS interface with the mac address of the wlan1 of the Crossroad.

taglio

You don't have permission to access /nmap-dist/nmap-4.85BETA5-setup.exe on this server.

Just curious.... the download server from insecure.org has got this error.

taglio

read here : http://forum.mikrotik.com/viewtopic.php?f=2&t=29412

taglio

I personal prefer a balance between noise floor and freq usage.

taglio

There's a way that produce some false positive. You can use the "content" option in the firewall rule. Imagine that the url of the site is: www.mikrotik.com. You can authorize traffic to this site with this simple rule: /ip firewall filter add action=accept chain=forward comment="&quo...

taglio

I can confirm that it works under 3.22 mipsbe arch.

taglio

You can do this in another way with queues tree pcq and HTB interfaces. You can find more explicacion of this process at http://mum.mikrotik.com/presentations/CZ09/QoS_Megis.pdf . First at all mangle traffic from your local network: /ip firewall mangle add action=accept chain=forward comment="#...

taglio

I can confirm this bug. The system is a 3.22 mikrotik on a Pc Engines alix6b2 board. /user set system password=01234567890123456789012345678901 /user pr detail Flags: X - disabled 0 ;;; system default user name="system" group=full address=0.0.0.0/0 /user group pr detail 0 name="read&q...

taglio

I can confirm that this bug exist also with a AP mikrotik 3.22 [433AH] with a CM9-GP and a windows client connect to it:

taglio

Hi there, i have the same problem and i don't know if i resolve it in a good way. I simply want to shape traffic between users in a dinamic way [without using address-list and without know the bandwith that i have]. Please mikrotik gurus help us in this critical configuracion!! [toor@extreme] /ip fi...

taglio

[toor@extreme] /ip proxy access> export # mar/16/2009 11:44:07 by RouterOS 3.20 # software id = 4H1M-LTT # /ip proxy access add action=deny comment="" disabled=no dst-host=*porn* add action=deny comment="" disabled=no dst-host=*sex* add action=deny comment="" disabled=n...

taglio

/ip firewall filter add action=add-src-to-address-list address-list=black_list \ address-list-timeout=1d chain=input comment="Add ddos to adress list" \ connection-limit=10,32 disabled=no protocol=tcp add action=log chain=input comment="Log ddos" connection-limit=3,32 disabled=\ ...

taglio

Hi there, i'm currently working on a project based on mikrotik routeros and a x86 low power consume board [AMD 1 GHz @ 133 MHz FSB]. The processor is a single core arch, are there any suggestion in the use of APIC=enabled/disabled? For my interpretation APIC will be disabled and /system hardware set...

taglio

Hi there,

i can confirm that it pass sometimes also with:

1) SierraWireless PCMCIA AirCard 880
2) SierraWireless MINI PCI-E MC8775
3) SierraWireless MINI PCI-E MC8780

Best Regards

taglio

Here you have the output of the console with bios debug level set to high.

If you can please read it,

Thank you very much,

Nice Regards.

taglio

Thank's for reply to all:

udis: i've bought two directly from you, 2 weeks ago. One go right the other has got this problem.
aaa: i'll check asap.

Best Regards.

taglio

Hi there, i've got a strange problem with a new rb230. When routeros has started CPU frequency is at 100Mhz: [admin@904G] > /system resource print uptime: 11m9s version: "3.20" free-memory: 117672kB total-memory: 127072kB model: "RouterBOARD 230" cpu: "Geode" cpu-count:...

Search found 99 matches