MikroTik

wisperer

i- could not get it going

anyone else try it

wisperer

is it possible to send another member pm or im?

wisperer

they just installed it with a modem and a cisco 851 router.

will probably need someone like Butch or Dennis Burgess to do it

I tried going from router to Mikrotik just to try switching from dsl to cable
but could not get that working even though I got instructions on dsl reports

wisperer

Hi

Up to now I have been using two dsl mlpp lines on my 450G (ether 1 and 2) It gives me 7 down 1 up

The 450 is the dhcp server

I just ordered a cable line its 10 down 1 up.

Is load balancing my best choice in this case. All 70 subs are served out of ether 5 (it goes to my backhaul)

thanks

wisperer

whr r u from n whr do u require this setup We are from India !! you will have to contact Mikrotik distributors to get answers to those questions. You will have to look hard to find some who do demos. Google :( tells me that there is a distributor in Mubai! You might also look for a consultant in In...

wisperer

login is always admin
in winbox you should see the ip address login and password
they can be saved or as you say deleted

wisperer

that a very wide question

do you have them linked up and what kind of signal are you getting?

wisperer

probably easier to use the many "usb sticks" provided by most carriers

wisperer

if you are saying : the radio inside and the antenna 100 feet away, that won't work. you would have to run cat five and have a radio in outdoor enclosure : max distance 300 feet Poe powers the radio over cat 5 use a RB411 in outdoor enclosure with lmr 400 to your antenna (or enclosure with panel ant...

wisperer

so if the customers radio is busy at the time (uploading or downloading)
can the http time be longer?

sometimes I see good ping times but the customer has slow speed.

can we see packet loss somehow?

thanks

wisperer

when I choose what to monitor, I understand what the ping speed is but
I am not sure how to interpret the ssh and http times

thanks

wisperer

Lebowski: I spoke to soon

yes the "remove resolved" works. When I turned by bac they all re appeared

I followed your instructions and that works but it could be a long process to clear them all out.

wisperer

just went to beta 2 and the transition was smooth everything came back up with the "remove resolved" and it works thank you Normis: There has been a lot of criticism in other forums about how cold people were here regarding getting help. I must say I do not agree with them. Thanks again all

wisperer

Thanks for the help

I thought I had seen "remove resolved" before but its not there anymore? 4.0 beta 1

Might be me: (just out of surgery)

Tried to attach print screen file but it is too large

wisperer

can I clear the outages list

would like to clear one device at a time or all of them at the same time

thanks

wisperer

I seem to be having a problem with spam

I see this script on Butch's blog: I am looking at the last one his favorites
http://blog.butchevans.com/2008/12/spam ... -routeros/

can I copy and paste that in my router? But if I have a problem how do I diable it

thanks

wisperer

might sound simple but you are asking a lot
an hour with a consultant could do wonders

or split up your questions.
you can control how much speed goes to clients with simple queues
and look at user manager: it can do a lot more

wisperer

the 5 watt amp will screw things up for sure

XR5 will do that distance also

wisperer

ok what I really want to do is use ntop with my 450G but someone suggested Scrutinizer on dsl reports

any suggestions on how to do that on a windows based pc

thank you

wisperer

I am trying to use traffic flow with Scrutinizer
Have enabled traffic flow and put in address of computer with scrutinizer
It says its not getting any flows: what port do I put in Mikrotik
thanks

wisperer

I pull the phone line off the modem to simulate a line failure

I lose internet of the router when I do that.

wisperer

I use 450G with ether 1 ad 2 for mlpp with Teksavvy

When I lose one line (modem) I lose internet

Most people tell me they only lose on line (speed)

wisperer

I think Butch's script catches Limewire from the number of open connections.

should be easy for someone to recommend something like that or go to http://www.butchevans.com

I'll take that back: just tested it and it does not pick up Limewire but it does pick up Vuze right away.

wisperer

I think Butch's script catches Limewire from the number of open connections.

should be easy for someone to recommend something like that or go to www.butchevans.com

wisperer

google confirmed that http://www.cplus.org/rmw/dataen.html might do it

wisperer

we have done that but for some reason, we sometimes had to use a cross over cable

wisperer

its working

thanks a lot: if followed route instructions and entered dns manually in remote router

then in hotspot setup I removed masquerade and dns showed up on its own

can't thank you enough as well as Richard in Maryland

wisperer

thanks for your help Tim I tried setting up that route and it only gives me hotspot page. No net. strangely, if I try google, does not go anywhere. If I try an address in the network, 10.5 I get login page, no net. Show me logged in in hotspot (active) with a 192.168 .3.254 add. I had a member here ...

wisperer

main router is 10.5.50.1/24 hotspot on it is 192.168.2.1 main router gives dhcp on 10.5.50. network hotspot is giving out 192.168.2.1 addresses all is fine there all ap's on the network are 10.5.50.10 and up (bridged) so remote rb 450 was given 10.5.50.28/24 I can reach it no problem and get net whe...

wisperer

still having problems with this dsl - 450G (dhcp) 10.5.50.1/24 - switch - ap's (back haul) - clients (Ubnt) - ap's I have hotspot setup on main router as 192.168.2.1/24 on ether 4 works fine I want to setup a 450 remotely on the network to do hotspot. I plug it in to the switch above for testing (af...

wisperer

how far do you want to go?

perfect los?

wisperer

I have finally got hotspot working on my local router with user manager installed. (still learning that!) I have plans to install one remotely on my network. I took a 450 gave it a static address (10.5 range of my network) and configured the hotspot on 192.168.3.1 ( local router uses 192.168.2.1 for...

wisperer

thanks Normis

when I try to drag 4.10 all packages or combined package,ç

I get a message "could not download file write failed"

I have a spare 450 I am trying it on

It is the files for 400 series mipsbe.npk

wisperer

I have 450G with hotspot activated

I drag all packages 4.6 and reboot router and don't see user manager
in winbox anywhere

What am I doing wrong

thanks

wisperer

i can't seem to drag the image (jpeg) in the file section
not sure what the problem is : file extension? its jpeg
maybe I have to resize, its 287 x 218 14.5 kb
thanks

wisperer

I edited the page with CoffeCup free editor and put in the image and it comes up when I open the browser In hotspot/img I only have 3 files img/login.html img/login6.html (think I created that one) img/logobottom.png Don't see a background jpeg file do I drop the image file (jpeg) there? is there a ...

wisperer

I use only 5.8 for customers: I am in urban setting. Have a few on 2.4 but its too crowded. I use XR5 on 411 as ap with normal settings and clients are mostly Ubnt, some 411's set as client or wds and all is fine. No Nstreme I would use Mikrotik clients everywhere for the functionality but its hard ...

wisperer

At this point, its almost like : try them on the ground before putting them back up in the air. Do you have a pair of simple 5G radios like Nanostation 5 . Even these will work at that distance. The cost: $200 a pair. You could use them temporarily. If they do not work, you do not have los: do you h...

wisperer

I have changed the basic login page on the hotspot and loaded on to my 450G All the text is fine but the jpeg I inserted does not show up. If I look at the file with Firefox or IE it is fine. When I log in to the hotspot, the page appears, text is great and there is a question ? in the middle for th...

wisperer

thank you Lebowski; When I look at the graph on each client, most will show spike in only one service like http while ping is good or ssh spike while ping is good. If I am to monitor only one function, I guess it should be ping? I used solarwinds in the past: nice function was % packet loss for each...

wisperer

when I scroll over too one device, I see the graph showing ping, http and ssh

I understand the ping time result but is the http showing traffic?

Why the ssh, would the result not be much the same as a ping?

thanks

wisperer

maybe the storm forced a device to go back to default

wisperer

http://www.xagyl.com/store/product.php? ... 1&featured

very good choice and very good supplier

wisperer

thanks: when I downloaded upgrade, it did not include ntp server. Did that and pointed all ap's to my router and all is fine.

I notice now that the "combined package" does not have all the files that are in "all files"

wisperer

on my router, I have NTP server to time.nrc.ca and it keeps time no problem.

but any other ap's that are bridged do not keep time or get info once NTP is enabled.

what am I doing wrong?

thxs

wisperer

it is called "ipoque" it is german company's product. it works as a bridge and can limit or block everything by subscriber. For example I have lots of people play world of warcraft and i prioritized wow packets, so they can play wow very well when the internet using is very high. just won...

wisperer

I use a 450 g for dhcp and I just set up a simple queue for every ip it gives out

That allows me to see in real time what each ip is doing, the total use and everything else in the pull down menu

wisperer

I also would like to display ping time on map and have not been able to.

Anyone can help?

wisperer

I have an RB150 as router for small wireless network. My modem is set to bridge and feeds dsl into ether 1 It was configured by a friend of mine Ether 5 is for my RB532 ap Ether 1, 2, 3, 4 are for in house computers at the moment. I was explained that this way my in house computers would be protecte...

Search found 49 matches