Hi Please see diagram attached Our ISP has offered us with a Public IP list of /26 sub-net. We currently have 4 sites that each require a public IP In our ISP's Data center we have a Mikrotik CCR 1036 and each site respectively has a Mikrotik RB1100AH The ISP has setup separate Vlans from each of th...

Is anyone still having this issue? We had a similar fault and I found that the issue was actually caused by Spanning tree on the switches. We have a RB1000 connected to a set of switches running spanning tree. The issue was that the customer edge ports on switches were not configured as edge ports, ...

Hi All I have the following scenario and I really need a solution. Please see attached picture I have a omintic connected to Ether 1 on a Cisco Switch. The Cisco Switch has Vlan 10, vlan 11 and Untagged vlan 12(green) with the switch's native vlan set to 12 so Im basically getting vlan10,11 and unta...

Hi I have a bridge with 2 vlans, one running PPPoE and the other is used for VoIP. I see that the bridge filter has the option to use IP firewall for PPPoE. This is where i hit a blank. Where under IP Firewall Filter and/or Mangle do I get the option to identify and mark unencrypted PPPoE packets. I...

Hi

Is there a way to have a script to mark Authenticated mail connections and allow that via IP Firewall mangle and Filter rules, ie drop mail that's unauthenticated on port 25 but allow authenticated mail on port 25

Please let me know

Hi all I have a question regarding Queues that i need to get my head around. Here is the example scenario. Back-haul Internet is supplied at 10Mb/s 10 users with PCs in DHCP pool. Queue is set to limit at 5mb ie I want to reserve an additional 5Mb for servers etc How do I control the queue so that u...

Hi I have a mikrotik RB1100AH configured to authenticate users in FreeRadius. All is working fine, I do however have concerns regarding Interim updates and PPPoE Session disconnects. Mikrotik does not support POD (packets of Disconnect) so for my radius server to have stop times I use scheduler in M...

Hi All I'm in the process of applying shaped traffic rules on mikrotik. I basically need some help with Mangle and Queues. As a test I have created a mangle rule that marks traffic on Port 80 as well as everything that's not port 80 0 chain=forward action=mark-packet new-packet-mark=Internet port 80...

Hi All I have a mikrotik RB1100 in our head office with OVPN server enabled. I have various 411UAHR routerboards that I use for my remote networks and the management thereof. I want to create Open-VPN tunnels to my head office. I will do this by connecting via 3G from the 411UAHR boards to the heado...

Hi We use an ISP that does bonding via ADSL lines and they've installed a Cisco router in our office. The said that MTU must be set to 1300 in order for browsing etc to work right. I have my Mikrotik plugged into the Cisco and Ive enabled a PPPoE server with MTU size 1300. When users connect via PPP...

Hi I know this post is very old but I need some help with accounting interim updates and freeradius. my setup is as follows: I have a mikrotik onsite with a public static IP. At our Hosting site I have freeradius running on a VPS also with public static IP The site Mikrotik uses radius and points to...

Hi Is there a way where you can assign PPPoE IPs after a sucsessfull logon that the iP of the User is always the same whenever he logs on. We currenly use free radius with attributes, framed IP address and framed subnet which works but how can i do the same by just using a mikrotik. is this at all p...

Hi Thanks for the reply Here is the IP addresses detai l: 0 address=10.100.0.1/24 network=10.100.0.0 broadcast=10.100.0.255 interface=ether1 actual-interface=ether1 1 address=172.16.0.2/29 network=172.16.0.0 broadcast=172.16.0.7 interface=ether2 actual-interface=ether2 IP Route detail 0 A S dst-addr...

Hi I would like to use Mikrotik with an external Squid transparent proxy. I would however like to know, how do you setup the forwarding rules on Mikrotik so that the IP of the user is passed to the squid. If you do a normal dstnat rule the Mikrotik passes its own IP to squid. :? Im sure you can do i...

Thanks for advice Its working ok. the only issue is that with every connected pppoe session, the session gets a variable session ID. If you setup a probe to listen via SNMP and the user disconnects, when that specific user reconnects it will get a new session ID for pppoe (even though the username i...

Hi I have setup web proxy to listen on default port 8080. i have also created the Nat rule chain=dstnat action=redirect to-ports=8080 protocol=tcp src-address=172.17.0.0/24 dst-port=80 The rule is working fine but I can't seem to get any browsing done on the allowed web pages in the proxy. Do i need...

Hi

Can I use Dude to display connected PPPoE clients on a specific Mikrotik on a network map using SNMP?
The reason is I want to see when connected users's pppoe drops. I want to display all connected users on a map so that its easy to see on our Helpdesk which users are no longer connected

Thanks

I did play with the rules but no joy.

can you perhaps give some detail as to how to configure this. i have never used web proxy before

Hi Im using Freeradius with Mikrotik. I have created a PPPoE server with two profiles, one for active users and one for capped users. when a user is capped the Freeradius via Mikrotik puts the user in a specified profile and browsing, mail etc stops working. This all works perfect I added in the fir...

Hi

Its working now thanks for the help

Hi

I need help to write a script that will send me an alert via Email if one of my hosts go down.
How can i do this via Netwatch. I have already entered the mail server details on the mikrotik.

Thanks in advance

Hi I have difficulty setting up a PPTP connection between two Mikrotiks on the Internet. The scenario is as follows: We have a Mikrotik at our Headoffice that is behind a Uncapped data link and the Mikrotik has a public static IP assigned to it i.e. you can connect to it via your browser and typing ...

Hi We are using a Mikrotik router do do natting onto local devices on our network. Each device has a private static ip but we nat via the firewall to the devices through the Mikrotik router and then link a public static IP to it. This way we can have public IPs on our devices for remote communicatio...

Hi We are using a Mikrotik router do do natting onto local devices on our network. Each device has a private static ip but we nat via the firewall to the devices through the Mikrotik router and then link a public static IP to it. This way we can have public IPs on our devices for remote communicatio...

Hi. I have a mikrotik and freeradius config that works great. The Radius server is hosted in a hosting environment with static piblic iP. The mikrotik is connected to a router and also has a public static ip. i have configured the radius and all works great. My problem now is this that i have instal...

Hi Is it possible to NAT multiple internal private network IPs to one external public IP using ports. i.e. internal IPS are 192.168.1.10 - 20 with a firewall NAT rule for dstnat and srcnat to 196.212.116.99. then using :10000 - 10020 as ports. a browser will then have the following http://196.212.11...

Thanks a mil. Ill try it out

Hi

How do I add a given range of IPs (by my ISP) on a Mikrotik so that I can give Servers on my network these Public Static IPs. So that these servers can be accessed via the net through the Mikrotik.
Any suggestions ?

Thanks

Hi. Is it possible to bond two DSL lines each with their own Cisco Routers? The scenario that i have is the following: Two ADSL lines each with a 1600 Cisco router. The routers each have 5 static puplic IPs. I want to use the mikrotik as a PPPoE server(which i have already setup) and I want to bond ...

Hi I am remotely connecting to IP cameras on a LAN. I have one static Public IP that i want to use ports on. I use the Mikrotik IP 196.212.218.46:1000 to port 1010. I setup a dstnat and destination ip(IP of Mikrotik) selected IPv6 and the port nr. My action is then to netmap to the private IP of cam...

Hi. How do i configure mikrotik as a router. My ISP has given me the following info: my Mikrotik ip is 41.162.56.8/31 and the ISP ie, my first hop is 41.162.56.8/31 I have no idea how to do this. i am fairly new with Mikrotik. I also main use Winbox as i am not yet so good with terminal command line...