bandwidth management.GIF bandwidth management.GIF We have two lines at one of our network sites one is from Airtel (E1 - Primary line ) with 16 Public IPs and other is from BSNL which is normal broadband connection. We want to configure both lines of auto failover with NAT. If primary line goes dow...

Dear Normis,
Please provide me the script for the various alarm indications mentioned below asap

1. Tx Power failure
2. Rx RSSI below threshold
3. Radio Sync. loss

Dear All,
I had a link running from site A (AP mode) to site B (Client mode). I want to add another radio at site A, so that when one radio gets down the link will shift to another radio without breaking the ping. Can you send me settings? Should I have to use any router for that?

try to reset the device into default settings `/system reset`

marcel

Tried, but not working. Can you give me 3.20 version firmware because on this all the devices are working fine, but 1% I want to make sure by downloading with 3.20 firmware.

Dear Normis
I am running RB433Ah with 3 compex wireless cards in base-station and when I am inserting the radio cable in switch, the self ping of the radio is going in 4 digits. This scenario is coming in bench test, and I had tried by changing the firmware.
Can you help me, urgently

Thanks Srecko,
but when I am trying to load this setting, it is showing "Not yet implement. only in final version"

So when this final version will come.

I installed this. But I am getting some errors, when I am running the exe. It is showing Unable to Locate Component This application has failed to start because QtNetwork4.dll was not found. re-installing the application may fix this problem. I had installed it many times, but always I am getting tg...

Hey,

screenshot looks brilliant... but I'm getting asked for a key when I try to install the software.. is it not free?

The application is FREE. Serial numbers, see here
http://forum.mikrotikhack.com/index.php?topic=32.0

I dont in which language this site is, please tell me the english link.

water do absorbed and reflect signals,
with your ~75m height and los, use Hpol.

Also can heavy dust create some interference?
Actually a chimney is there and continuous fire and dust comes from it and it is approximately 50m from our signal route, so can it create some interference?
Urgent

(Rb433AH + R5H card)x2 should be a good combination for any of those links. I'll let others comment about antennas and stuff Normis: I had used 433 with SR5 card, but it was not giving proper throughput and on the same link when I had used 133 with R52 350, it is running excellent Cards wise SR5 is...

Yes, RouterBOARD and I am not a direct distributor of Mikrotik, but I am using it in large quantity and only the distributors who had done training is having the rights to change the routerboards name, and put their configuration on it like www.abc.com and new name to the RouterBOARD. Basically some...

wht is the height of the mast at both ends for the 65 km link.

Height is not an issue, more than sufficient height is there.

what policies are you talking about?

Means we can open the radio in telnet mode only and for the next time that will be read only for others

Can anybody tell me about the board and mini PCI combination for 20Km, 40Km and 65km PTP links respectively. and troughput should be 10Mb, 8Mb and 6Mb respectively. I had used 433AH with XR5 card with 35 dbi Parabolic solid dish antenna in 65Km link and strangly my guys failed in that link. I know s...

If I am making a policy for RB411 and it can be opened only in telnet mode. Then how can make the policy in read only mode, because I can revert the policy in telnet mode and again it can be opened in winbox.

can you please help me in brand making? Ex: like the name of the radio is to be hidden and in top of the winbox, in place of mikrotik something else to be written. Can we somthing regarding this issue. Second in new terminal, if I want to replace mikrotik.com and want to write abc.com in place of t...

Can anyone help me in making my own build on mikrotik

can you please help me in brand making? Ex: like the name of the radio is to be hidden and in top of the winbox, in place of mikrotik something else to be written. Can we somthing regarding this issue. Second in new terminal, if I want to replace mikrotik.com and want to write abc.com in place of th...