Could you please send us the setup of the MK and your LAN to understand the scenario. (IP default gateway etc..)

HI, if your upstream is completely in use, I think that the best choice is Parent queues and the respective child queues, you can create a main queues with a 100Mbps, and then add child queues with the respective priority to your costumer. Depend of the setup of your network you can set this en your...

Sorry, I was using userman I instal userman-test4.11 and solved.

Hi,

The problem is I have a Hotspot in RO V4.11 it's working fine but I want that the users, use sign up free profile without payment. I see that this is posible but I don see where configure the profile customer.

HI,

Queues trees only work in one directional queue, parent generaly is global-in or global-out depend if download or upload.

take a look of this manual. it may help you

http://wiki.mikrotik.com/wiki/Manual:Queue

The route look fine and you do not need firewall rules because you specified that is routing. it's look like problem with the windows firewall or something like that. try Ping the PC's. and verify that the RDP is enable in the PC's. Another issue I see that your static route say 192.168.211.0 gatewa...

Hi I send a email with my UDID I would like to test that.

Me parece que el problema puede deberse a configuración en el ISA Server, el cual generalmente es un poco complicado. A nivel de routing no hay mas que hacer, el gateway del MK es el ISA server el cual hace de firewall y te lleva a internet, y ademas es el gateway del network 85.0/24 El gateway del ...

Mikrotik Setup: ip address add address=192.168.2.36 interface=ether1 ip address add address=192.168.85.1 interface=ether2 ip route add dst-address=0.0.0.0/0 gateway=192.168.2.1 Then configure the DHCP in the ether2 I prefer wimbox to do this. Then in the Isa Server you have to add a static route tha...

I have router with 4.10 and 4.11 running ospf and is working good, I think that the problem could be the RB1100 if you are using the ports (11-13).

This router have a lot o problems with this interfaces.

HI you have to do this step by step. 1) IP pool add name=pptp_pool1 range=xxx.xxx.xxx.xxx/24 2) Then enable pptp server (like this) interface pptp-server server print enabled: yes max-mtu: 1460 max-mru: 1460 mrru: disabled authentication: mschap1,mschap2 keepalive-timeout: 30 default-profile: defaul...

just block the port 80 management to the specific nanoloco's IP's. and create a white-list to the IP tha need manage the radios. ejemplo: IP firewall address-list add address=xxx.xxx.xxx.xxx. list=WEB-WL Accept chain=forward dst-address=xxx.xxx.xxx.xxx (nanolocosIP's) action=accept protocol=tcp dst-...

The big problem of the MPLS is the supported MTU of the device's. is very important taht the devices inside de mpls cloud supported jumbo-frames.

Yo have to create mangle

mark-packet and mark-connection of both interfaces.

after that just create queue tree to give priority and/or bandwith shapping.

example.

http://wiki.mikrotik.com/wiki/TransparentTrafficShaper

Just configure the vlan in the ether1 on both routers, and add a bridge and put the vlan85 and the ether2 (PC) in the bridge. interface vlan add name vlan85 vlan-id=85 interface=ether1 disable=no add bridge name=bridge85 (Trunking vlans-interface) interface bridge port add bridge=bridge85 interface=...

coul you please send a screenshot of the traceroute?

Many ISP use private IP in his network and when you try to trace this host show like reques time out.

Do you have your AS Number?

if not you have to ask for that on arin or afrinic. and then is only configuration yo have to speak with your ISP's and ask what kind of router are using they exchange yours AS number.

Very good manual to start: http://wiki.mikrotik.com/wiki/Manual:BGP_Case_Studies

No Gino, Es un paso de fibra y el MTU es de 1546, lo probe y no creo que sea esto.

The Interface 11, 12, 13 on RB1100 are the giga port. when one of this interface (11, 12, y 13) have nothing connect they get up a traffic that is ridiculous like 220 MB. and this issue was in the 4.8, 4.9 4.10 version. [admin@NOC] > interface ethernet monitor "ether12-> Spare" status: no-...

I have 2 router running mpls: 1 RB1100 Ver 4.10 and one RB1000 Ver 4.10, before a receive the rb1100 I was using a rb 450G and the mpls interface was setting in 1522 in both routers. I was working good. I change de router 450g by a rb1100, and the first problem was some web pages like banks or billi...

do you have this interface in a bridge? it so. go to queues -> simple queues add -> put the name -> go to advance in interface put the bridge or the ether5, if the port 5 if not in a bridge and assign the Bandwith what you want.

Regards,

I have a router (Power Edge 732) running MPLS in 4 Vlan interfaces. it was working great but a few days ago when I add the #4 LDP Interface to the MPLS Cloud, the router start to rebooting constantly (The router was rebooted without a proper shutdown) I change the router for other same (PE 732) and ...

HI,

First, if you want use routing-mark you need to create IP Firewal mangle action mark-connection to mark the connection that yo want to use one or another wan link.

I think that this link can be usefull

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways