MikroTik

MrIC

One is 18 Volts and the other is 24Volts, as for which one to use, it depends on your load, if it is just a bare board and short cables it won't matter which one your using. But with longer POE cable runs it's better using the higher voltage due to loss. Also, if your using lots of cards use the hi...

MrIC

hello there
i want to ask
what is the difference between those :
http://routerboard.com/18POW
http://routerboard.com/24HPOW

and what is the best one for
RB433AH + XR2
and
RB433AH + XR2 ( 2 Cards )

MrIC

any help ??

MrIC

hello there i have 2 adsl lines and using PCC to load balance them i need to mark routing an Extension to make that Extension works only from one line this is my config : /ip firewall layer7-protocol add comment="" name="Extension \" .exe \"" regexp="\\.(exe)"...

MrIC

there is now wireless signal to connect

MrIC

i have routerboard 433AH + XR2
there is a problem

wireless interface always disabled in bride port even that it enabled
can anyone help me pls ?

MrIC

can you help me with this ?
i tried pcq but it don't understand how it works
all i need to limit every user with 1mb also 512kb
clients ip 192.168.88.1/23
thanks in advance

MrIC

have router board 750G using it to load balance 4 lines with PCC Method
i need to limit all my users , every one with 1mb speed
i don't use hotspot , dhcp
i tried to add simple queue but after 253 simple queue router Freeze and i can't add others
so what i have to do ?

MrIC

i want to block + redirect sites using firewall ( layer7protocol ) i blocked them but i can't redirect them this is my config to block /ip firewall layer7-protocol add comment="" name="Porn Sites" regexp=porn|tube8 /ip firewall filter add action=drop chain=forward comment="&...

MrIC

Search the forums, this has been answered several times in the past. You also have to use PCC on the output chain as the proxy doesn't get caught by the wiki example.

ok can u help mr with link?
i searched and found some topics but not working too

MrIC

hello i have RB 750G also i have 4 lines each one 2mb i'm using the routerboard to load balance those 4 lines i tried to active web proxy but when i did that i got only one line works so i need help to active 4lines with PCC method + web proxy can some one help me with this ? this is my config "...

MrIC

Not without a network diagram.

what do you mean with network diagram ?
you mean RB750g Config ?
or ISA Config ?
or what ?

MrIC

i have rb750g using it to load balance with PCC
then it connects to ISA server
there is internet on ISA and also clients
but i can't ping to RB ip " 10.5.50.1" also can't open winbox after ISA

can someone help me with this ?

MrIC

i need script to open adver in 5 times
i mean in 12pm adver open & 03PM & 05PM & 07PM & 04AM

so is there way to do that ?

MrIC

thank u i used netinstall and everything works fine

MrIC

but i think that netinstall will remove the old key and i will need a new key , is that right ?
" sorry but i didn't used netinstall before "

MrIC

hello there i just got new routerboard 750g it was have routeros ver 3.31 so i tried to update it to 4.6 i downloaded the file from mikrotik website then i uploaded it to files and restarted the routerboaed then i can't get dhcp ip and can't login into routerboard with mac or ip " winbox can't ...

MrIC

i have to lines with load balance PCC but there is problem that hot spot doesn't redirect automatic , i have to write 10.5.50.1 in my browser to login . my config : / ip address add address=10.5.50.1/24 network=10.5.50.0 broadcast=10.5.50.255 interface=Local add address=192.168.1.5/24 network=192.16...

MrIC

Still waiting replay

MrIC

another problem
when i actived hotspot and made " hotspot=auth" i got only one line working
i tried to change auth to " From clients , http , local dst , to clients "
all the same
so is there anything wrong i did ?
or there is some settings i missed ?

help pls

MrIC

There are many antennas and many routerboards that will work. You really need to hire a wireless consultant to help. You have too many questions and a project of very large scope. Here is a list. http://www.mikrotik.com/consultants.html Tom thanks tom but i'm from egypt and there no one to hire :( ...

MrIC

i'm making new wireless network it provide 5 towns with internet ( only one of them have internet ) like this : http://i.imagehost.org/0120/10-24-2009_7-36-20_PM.png the thing is i need help about best router boards and wifi cards also antennas . in this case how can i control all clients from tower...

MrIC

thank u fewi
i will test it then i will replay again .

MrIC

i have to lines with load balance PCC but there is problem that hot spot doesn't redirect automatic , i have to write 10.5.50.1 in my browser to login . my config : / ip address add address=10.5.50.1/24 network=10.5.50.0 broadcast=10.5.50.255 interface=Local add address=192.168.1.5/24 network=192.16...

MrIC

ok thank u.
i think that i have to use rb433 as wired & wireless .

MrIC

thanks mate . it's my wrong .
i will try .

MrIC

i'm trying to load balance for 3 lines using PCC this is my config / ip address add address=192.168.100.1/24 network=192.168.100.0 broadcast=192.168.100.255 interface=Local add address=192.168.0.5/24 network=192.168.0.0 broadcast=192.168.0.255 interface=WAN1 add address=192.168.1.5/24 network=192.16...

MrIC

Hi Guys
this is my network

in Mikrotik i can limit P2P programs
but in squid i can't .

so is there someone knows away to limit P2P programs in squid ?
Thanks .

MrIC

there is wrong in PCC Wiki in those rules add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=src-address,dst-address:2/0 \ action=mark-connection new-connection-mark=wlan1_conn passthrough=yes add chain=prerouting dst-address-type=!local in-interface=Local per-...

MrIC

i think that is normal .
mine too have this dhcp debug

MrIC

4) the reports are not generated at all . History 0 :( Seems like this is not an SMTP error, but report generation script issue. What do you see in files /home/proxylizer/proxylizercrontab and /var/log/proxylizer/mail_send_log.log? /home/proxylizer/proxylizercrontab http://g.imagehost.org/0510/1_60...

MrIC

so can someone answer me ? or i simply delete vmware image and forget proxylizer ? 1) Daily reports are sent on the next day. If you have created reports on 14.05.200., they will be sent 15.05.2009. Check, if you still have not received anything today after 16:00. 2) I'm not sure about Google's SMT...

MrIC

so can someone answer me ?
or i simply delete vmware image and forget proxylizer ?

MrIC

Use the Scan and Snooper tools to find out which band is less used in your area, and use it to avoid interference.

i'm not talking about channel .
i mean band : 2.4b , 2.4b/g , 2.4g .
now i'm using 2.4b ( But connection is only 11mb and i need more )
so is there better band ?

MrIC

some help here pls i downloaded the new image . web interface opened and i configed it this is my config : http://g.imagehost.org/0427/config.png add bsd-syslog=no name=sendToProxylizer remote=172.16.1.49:514 src-address=0.0.0.0 syslog-facility=daemon syslog-severity=auto target=remote add action=se...

MrIC

what is the best Band to use ( RB433 with XR2 ) as ap bridge ?.

MrIC

change max-cache-size: none no max-cache-size: unlimited

Added: but you cannot use Nth to load-balance transparent proxy. use ECMP for Web-Proxy or wait for PCC...

i think it works now
and will test it if there is prob i will disable proxy and wait for PCC
thanks

MrIC

as I can see by 'Sent To Client', proxy is working. but is not caching =) did you enabled web cache at all? yes settings : enabled: yes src-address: 0.0.0.0 port: 8080 parent-proxy: 0.0.0.0 parent-proxy-port: 0 cache-administrator: "master" max-cache-size: none cache-on-disk: yes max-clie...

MrIC

so ur using nth i tried to use it but it didn't works fine . all connections used only 1 wan . so is there any changes u did to make NTH works fine ? and if there is changed can u share it with us pls ? actually, it was not Nth, it was my own setup developed from scratch. it worked fine while we us...

MrIC

no, sorry, I'm RouterOS fan =) and I used only 'Nth' (it was 'Random' really =) ), no ECMP so ur using nth i tried to use it but it didn't works fine . all connections used only 1 wan . so is there any changes u did to make NTH works fine ? and if there is changed can u share it with us pls ? anoth...

MrIC

help pls

MrIC

any replay ?

MrIC

Hi i have load balance between 2 wan ( ECMP Load Balance ) when i tried to active http proxy it didn't work ( Browsing stopped ) this was my redirect rule : ip firewall nat add action=redirect chain=dstnat comment="cache redirect rule" disabled=no \ dst-port=80 protocol=tcp to-ports=8080 t...

MrIC

i have 2 wans and i'm using ECMP to load balance betwen them but this way has some probs so messengers dissconect and reconect every 10-30 min . i tried to mark routing both of yahoo & hotmail to use 1 wan this is my config : /ip firewall mangle add action=mark-routing chain=prerouting comment=&...

MrIC

MrIC

same problem in 3.23 :( messenger dissconnect every 30 min i tried to routing mark msn & yahoo messenger but the same prob too this is my rules /ip firewall mangle add action=mark-routing chain=prerouting comment="Y! routing mark" disabled=\ no dst-port=5050 new-routing-mark=Yahoo pass...

MrIC

3.23 arrived
http://www.mikrotik.com/download.html
so ECMP bug fixed or not ?

MrIC

mate in this case my ip supoe to use wan2 .
but i'm using wan1 and other clients also using wan1 so where is the balance ?

what about other prob ?

MrIC

just google

all_packages-x86-3.10.zip
or all_packages-mipsbe-3.10.zip if you have a routerboard.

The ECMP problem still exist but there is a slight improvement.

ok thanks
i will test 3.17 i think that it will doing great , i will back with result

MrIC

@ GuJack20
can u pls upload MTv3.10 to test it with u ?
i can't found it

MrIC

Hello evey one .. i have some probs with load balance ( NTH ) the prob is that balance doesn't work :see the pic: http://g.imagehost.org/0507/what_is_going_on.png as u can see in this case i have ip 192.168.100.5 and i'm using wan2 as my internet .. but it's work this is my config /ip firewall mangl...

MrIC

yes. with the only difference - Nth works with active users, http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways works with static groups of users

another thing pls .
what is the best way of them that i can active hotspot and proxy with it ?

MrIC

ECMP binds 'src-address+dst-address' to gateway. 'Nth' scenario binds a user to gateway, so one user cannot use both uplins during one session. nothing wrong - it's by design. but if you have many users - you will have balance

so NTH same as Load Balancing over Multiple Gateways right ?

MrIC

Hello there i have to gateways and i tried to load balance them at firest i tried ECMP load balancing with masquerade i got the two lines speed http://f.imagehost.org/0463/Speed.png but i got connection interruptions every 5~10 min so i tried to find why . i found this topic ECMP so i tried the othe...

MrIC

http://wiki.mikrotik.com/wiki/How_to_Bl ... sing_Proxy

i'm talking about not caching . this way will stop download files .exe , .msi ..etc

i need the way to stop this files from caching . and how to make max size of cached files .

MrIC

hello there ..
i want to To disallow download of .EXE and .MSI ..etc
and also i want to make max-object-size .

i can do it in old mikrotik ver 2.xx
but i didn't find how to do it in mikrotik ver 3.xx

so can someone tell me how to do it on ver 3.xx ?

thanks .

MrIC

Get a different AP for clients. I've seen cases where certain APs will 'NAT' MAC addresses, only showing the MAC of the AP, and not the MAC of the devices behind the AP, even though it's supposed to be in a bridge...

There's not much you can do about this

so what i the best AP to do this ?

MrIC

Hi there .. i have mikrotik RB 433 with routeros 3.17 on it . i'm using it to share internet with Clients . so i have mikrotik routeros x86 v3.20 to control my network . the problem is when i try to get Clients mac address i only see APs mac http://g.imagehost.org/0345/1_5.png so i can't get there m...

MrIC

Have you installed routerboard package ?

yes .

MrIC

i got the same problem here when i updated my 433 routerboard to 3.20

but i downgraded it again to 3.18 and it works fine now ..
by the way try to find 3.17 it's better i tried to find it but i couldn't

MrIC

u mean this ?

change brust time as u want 120 will be 60

if u want to make it dynamic then add this in hotspot profile - limite

96k/256k 96k/2048k 96k/256k 120/120

if u want it static so u have to write ir for every user

MrIC

Hello ..
i just installed routeros v.3.20 ( intel/amd ) and then i got level 4 license .
but after i added the key i founf that i can't restart or shut down the system .

so what i have to do ?

MrIC

Looks like you need to contact TP Link support - this isn't a Mikrotik problem.

but why i can't connect in others modes ?
i tested TP link and airlive Both of them can't connect in bridge and client with wds ?

MrIC

Maybe your users are spoofing their MAC addresses? no cos i tested it with my own pc and laptop and both of them got access point mac look this is my settings : http://a.imagehost.org/0233/1_3.png http://a.imagehost.org/0200/2_2.png http://a.imagehost.org/0106/3_3.png http://a.imagehost.org/0905/4_...

MrIC

no ...
and i can't connect in bridge mode

MrIC

hi to all i have RB433 and XR2 mode ap bridge the problem is : i connect 5 ~ 7 Clients through 1 access point and i'm using hotspot in hotspot i see only mac address of the access point for all clients http://a.imagehost.org/0348/mac.png so i can't control them ( any one can log in with any pass and...

Search found 66 matches