Disable , untick "Authenticate" on Btest Server Settings, and it will work, after you enable it , it stops working.

After long reasearch and testing, there seems to be problem with DMA radismanager software, problem patched in radiusmanager-4.1-cumulative_patch.tgz, and now it fully works. Yes i know it's old thread.

second part of post is solution to my problem

http://forum.mikrotik.com/viewtopic.php?f=9&t=58304

end of script has problem and wont set ipv6 default route so i removed lines that remove default gw and set gateway, as it seems that parametar never changes on HE tunnel and should remain static

i do not have enough knowledge to solve this problem is to get ip address of interface and set it as paramter to another interface :global int "ether1" :global intip [ /ip address get [/ip address find interface=$int] address ] :log info ($intip) and i need to pass $intip as local-address ...

Esxi cannot be integrated as part of RouterOS. It is known that free version of Esxi is working ok with RouterOS. been there done that (in my case keeping entire lower end server was to much power hungry), and i don't know who made centos image for Xen but there is and error made as module alias fo...

on x86, install 5.8 (or latest :) ) and try to see if you still have a problem. Then send supout.rif XEN problems will not be fixed ever. VmWare Esxi would be best but i tried to be cost efective since i have only need to keep freeradius and mysql services and that is more than enough for xen hyper...

i tried using and still trying to use it. u should try setting memory something like 16MiB or something less untill u see status: running, i have 768MiB RAM for host mikrotik 3.30 and unable to use more than 43MiB for CentOS 5.1 image, it just seems to limit memory usage on something else other tha...

i tried using and still trying to use it. u should try setting memory something like 16MiB or something less untill u see status: running, i have 768MiB RAM for host mikrotik 3.30 and unable to use more than 43MiB for CentOS 5.1 image, it just seems to limit memory usage on something else other than...

i was wondering could we use filters in pppoe profiles to exclude trafic toward some ip (local servers) when i say exclude traffic i mean like no simple queue nor counting amount of traffic toward that excluded ip.

Thanks,
and sorry for lack of sense and professional dictionary

MikroTik proxy does not have too much parameters, as squid offers you.
The best version is the latest MikroTik RouterOS 4.10 for the proxy.

i'll upgrade it to that version and post results at least my opinion not hardcore statistic data
thanks for reply

my bad, it seems that broadcast only accepts messages from ntp server, while unicast sends request to check time. No matter which mode u use it should work.

it's easier to find another girlfriend

i used putty on phone

here is list of all RoS

http://www.thavinci.za.net/Downloads/RO ... /download/

Which Mikrotik RoS has like the best web proxy service. i used squid for proxy server but there like bilion parameter to tune and from time to i get sick of reading evry line of squid conf. So i ask you which ROS to use for like 50 clients, i would like faster page loading instead of bandwith saving...

i used for primary ntp server time.windows.com and perhaps u could change mode from unicast to broadcast

u could use Comodo secure dns it's free as secundary dns, or if u are ISP u might wana Bind9 as DNS and multiple forwarders

use nstreme if u use Mikrotik OS , it's pretty much easier, Nstreme calculate act timeout on it's own.

there is [admin@instaler] > queue tree pr Flags: X - disabled, I - invalid 0 name="downstream" parent=lan packet-mark=test-down limit-at=32000 queue=default priority=8 max-limit=32000 burst-limit=0 burst-threshold=0 burst-time=0s 1 name="upstream" parent=global-in packet-mark=tes...

Hi all. We use WLM54AG-20 radio. We tend to link the radio enclosure with antenna using a coax cable LMR400 for 1meter max to avoid too signal loss. But sometime is not easy to install the radio so close to the antenna (maybe in summer yes, but in winter....). What happen if I use a more powerful r...

Start by verifying IP connectivity. Ping the user manager router from the RADIUS client. Use Torch on the target to check that the external IP is what you're expecting it to be. Then check secrets again. Then check the firewall on the server to make sure you're permiting RADIUS inbound. i manage to...

is there any aplication that does Simple Queue on linux , distro Ubuntu

altq
shaper
(pf - only on bsd)

all of they control bandwith per interface but none on by ip

thanks man, u are a gentle man. i need you to help me set up queue for hotspot users. i have a client who claims to be using 1pc but i later discovered dat he has about 6pcs in his office all connected to interenet. i want to setup a limit for him at least create d queue so dat i can limit him. aga...

these forum was very helpfull, all i get here was , if u can't do it your self , why bother someone else

i have setup like this remote AP + HOTSPOT connected over l2tp tunnel to my local box on which i run USERMANAGER , and problem is that Usermanager only works in localhost (tested using pppoe and hotspotuser ) but form remote box when i add to radius client my usermanager ip + secret (added that rout...

dish would be great but u might wanna use Nstreme dual as best possible solution. U might need 4 parablic grid antena 29db but i should work as it uses nstreme dual. p2p for that lenght u need parablic antena u might hear that grid do it's job but for me dish is far more better and i say again if u ...

have u tried to bridge them and add routes place one ap i ap-bridge mode and the other in station wds mode to be able to bridge them and simpe as it is add dhcp-server on ap-bridge (bridge all intefaces on both MK and than add ip to bridge and then add dhcp-server to ap that has ap-bridge and dhcp-c...

do u understand that hotpot creates it's own firewall and it can only be avodied if u set ip bonding to that mac and set it be bypassed and then your public pool can give public ip to that user. if u done ip address assignemnt to corresponig interface and added gateway that u should have zero proble...

Basic rates are the one that device must be able to use on current tx/rx signal else it won't be able associate, supported rates on the other hand are speed rates that can be used to communicate as i was told , keep basic rates on b mode 1mb and a/g to 6mb and supportes as you think is needed.