Because of complain from hotspot customers we did look into the log this an maybe i found the cause. Your idle timeout for the hotspot users is very long. We had an idle timeout of 1 hour and also a 1 hr lease time for the DHCP client. When user is idle for a long time he is not removed from the hot...

On a hotspot with trial user login there are no dynamic users under ip>hotspot>users only under active are the trail users. in 5.x a dynamic user is made in the ip>hotspot>users. Bug in 6.27?. This is the HTML code we use. <form name="trial" action="$(link-login-only)?dst=$(link-orig-...

Try to limit the number of login attempt per time on a system from a single IP address. The dst-limit rule only limits the number of simultaneous connections not to connection per time /ip firewall filter add action=return chain=ssh comment="Accept 1/min connections" dst-limit=1/1m,0,src-a...

b) now I noticed when setting the "keepalive-timeout" on the client to same value the connection starts reconnecting every "keepalive-timeout" x 2, so setting the keepalive timeout to 10 for example it starts to reconnect every 20 seconds Same problem here with one connection. 3...

I still have a strange problem with counting hotspot users over time. Made a script called hotspotcounter /system script add name=hotspotcounter policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \ source=":global counter\r\ \n:set counter (\$counter + 1)\r\ \n:log i...

Is it possible to have the dude that is installed on a routeros machine to execute something based on a notification ? I know that it is possible to execute on server when dude is installed on a windows machine. We would like to execute a Routeros command on the Dude server machine based on a notifi...

I use this function in dude to monitor the number of firewall connections on a hotspot. ros_command("ip firewall connection print count-only") With the upgrade from ros 4 to ros 5 i do see that there is more coming back then only numbers. Behind the number there are two extra characters. (...

For a hotspot user we can set some limits in the profiles. This page about different limits and different traffic priorities of the wiki site gives a good overview of the different options. The minimum rate should be the data rate that is guaranteed to a target On the wiki page about Queue under HTB...

Thanks for this interesting information. Do you have any information regarding the response timing ?. I presume this will be lower on the dual N-stream connection. Would like to know how big the difference would be. Could you tell what type of bonding you have been using ?. I have been playing a bit...

Reply from mikrotiksupport: 1) Are there routerboards that does support this type of bonding ?. None of RouterBoards support alb and tlb 2) Is it possible to do this type of bonding with EOIP tunnel ?. You can't use it on EoIP . 3) Do you have any information of hardware that does have diver support...

Reply from mikrotiksupport:

Driver support is required for tbl/alb to work properly. These modes are not
supported by interface drivers of that board. Use any other mode on that
RouterBoard.

I am trying make a bonding balance alb with 2 routerboard 433 3.20 routeros Setup is very simple. 2 ethernet ports ( eth2 and eth3) connected with cross over cables. Eth1 is input and output. http://img5.imageshack.us/img5/989/clipboard01xp3.jpg Because in the final project I will be using 2 ADSL li...