after the update to 6.45beta19 the wireless interface can no longer be found. Model: SXT HG5 ac ROS Update, reboot Wireless interface disappeared Routerboot update, reboot Wireless interface disappeared reboot Wireless interface disappeared Log: DefConf gen: Unable to find Wireless interface(s) I wi...

thanks for all the answers...

ipv6 is definitely disabled.
hoped that there is a way to halt the system at boot und push a recovery firmware to it
and configure it as a new device.

I will go up and push the Button.

tried that already local over ethernet and remote over the wireless link.

But the Filter does what he does - he drops at position 3 ALL incoming packages.

I want to hard reset the Board but first finding a way to do that without climbing to the Antenna.

Hey, i foolishly added a filter rule to my bridge and that is preventing access to RouterOS. What i did. Quick Config PtP CPE. After running for a while, i added two forward rules for pppoe-session, pppoe-discovery to the bridge filter. Everything fine so far... Then i follishly added a drop everyth...

I found the Problem. If you update from 2.9.x to 3.11 and want to use the old config, you have the Problems above. Also Packet Sniffer didnt worked and i made the decision to make the whole config from scratch. After that everything worked. Packet Sniffer, As PPPoE Interface the eoip Tunnel instead ...

ok, but mine Problem is another... With 2.x RouterOS the Interfaces that are down because nothing is plugged in can still used for PPPoE in a bridge. In RouterOS 3.x is a change that interfaces that are (unplugged-)down cannot used as PPPoE interface in a bridge (because they are down). Using the eo...

no one?

no one did the same scenario??

thx.

Hi, i'm connected via Wireless and use a eoip Tunnel to a Radius Server. I used RouterOS 2.9.51 and the PPPoE Client on a unused ethernet interface. The ethernet with the PPPoE on it is in a bridge which included the eoip-tunnel. the PPPoE works in 2.9.51 with an interface that is down, but after up...

it seems that it not works.

I want to block all access from private IP's over the AP.
I can ping from one client to another and show/use the Network
Share. Bad is that the WLAN speed goes down and the pppoe login fails very often.

Hey, i have little Prob with our town lan. I use 11 MT's and make PPPoE with our Radius Server. The clients logging in with an Linksys Router in Client Bridge and make a PPPoE over Windows. Now the Problem that i have is that user that have Shares on the home-lan can see other peoble on the same AP ...