MikroTik

aslu

I have installed mikrotik on HP Server With 4 Network cards. Ether1 is connected to Internet and ether2 as PPPOE. All connections are using live IP and no nating. Most of the customers are using our connection for CCTV camera. One customer have 2 connections. One in shop another one in Home. He is a...

aslu

Hi,
I have an ISP. I'm looking for a solution to byepass local traffic count from FUP for PPPOE clients. Most of the customers having CCTV camera and if they access it from another account, camera bandwidth is eating the FUP quota. Is there any solution for this?

Thanks & Regards,

Aslam

aslu

i can see there is lot of disconnection is happening there. attached is the screen shot of logs.

aslu

If you want, i can give you the access to the SXT. provide me your email, i can send you the details,

Aslam

aslu

Hi,

yes, SXT is loosing connection. i put the reboot script after every 6 hours.

End user have enough signal. but speed is very slow and disconnecting every 3 miuntes.

Regards,

Aslam

aslu

Hi, I have a network of 15 sector antennas providing wifi connectivity in a remote area. Im using all mikrotik equipments. the network is split to 5 sections. total coverage are is 500 X 500 All the sections are connected with Omnitik and SXT. Sector antenna (20db) connected with R52HN and RB433. Th...

aslu

Your scenario is possible.

do you enable nat on it?

aslu

Hi, I would like to build a hotspot network in remote are using mikrotik. The are consists of 500 x 500 meter. Concurrent users will be 500. There are porta cabin homes are there. Planning to put 20db 120degree sector antenna in the height of 6 meter (all the porta cabins are at the height of 3M) wi...

aslu

i am experiencing continuous disconnectivity from mikrotik eventhough it is powered on

aslu

Thanks for the reply. As i mentioned, its a housing compound. 6 sector antennas will be installed on the compound wall. All the users will access via hotspot. with 6 sector antenna, i will place six independent wireless as mesh. Is this 6 can accomodate all the 300 simultanious users? Regards, Aslam

aslu

Hi,

I need an expert opinion for my upcoming project.

A residential compound consists of 600 range. Total population is 2000. expected 50% will be subscribed for wirless internet.

expected simulatnious user between 200 to 300.

So, how many wireless i have to place?

Please help me.

Aslam

aslu

Hi,

Reset the current configuration. Once it is started, use the option remove config (don't keep any default config)

Configure the ether1 as pppoe dialler interface. better don't put any ip.
configure ether 2 as your local lan.
Do the nating in ip firewall.

Regards,

Aslam

aslu

thanks for the reply.

I can't login to os because it is rebooting. secondly there is no capacitor 6v470.

Regards,

Aslam

aslu

Hi,

I have RB 433AH with version 5.5. It is restarting always without giving any error. Sometimes, it is taking too much time to boot at this point

Press any key within 2 seconds to enter setup..
loading kernel from nand... OK
setting up elf image... OK
jumping to kernel code

Regards,

Aslam

aslu

Hi all,

In my RB493Ah, it seems the throughput is very less in bridge mode. does anybody face the same problem like this?

Aslam

aslu

Via DSL or ethernet?

Aslam

aslu

Thanks brother. let me try.

Aslam

aslu

Hi all,
Please somebody can help me to block sip in MT!!!!

I use this command "chain=forward action=drop protocol=tcp port=5060" but still some users are making calls.

Please help me...

Aslam

aslu

Hi,

I'm facing problem in my RB433AH MT. If i work in my winbox, it will stop respongding for long time. by this time if i try to close that, it will not close. after a while, it will close.

I'm using this as bandwidth shaper and failover.

Regards,

Aslam

aslu

I found the solution. It is very simple. I use Netwatch to ping a IP and put the static route for the this IP via DSL. Added one more Netwatch with different ip and put the static route for the IP via V-sat. Whenver the IP is not reachable, it will disable the corresponding default route. Regards, A...

aslu

Does anybody made script working with 4.11? or else i have to giveup the idea for the scripting.

Aslam

aslu

Hi, See the errors i'm getting, admin@MikroTik] /system script> add name="ecmp-startup" source=":if \(\[/ping 82.205.224.9 count=1\]=1 && \ syntax error (line 1 column 40) [admin@MikroTik] /system script> \[/ping 82.205.224.1 count=1\]=1 && \[/ip route get \[find \ exp...

aslu

Applogize my illiterate.

In all the documents, it is not clear where the scripts has to apply.
Is it possible via Winbox?
It it is on CLI, do i can type directly? or type in notepad and put it in the file?

Regards,

Aslam

aslu

Can somebody help me how to do the scripting for this scenario!!! I'm tried some scripting http://wiki.mikrotik.com/wiki/ECMP_Failover_Script but no sucess. There is lot of errors My MT version is 4.11 and most of the scripting tutorials are based on 3.XX BTW there is no good scripting tutorials for...

aslu

Hi,

Could you please explain me, where do i can configure the ip to ping.

Aslam

aslu

Its not clear for me.

What i did is, my gateway im MT for the dsl is 192.168.1.1 and put the option check gateway to ping. Is it right?

Regards,

Aslam

aslu

Hi, I have 3 mode of connections. 1) DSL 20 Mb 2) Wimax 2 Mb 3) V-sat 2 Mb I need to use Loadbalancing and failover. The problem i have is, dsl modem ip is 192.168.1.1. If the dsl isdown, the gateway ip is reachable and it will not do the failover. Any body know how to solve this? Regards, Aslam

aslu

Hi,

I have to use montly billing for pppoe users. Is it possible thru usermanager? if so, how it possible.

Regards,

Aslam

aslu

Hi, I have a DSL network. I would like to add IPTV on It. All the users are connected to MT via PPPOE abd bandwidth control as well. Pleae somebody can help me to configure IPTV in network without bandwidth restriction(only for IPTV). where do i have to put IPTV before MT or connect to MT via pppoe?...

aslu

Hi,

I created EOIP over pptp as per http://www.butchevans.com/readarticle.php?article_id=19
Both MT connected and i'm getting dhcp lease from other end but no browsing. anybody have same issues like this?

Regards,

Aslam

aslu

It is working. many thanks..

aslu

Hi All,

Anybody tried Traffic shaping in bridge node?

If yes, please give me an idea how will it configure..

Regards,

Aslam

aslu

It is working ... thanks

aslu

Dear Costas, Do you have to treat wlan1, wlan3 and eth1 are three different networks? if no, best choise make a bridge. Or, Make ether1 has your outgoing interface and do nating (for browsing). this way wlan1 and wlan3 can access the ether1 network. assuming your ether1 is connected to a router. mak...

aslu

Hi all,

Anybody have the idea how to upload openvpn clent certificate to MT router?

Regards,

Aslam

aslu

Hi, I configured my MT's wan connection as pptp client. it is connected. but, whenever i'm trying to connect, it is disconnecting. on the pptp server i have the following error. "Apr 13 13:26:58 mx pppd[7409]: CCP terminated by peer (No compression negotiated ) Apr 13 13:26:58 mx pppd[7409]: Co...

Search found 36 matches

Re: Exclude local network traffic from PPPoe bandwidth quota

Exclude local network traffic from PPPoe bandwidth quota

Re: Wifi hotspot issues

Re: Wifi hotspot issues

Re: Wifi hotspot issues

Wifi hotspot issues

Re: General port-forwarding and routing case

Wifi Covering 1square km

connectivity

Re: Maximum Clients support

Maximum Clients support

Re: New to RB, can't get pppoe-client working

Re: RB 433AH is restarting always

RB 433AH is restarting always

Less throughput in bridgemode

Re: PPPoE disconnecting every 8 to 10 mins RB750

Re: Block SIP

Block SIP

RB 433 Winbox is not reponding

Re: Load Balancing with 3 wan

Re: Load Balancing with 3 wan

Re: Load Balancing with 3 wan

Re: Load Balancing with 3 wan

Re: Load Balancing with 3 wan

Re: Load Balancing with 3 wan

Re: Load Balancing with 3 wan

Load Balancing with 3 wan

PPPOE with monthly billing

Bandwidth Shaping in pppoe

EOIP over pptp no browsing

Re: Traffic Shaping in bridege mode

Traffic Shaping in bridege mode

Re: PPTP Clent is getting disconnected

Re: Help on Routing

openvpn client

PPTP Clent is getting disconnected