MikroTik

andret

It seems to be working intermittently - I guess there are some conditions which need to be met when a lease is renewed?

andret

So this was quite simple... On mikrotik created new script named 'dhcp_lease_script' with the following content :global leaseBound :global leaseServerName :global leaseActMAC :global leaseActIP /tool fetch url="http://192.168.42.1/dhcp.php?bound=$leaseBound&mac=$leaseActMAC&ip=$leaseAct...

andret

Doesn't seem too difficult. All the information about DHCP lease-scripting is here: https://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server
You just need to write/test it using a "tool fetch" command.

Thanks... I somehow read right over the 'lease-script' section... can't believe it

andret

Hi Does anyone have any ideas on how to implement a web call at the time a DHCP IP address is allocated? For example, I might have a device configured on a static IP reservation so when it connects to the network it will always get this specific IP address. I want to know when the device connects/di...

andret

There seems to be something wrong with virtual disk in OVA. I normally download CHR in "raw disk image" format and then I convert it to vmdk myself. I don't exactly remember why, either there wasn't vmdk at the beginning at all, or there was some problem just uploading it to ESXi as bare ...

andret

Send a bug report to support. They may see it here, but officially it's only user forum, so they can miss it. Thanks, just did that :) This has been solved with help from support to re-read the information here https://wiki.mikrotik.com/wiki/Manual:CHR_VMWare_installation I somehow missed that one ...

andret

Send a bug report to support. They may see it here, but officially it's only user forum, so they can miss it.

Thanks, just did that

andret

You need to resize the disk before powering on the VM for the first time.

It should automatically resize on the first boot.

Thanks, I thought of this also but tried it again just to make sure - the same result...

andret

Hi, I installed Mikrotik CHR from ova file downloaded from Mikrotik's website. It seems to run perfectly fine until I want to change the disk size. From the console it says 'resizing disk' and then I get the attached image as an error in a continuous boot loop - any ideas? Edit: I tried it on Virtua...

andret

From South Africa using Vodacom.

It just says "Status: resetting link..."

andret

Tried a different card reader?

I had this problem when I occidentally loaded xen package on a RB230 and netinstall couldn't read the card properly... after changing card reader everything worked fine.

andret

Hi

Is anyone using this device with any success?

MT detects it and creates a ppp connection for it but I cant get it to connect to anything - How should the channels be configured?

Thanks

andret

You understand, me xbox dont know your ip adres, that is why xbox do the handshake and why all traffic must go through international because live got my international ip not local. Then i play with somebody with normal setup with 1 wan ip i sent an invite to live and he except it and i see how the t...

andret

I've never seen a Xbox before which is why I'm asking but I'm assuming that the game is at least connecting to some or the other service where a list of games is published ?

andret

When you join a game, how does Xbox know which IP to connect to?

andret

I'm guessing the problem is related to the fact that when you host games your game will be listed on the index server using the ip address from which you connected (i.e. your intl) - when someone tries to connect they connect to the ip provided by the index/game server and when your xbox tries to re...

andret

I would mark packets from the Xbox and force them out on the international connection. Then do port forwarding only on the international connection. Your Xbox will be visible on the international ip and all data to and from it will flow via that account irrespective the destination IP being local or...

andret

Hi

Solution is to not use web proxy on MT but install transparent squid proxy which can already handle siblings.

Regards,
Andre Thomas

andret

can support be added in future version? Thanks

andret

I mean the configuration of sibling proxy which is willing to serve content it has on cache to another proxy server.

Currently MT 3.28 seems only to support parent or upstream proxy servers and not siblings/neighbors ? Or is there another way of achieving this....

andret

Hi

Is it possible to configure the web proxy to use neighbors ?

Thanks

andret

Hi

Which port speed is valid for USB 3G/HSDPA adaptors?

Mine is complaining about the port speed if I use anything other than 9600?

andret

So a cheap old AR5005G/AR2413A wireless card should do the trick for messing around?

andret

Hi

Anyone using BCM43xx based wireless cards with Mikrotik?

andret

Hi

Is there somewhere where i can get a list of mini pci wireless cards which are supported?

I know there are some listed on http://wiki.mikrotik.com/wiki/Supported_Hardware but its not nearly all of them.

Thanks

andret

Hi When I refer to the wiki I mean this page: http://wiki.mikrotik.com/wiki/Routing_local_%2B_international_%2B_unshaped_traffic_through_3_separate_adsl_accounts It makes provision for three seperate accounts but you just ignore the third one. Seperate the physical network of your two adsl routers (...

andret

I did the following:

1. Configure as per the wiki
2. Connect ADSL #1 into ether1 and ADSL #2 into ether2
3. Configure pppoe-out2 (the local one) to connect using ether2

No need to mark packets because the static routing takes care of the split.

andret

Excellent - Thanks!

andret

Hi

Is it possible to determine the hour of day and day of week within a script and execute a command in the event of a specific criteria?

Thanks

andret

Most definately a bug of some sort...

Does the same on RB230 and RB433 - Even in MT3.24 pre-release!

andret

I just installed a new MT 3.23 x86 within a virtual pc (using Microsoft Virtual PC 2007) and configured pppoe client and it connected perfectly. The fact that its working on the host OS should imply that you would be able to use it from within Virtual PC provided you've shared the correct network ad...

andret

You can try this to force mss to 1440 for example: /ip firewall mangle add action=change-mss chain=forward comment="" disabled=no in-interface=pppoe-out1 new-mss=1440 protocol=tcp tcp-flags=syn tcp-mss=1441-65535 Also ensure that you dont have a conflicting rule popping up as a result of a...

andret

Hi, I installed MT on VirtualBox (finally ) , but PPPoE connection wont work .

I installed ethernet card WAN interface for MT, but PPPoE client cannot establish connection.

Is there a way to make this work?

Did you share the correct network card to the virtual pc ?

andret

Hi I've noticed there's a possible minor bug on MRU setting for PPPOE connections. I create a new PPPOE connection and force MTU and MRU to 1480 - This is necessary as the maximums for the WiMAX connection over which the PPPOE's connect. Once connected, if I go to the Status tab the software is repo...

andret

I mean - look in the SDK PDF file, there is all you wanted to know about GPIO. From RouterOS you can't do anything with it.

Right - no way of compiling a binary, uploading it to the CF card and running/executing it from RouterOS?

andret

Hi Did you manage to get GPIO working under MikroTik? I have a RB230 which also has GPIO's but cannot find any method of implementation. Thanks all that you need is in the SDK files: http://www.routerboard.com/rb200.html Ok - I can understand that the SDK will allow me to compile code which will ru...

andret

Hi

Did you manage to get GPIO working under MikroTik? I have a RB230 which also has GPIO's but cannot find any method of implementation.

Thanks

Search found 37 matches

Re: Call a webhook on dhcp allocation

Re: Call a webhook on dhcp allocation

Re: Call a webhook on dhcp allocation

Call a webhook on dhcp allocation

Re: ESXi 6.5 U2 - Kernel panic on disk resize [SOLVED]

Re: ESXi 6.5 U2 - Kernel panic on disk resize

Re: ESXi 6.5 U2 - Kernel panic on disk resize

Re: ESXi 6.5 U2 - Kernel panic on disk resize

ESXi 6.5 U2 - Kernel panic on disk resize [SOLVED]

Re: Huawei Vodafone K3520

Re: Cannot netinstall RouterOS 3.30 or 4.2

Huawei Vodafone K3520

Re: Spliting local and international traffic

Re: Spliting local and international traffic

Re: Spliting local and international traffic

Re: Spliting local and international traffic

Re: Spliting local and international traffic

Re: Neighbor support on web proxy

Re: Neighbor support on web proxy

Re: Neighbor support on web proxy

Neighbor support on web proxy

Port speed for usb 3g/hsdpa adaptors

Re: Wireless mini pci support

Broadcom BCM43xx

Wireless mini pci support

Re: Spliting local and international traffic

Re: Spliting local and international traffic

Re: Determine day of week and hour of day in a script?

Determine day of week and hour of day in a script?

Re: Problem with MRU? - MT3.23

Re: Create PPPoE connection from VirtualMachine?

Re: Confused with MTU & MSS without PPOE

Re: Create PPPoE connection from VirtualMachine?

Problem with MRU? - MT3.23

Re: GPIO on routerboard hw

Re: GPIO on routerboard hw

Re: GPIO on routerboard hw