MikroTik

Ascii

Do Mikrotik have some kind of approval/declaration letter that FCC ID: TV7RB912G-5HPND is valid for model RB912UAG-5HPnD-OUT. I can´t get the usage certification here in Ecuador if the FCC ID if for one model and Basebox5 is another one. Here the problem. FCC ID: TV7RB912G-5HPND is for model RB912G-...

Ascii

We have 2 providers and our own ASN and IPs
Downstream load balance work fine with BGP and 2 peers.

However mikrotik IPv6 don´t support policy routing.

Any idea how I load balance my upstream traffic?

Ascii

any word from mikrotik?

Ascii

bump

[Ticket#2013090966001417]

Ascii

I need to get a certification for Groove 2HN and 5HN here in Ecuador. The regulatory authority (SUPERTEL) ask for some kind of test OS, so they can issue a command and test the transmitting power/bandwidth. They tell me that is a standard requirement, and that they have been doing this with Mikrotik...

Ascii

I´m also want to know how you solved the problem.
did you tried the Mikrotik POE injector? RBGPOE

Does the RB411GL have a plastic or metallic ethernet port?.

thx
A

Ascii

any news about the new routing package?

Ascii

WDS solve nothing

Ascii

look like OSPFv3 only advertise the first IP from an interface. Router 1 ether1 Area Range 2803:4c00:ffff::/64 2803:4c00:ffff::10/64 2803:4c00::1/64 Router 2 ether1 Area Range 2803:4c00:ffff::/64 2803:4c00:ffff::1/64 2803:4c00::1/64 never get advertise to router 2. I have tried redistributed-conecte...

Ascii

ok

64Mb NAND get divided between

32Mb system partition
32Mb free storage

why someone mention about 41Mb free storage???

Ascii

Exactly how much NAND does the 1100Ahx2 have? 64mb??? 48mb???

I don´t care for the small NAND if RouterOS can boot from microSD.

Ascii

I have the same problem before.

I can reproduce the problem.
If I change my network 10.255.255.0/24 to 10.255.255.0/25 using winbox the LSA disappear.
The problem only happen with external routes (redistribute connected/static)

Ascii

NO, you can keep you peers in the same subnet.
Type 5 LSA are used for external routes, not peers.

make sure that you don´t redistribute connected routes.
make sure that all yours externals (Static routes) are flooded only from one place in the network.

A

Ascii

any news?

Ascii

I sent two Supout.rif (taken at the time of the problem), and get some generic response about NBMA .

Ticket#2011110166000502
Date 1/Nov/2011

For mitigation look at my two previous post in this thread, I don´t have a single problem after the changes.

Ascii

please post your problem here

http://forum.mikrotik.com/viewtopic.php?f=14&t=54076

Ascii

I think that your problem is hardware related. Try to replace the capacitors, on some RB-s help that. On this problem, I am sure replace capacitors will help: "In all these cases the issue almost completely disappeared by feeding the board by jack and at the same time not using the POE ports a...

Ascii

announce more specific prefixes with session 1

for example if you want to announce 192.168.0.0/21
with session 1 announce 192.168.0.0/22 and 192.168.4.0/22
with session 3 announce 192.168.0.0/21

Ascii

for a workaround look at http://forum.mikrotik.com/viewtopic.php?f=14&t=54433

Ascii

I have 2 border routers (same location, 2 providers) than flood 0.0.0.0/0 into the ospf cloud However one of the border routes have Default Route metric set to 2 , this way I only have one 0.0.0.0/0 with metric 1 from the other border route. something like /routing ospf instance set metric-default=2...

Ascii

I make sure that all my externals are flooded only from one place in the network.

For example an /28 flooded from 2 locations (main link, backup link). Change to 2x /29 (main link) and /28 backup link.

I don´t have a problem since a make this changes a week ago.

Ascii

Last week I send a similar report to mikrotik and get this response: > Configure NBMA on wireless links and see if it helps. > Instructions are in the link below: > http://wiki.mikrotik.com/wiki/Manual:OSPF-examples#NBMA_networks I have over 20 sites running OSPF (3-5 routers per site, 3 areas). I c...

Ascii

I have exact the same problem, any word from mikrotik about this problem

Ascii

Ascii

look like bridge filter don´t work anymore

also there is a problem with bridge MIBs and SNMP(Ticket#2011060466000043)

Ascii

right now I´m using BGP signaled VPLS without problem (single broadcast domain)
LDP is disabled in all routers.

Do I need to enable LDP and add LDP interfaces??
I want to minimize the ethernet broadcast

Ascii

Ascii

According to http://wiki.mikrotik.com/wiki/Software_levels Level 3 license only support 1 vlan 1 EoIP however I´m running a 3x EoIP tunnel in a RB411 with level3 license without problems. Also I can create multiple vlans without problem. Tested with ROS 3.10 & 3.30 Any idea??? Maybe the feature ...

Ascii

I have the same problem since version 3.23 3.24. Look like /ping ignore src-address option
Try with version 3.22
I use /ping with src-address for IPSec keep alive.
The problem remain in setups without IPSec.
Tested with RB411,RB433,RB450.

Ascii

have a similar problem when I begin to use RSTP + WDS, every 30s-60s the entire network freeze. Look like the problem is the dynamic wds cost, you have a wds link that change the cost every a few seconds, this force a recalculation of the RSTP root and freeze the entire network. check your WDS Cost ...

Ascii

what is the best Framer Policy for AP
dynamic size?? none??

with BH links I run best fit without problems.

Ascii

I can confirm the bug, RB433 with wireless-test 3.23

Search found 32 matches

question about FCC ID: TV7RB912G-5HPND

IPv6 how to load balance upstream traffic?

Re: MIkrotik BGP Monitoring

Re: need a test OS for mikrotik Certification

need a test OS for mikrotik Certification

Re: RB411GL Poe Woes

Re: RouterOS v6 release candidate 1

Re: Ospf 3.10 BUG: Database Description packet has different

OSPFv3 multiple IP per interface

Re: RB1100AHx2 Memorygate v2

Re: RB1100AHx2 Memorygate v2

Re: OSPF change prefix len on connected subnet, subnet not a

Re: OSPF Type 5 LSA flooding but not added to route table?

Re: 2.4Ghz Groove...

Re: OSPF Type 5 LSA flooding but not added to route table?

Re: OSPF disappearing default route in RouterOS v4/v5

Re: RouterOS v5.9 released

Re: load balancing 2BGP DR and another 2BGP with 30k prefixe

Re: Disappearing Default Route in OSPF

Re: OSPF Type 5 LSA flooding but not added to route table?

Re: OSPF Type 5 LSA flooding but not added to route table?

Re: OSPF Type 5 LSA flooding but not added to route table?

Re: OSPF Type 5 LSA flooding but not added to route table?

Re: BGP VPLS + LDP

Re: RouterOS v5.4 released

BGP VPLS + LDP

Re: EoIP level 3 license

EoIP level 3 license

Re: problems with ping and src-address

Re: Network with large diameter getting unstable

Re: Nstreme Advantages

Re: Bug in wireless-test package - MT please correct.