MikroTik

daitea

hello now my isp wants me to create a vpn using Archilles-Apn 3969 and archilles - internet 3944

Please help me do this on my rb433

daitea

hello now my isp wants me to create a vpn using Archilles-Apn 3969 and archilles - internet 3944

Please help me do this on my rb433

daitea

please also give step by step procedure to setup this configuratio

daitea

my new network requires i use a cisco router to do multiple vlan and tunneling can i use rb 433 or 133 to do the same? please help

daitea

i have a network running with a telephony ISP and i want to deploy an APN along with rb411uahr since it has a sim card slot so i can provide internet as well on the APN but i also want find out if i can use the same rb411uahr for the vpn clients since it will be a device convenient for indoor. Pleas...

daitea

yes that is it but the guys on the micowave network dont think the ip router will work on thier network
and they want to sell microwave dished to me at a cut throat price
please help

daitea

i want information on how to use a mikortik router to connect to a microwave network and pass traffic as usual
please help
thank you

daitea

login with winbox and then telnet in to base station

daitea

like u logig to the base station and issue in wi on thecommand line
u geta prompt with wireless interfce> if i issue print nothing appears

daitea

i have a 433 base station but when i connect clients to it and try to issue commands inside the 433 it dose not work
what can be the problem and how do i solve it

ben

daitea

i have created the tunnels in the mikrotik router and i can see them been active(R) but i can ping them in the cisco. this is what i did; 1.) [admin@Archilles_Takoradi] > in eoip [admin@Archilles_Takoradi] interface eoip> p Flags: X - disabled, R - running 0 R name="eoip-tunnel1" mtu=1500 ...

daitea

i have a client who has cisco router at two end with tunnel configured on them. We are trying to make a tunnel on our network to link the 2 cisco routers but its not working. he is behind 4 Bs and we did a simple route which allows us to access the two routers but the tunnels in tthe cisco is still ...

daitea

i will try it and get back

daitea

this policy is fine but what i am looking for is for 2 different internet source going to two different client who connect to the same base station

daitea

i have two source of internet at the same base station and are connected to the same rb. i want to pass them to different client radios. how do i do that. ie client A group has ip 10.1.45.0/24 with internet gateway 192.168.1.1 client B group has ip 10.1.46.0/24 with internet gateway 10.0.97.2 Pls ho...

daitea

the whole problem is this. the are two different dns on the network 192.168.1.1,192.168.1.1 and 4.2.2.2,80.87.76.36. now what i want to do is this, i want a situation where if the internet link using the first dns goes off i dont have to change the dns in all the client radio but the still browse th...

daitea

how do i setup and run a local caching resolver

daitea

i have two internet source with different dns address.
how do i keep them both running so i dont have to change dns with i change internet source. since a change in dns will mean to do same for all clients.

daitea

i have 2 411rb and i cant reach them with any cable more than 2 mts long.

can u help?

daitea

Hi All
i want to prompt the client by redirecting the clients to a page either than the net if they are due to pay their monthly bills.
How do i do this without the client having internet access and have the message stored in the router board?

daitea

we are all on the same network. the base station is 10.1.95.1/24 and they are using 10.1.95.200/24 and 10.1.95.201/24. so it is rare for me not to reach them after putting the codings even though they appear in the registration table.

daitea

i have used the first coding but then i cant reach them both

daitea

i have two clients who have internet and want to use my base station to link the two. i dont want to allow them to get access to my setting,internet which is on the ether1 of my base station. it look like anytime their internet like goes down they will use mine but will not pay so we have to have co...

daitea

how do i configure dude to send error messages to my email as at when errors occur?

daitea

anytime other wireless network users scan for their radios they see my network and that is fine by me. my problem here is they should not be able to connect and pass traffic unless they use some sort of authentication profile to do that. how do i set this profile correctly to put a good security on ...

daitea

i have set a dhcp on a clients rb and it works fine but anytime the rb restarts a new route will be created in the route table pointing 0.0.0.0/0 to the ether1 port.
i have look at the configuration and seem not to get where the route is coming from .

please help.

daitea

hi

i still cant make it work can i have a detail how to?

daitea

no firewall rule

daitea

can it also work if we configure the rb to dhcp?

daitea

how do i know what port the device will use and how do i configure that?

daitea

The point is i dont know how to configure the udp on the rb and the service provider thinks if i allow the end user equipment to get udp from the board then transmission will be fine

so lets configure upd

daitea

Hi All,

I have problems in get my end user equipment (webcast conference camera) to use udp protocol.

I will like to know how to setup the routerboard to enable the end user equipment to use the UDP protocol.

pl help

daitea

Winbox

daitea

i dont understand
i know tools to be a command but then Btest and Bandwidth Test is confusing me

daitea

i will like to know how to test my internet upload and download capacity that comes in and out of my base station

Pls help

daitea

i want to make all clients to access their ether1 port by dhcp
currently they have to buy extra routers to do

pls show me how to confiqure dhcp so i can cut off the extra cost

Regards

daitea

pls give me the url

daitea

where is the best dealer for Wireless miniPCI and Cardbus radios (2.5ghz and 4.9 ghz)

daitea

Hi All, This is a system i want to setup on the network to prompt clients that they have been disconnected. I wish to have it run along side with the internet so that users of the internet will be redirected to that server which will display a disconnection message. Please help me configure my RB to...

daitea

no its not . its just that if i issue the reboot command then it resets

daitea

my 133c base station reset any time i reboot
what can i do to stop it from resetting instead of rebooting?

daitea

i can route to only the ether port but not the wireless interface

but i want to pass traffic from one boards ether port to the others wireless interface

daitea

i have connected two ether ports together to have two board work together but all i can do is to make them ping each others ether port but i cant reach the wireless interface when i ping it

can you please help me with the routings?

daitea

should the ip be in the same block with the same subnet mask? like if board a has 10.10.10.1 255.255.255.0 and board b 10.10.10.2 255.255.255.0 OR a have 10.10.10.1 255.255.255.0 and b 10.0.1.2 255.255.255.0? then in the route i have problem making traffic pass through each other. it becomes very slow

daitea

i want to connect two boards together on a tower by using their ether2 ports and a straight cable.
it is connected alright and i can see both in the neigbours and i can ping the mac adresses but can not reach them by the ip addresses

please help

daitea

Can i run winbox with my apple OS ? and how

daitea

in the issuse of not been able to ping both aps i think it i am not able to mac ping both wireless cards even though it is connected.

please help if u have any solution

daitea

wow finally it worked and the 133 rb is back in good shape

i will go up the tower and install it
then i will be ready to share this experience in the forum

Thanks very much

daitea

ah sorry i just saw that the version of the OS is 3.13

can i please have the link for this version?

daitea

its still the same

daitea

if i put this file in the file list and reboot the rb nothing happens.

daitea

can u please give me the exact file name?

daitea

its still the same

daitea

i have tried various cards but they dont work
cm9
r52
r5
ubiqut
they all dont work on the card

daitea

no. this is how the winbox look like

daitea

sorry i cant find the button at all
and if i use the command line its the same not that it comes up and i cant configure it
it not there at all

daitea

after upgrading the os of 133 to 3.x i cant find the wireless interface button to configure the wireless card
what do u think the problem is?

daitea

how do i solve a console crashed error on a 133c router board. any time i try to enter this rb by winbox i get the router has been disconnected and when i use telnet on the command prompt too i get the console crashed , system is busy or halted try re-entering error . what is the best way to solve t...

daitea

so which is good. a high ttl or a low ttl?

daitea

first of all what is the meaning of the ttl

i do get these two reply on the same network. the 192..... is from my desktop to another pc via wan and the 10 is in the wan can u explian why the ttl is different?

192.168.0.3 64 byte ping: ttl=127 time=5 m
10.1.80.8 64 byte ping: ttl=64 time=9 ms

daitea

i am at 10.1.90.1 and i ping 10.1.90.110

the rout is to stop the ip 10.1.91.2 to 254 from working but ucan ping all of them

the whole idea is to make sure no ip in this block 10.1.90.1/24 works without my knowledge

so if u know any method i will be will to accept

daitea

everything is yes apart from it been a bridge

daitea

it still does not work.
all ips on that block are still replying
and traffic is been passed alright
is there a way i can do this ?

daitea · Re: Firewall Filter Rule i still do have a reply on 10.1.90.110

i still do have a reply on 10.1.90.110

daitea

This command is for preventing the ip address from working "chain=forward src-address=10.1.90.110 action=drop "
how do i block the whole of 10.1.90.1/24 and allow only a few to work as and when need be?

this will be a good security for my network

daitea

i will like to know how to calculate for the number of ips to use for my network.
for example if i want to use 255 ips i know its 192.168.0.1/24 and this gives me up to 192.168.0.255

what about 2,4.6.12. and so on

daitea

this is the area where the link will be establish

daitea

I want to create a 90 km p2p link using Mikrotik wireless router boards. Can i be adviced on what to use as in rb, wireless card and antennas so as to get a good gain. Also this is the gps reading of the two point i will do the link 7 35 10.55 n 1 55 14.84 w elev 1355 8 13 59.48 n 2 16 54.87 w elev ...

daitea

i have been able to get the 2 aps connected but the problem is every 1hr it goes off and u cant ping both aps but they as still connect with the wds and the bridge all showing that its connected.

i always have to change the mode to AP-Bridge or bridge before it works

what can this be?

daitea

Thank you.

i will do that and let u know

daitea

i cant use the mac address when i find it by browsing for it in the winbox nor the ip address that comes with it.

the lights at the ethernet port flashes alright indicating that the port is working well but i cant enter the board to do any advance settings

daitea

i have a board that runs with a 64mb compact flash card. i did change the ip of the ether1 port and i cant enter the board and more either by the ether port or by serial cable. if i try to use winbox i can see the mac id and ip when i press the browse button but can not access the board. what can th...

daitea

All they said is their network is open so we should find a way to get the public ips.
so lets start with how we can use the ipsec to get the public ips

daitea

i am going to ask them to put it into writting exacty what they want and get back to you

daitea

My ISP demands that i put a cisco router before they can give me a public ip but if my router board can do tunneling then they will accept it and pass the public ip address on i want to find out if its possible and how do i do that configuration. their main issue is security. so no one can pass thei...

daitea

How do i clean everything off this 133c rb and do a fresh loading?

daitea

what port should i use?

daitea

no please help

daitea

please help me .
how do i ftp into an rb?

daitea

i can get to configure the wireless card since the is no wireless button on the left pane

daitea

i still cant get this rb to work
can we make this work?

daitea

and then what next Sir?

daitea

this is the message i get trying to load netinstall to 133c Press any key within 2 seconds to enter setup.. trying bootp protocol..... OK Got IP address: 192.168.0.111 resolved mac address 00:1B:24:AC:4F:15 ******************************************************************************** ************...

daitea

yes i can winbox the rb. so what next?

please help here

daitea

i cant post anything again. the mac id will not even resolve when i try to run the netinstall.
is there a way i can redo everything again?

please advice

daitea

Hi everyone, I think i have it all confused again. After the re installation of the 133c rb i got it working but is was slow so i did a downgrade but after that see what the winbox looks like. No wireless button to configure the wireless card here is screenshots and i hope we can get a quick solutio...

daitea

Hey no one replied to this
help is needed here ASAp

daitea

5ghz at 8dbi

daitea

i am trying to connect a client who is 15km away from the base station with a 411rb and a r52 wireless card but it does not see any of the interfaces at the base station. Do u think i can make it?

daitea

i do this most of the time and it does not work.
i will have to hustle with it

daitea

i always cant figure out which folder i should unzip files into for the netinstall to load

can u hep?

daitea

where can i get RouterOs 2.9.51 for the RB133C ?

daitea

the Version is 3.xx alright but i cant get into the board now to look at the cpu load so i guess i have to clear everything now right?

please give me the proccedure to erase everything off the board and where i can get the version 2.9.51 so i can reload it well

Thank you

daitea

i used the upgraded from the hyper terminal and load the boot file again. so i had ver. 2.18 then i was able to run the netinstall program to load the new version of routerOS then i went into my account server on www.mikrotik.com to request for the key which was provided in minutes. the board came b...

daitea

ok the problem has been solved but a new one is bothering me.

the rb has become very slow and keeps rebooting every 40mins after i upgraded the firmware and loaded new OS

what can this be?

daitea

yes i got the 2.18 alright. but i still dont see why it will not open the netinstall after changing cable and ports

daitea

same thing Sir

daitea

its still the same thing

is there a way u can come into this pc and look at it?

daitea

Hi, i have 133c client board which will not boot so i tried using the console side to enter but this is the message that came up RouterBOOT booter 2.11 RouterBoard 133C3 CPU frequency: 175 MHz Memory size: 16 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting u...

daitea

no just a software that i can use to convert the readings of my gps

daitea

can u please help me with a software package that can read the readings of a GPS and convert and them to the actual heights and distance?

daitea

i have the RB right here with me and its connected to this pc. The orange light stays on but the green light is off. i can only log into the board by wireless and if i reset RB i cannot enter anymore since i cant use the console null modem cable as well.

what do u think i can do

daitea

it means you got it to work at 100mpbs on the ethernet port ?

daitea

ok i will do that and get back to you

daitea

do i put this firewall command in the client's radio or the base station

daitea

ok i hear u but my problem is troubling me alot

daitea

ok i will try and get back to you

daitea

what isi the meaning of what u are saying

daitea

i have a 433AH and 532 routerboards that i cant use the ether ports to access them. pls help

daitea

i have a 433AH and 532 routerboard that i cant use the ether ports to access them. pls help

daitea

Hi All
i want to redirect my clients to a page either than the net if they are due to pay their monthly bills.
How do i do this without the client having internet access

daitea

i can connect to board but cant see wireless cards

some of the boards i can connect to board but cant use the ether port to access the boards

the rest can not even complete the boot process. what happens is they dont even beep .

daitea

can you help me through the steps to get it working with netinstall on windows vista?

daitea

my next problem is how can i use a cat5 cable reload routeros to my router boards. most of my boards have problems with the pci slots and power and i want to fix them all

daitea

i got it working now by disabling the virtual Ap and assigning ips to the bridge instead

thanks a million

my next problem is how can i use a cat5 cable reload routeros to my router boards. most of my boards have problems with the pci slots and power and i want to fix them all

daitea

its connected now and it has created a wds with a DRA but i cant ping each radio's ip

daitea

Thank you very much. this is fine but in my case i have two ap. One (ap1) has the gateway to the internet and the other(ap2) connects to it in a client mode. I have put a client behind the ap2 forcing me to then ap2 to a ap-bridge mode but i still want it to connect to ap as well and maintain ap1 in...

daitea

i have two aps and they both have clients connected to them. I want the two Aps to connect together so i can pass traffic between them and still maintain the clients at both end.

please help

Search found 118 matches