+1 docmarius - Thank you. We are aware of it and it is reported to developers. tetecko - We can not make sure that everything can be done with single click. Why do not jut use "X" to close Winbox? Some of us don't use microsoft :-) I have OSX, and CrossOver, so press X do nothing, and if I...

Hello
I've solved today changing the card with another.
Thanks for you support!
Regards

I'm very new to ROS, and I'd probably like to maintain and generate all my iptables rules via something like FWBuilder.

Is there some way to bring in those rules (via bash script) into ROS?

TIA
-Greg

Hi!

Is it FWBuilder compatible with Mikrotik devices?

Thanks

Hi, same problem with 6.0beta2 Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... OK jumping to kernel code Starting... Starting services... MikroTik 6.0beta2 MikroTik Login: Oops[#1]: Cpu 0 $ 0 : 00000000 00000064 d1320000 deadc0de $ 4 : 000000c8 ...

During boot, if R52H is connected, I can see this by serial port: jumping to kernel code Starting... Starting services... Oops[#1]: Cpu 0 $ 0 : 00000000 00000064 d1320000 deadc0de $ 4 : 000000c8 00004d58 ffffffff c03bebac $ 8 : c03c2c65 00000000 000000bc 00000000 $12 : 00000000 080072ff 080072df 6e6...

Hi! I've added new R52H to my RB411U (Level4) with 5.16 firmware I can see IRQ /system resource pci> print # DEVICE VENDOR NAME IRQ 0 00:12.0 Atheros Communications Inc. AR5413 802.11abg NIC (r... 48 but not interface /interface> print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME ...

Wlans are not mentioned there because, EoIP tunnels are running over each wireless link and then those EoIP tunnels are bonded together. Just look at picture it explains everything.

I have tried it without good results

Can I leave Radio1 and Radio2 without IP address?

Thanks

ssid frequency and other wireless settings has nothing to do with bonding. Go to wireless section of the manual and look for answer there. http://www.mikrotik.com/testdocs/ros/2.9/interface/wireless.php Is it the corret way... A: interface wireless set wlan1 ssid=Radio1 frequency=5805 mode=bridge d...

Wlans are not mentioned there because, EoIP tunnels are running over each wireless link and then those EoIP tunnels are bonded together. Just look at picture it explains everything.

Thanks for reply!

And where I can set freq, ssid, etc.. for radios?

Hello! I own 2 Mikrotik N2458 0.05. The mainboard has 2 radio modules. I'm interested in creating a radio link with bonding (rr) for packet aggregation. This guide http://wiki.mikrotik.com/wiki/Bonding_Examples doesn't clearly explain how, it doesn't even mention about wlan1 and wlan2 Do you have an...

Open the antenna unit to gain physical access to the Mikrotik RouterBoard. Then connect a serial cable like this and fix your mistake.

http://www.roc-noc.com/product.php?prod ... t=8&page=1

Tom

Solved opening it and using serial cable

Thanks agin!

use console cable

Hi!
Thanks for reply.
In my Mikrotik Nebula I have only one port ethernet from outside.
Can't recovery it without open the Nebula device?

http://www.flycommunications.net/downlo ... 1227874554

thanks

Hello
I have Mikrotik N2458 0.05

I have set ALL interfaces (radio and ethernet) in shutdown.

I'm not able to connect with my Mikrotik...

Can you help me?

Regards