MikroTik

dlabreu

I try that and it work , i just really would like to know if this is the only way?

Thanks

dlabreu

Hi There , thanks for your input i shuld remove that from the post , i disable the rule because it was not working , but even if i enable it does not work do you have any idea why?

Thanks

dlabreu

Hi to all. I would like some help in a problem that i have on my firewall. I have in my network a Squid box running as a proxy , so what i want to do is to get all traffic going out on potr 80 redirect to my squid box on port 3128 like that i can make a transparent proxy. Here it is my firewall rule...

dlabreu

Hi There. As far as i can see your sertup is right , but you will have to tag the trafic to pass the vlans on the wifi link , i have not work with ubnt wifi link or routers but shuld be all the same as per protocol standards. This wifi link shuld operate as a network cable so the idea is to pass a n...

dlabreu

Hi there.
Try not use bridge , try to use master and slave port and try not use vlan I'd as 1 because every manage switch have a vlan I'd 1 as default and if u do any setting wrong that will give u problem , please let me know if u need any more help.
Thanks
Daniel

dlabreu

Hi There , thanks for your help , just a small question , my interface is a openvpn client , can i change the eth1 on the script to my openvpn interface?

Thanks

dlabreu

Hi to all , i need some help on a script. I am very new on do script for Mikrotik and i need to do a very simple script , that every time that the routerboard start it delay one interface to start in about 60 seconds. Or we also can do a script that every time that the routerbaord start , it disable...

dlabreu

Hi There , i am looking for some help on a routing problem that i am facing. Just to let you guys know the environment and then i make the question, we have a corporate network and the Guest Network, and a OpenVpn Server. The fortigate device handle the Corporate network and the Mikrotik handle the ...

dlabreu

Hi , Thanks very much for your reply!!!

Now i know what direction to go!

Thanks one more time.

Daniel

dlabreu

Hi to all. Just have a quick question for the gurus. I have a rb 750GL that is dialing out to a Open-Vpn Server Linux Box. I see that the Router Board dial out and try to connect but the log say that. unknown cipher alg or key size i also know why this is happening but i don't know if i can fix , th...

dlabreu

Hi There. I fix it using the serial cable , my update did not went well so i got this manual. http://wiki.mikrotik.com/wiki/Manual:System/Serial_Console Went into a cabling company and they did the cable for me with this specifications as the manual say then i use this tutorial. Net install http://w...

dlabreu

Hi Vikas

Thanks for your help , yes i am dialing into a FortiGate-111C

Do you have any template for ipsec vpn , then i can put in my house and try dial to the office.

Thanks

dlabreu

Hi Vikas.

Thanks very much for your help.

So you manage to get the IPSEC vpn between Router Board and FortiGate, and no problem all working?

I thanks you for your Documentation , i would like to know if you have some more?

Thanks

dlabreu

Hi Guys. I just would like to know and also if someone have some document on IPSEC vpn between Router Board and FortiGate. My scenario looks like this i have FortiGate as a VPN server and some Router Boards in Other places that i would like to dial into the FortiGate. How can i make this possible? T...

dlabreu

Hi to all. I would like to know if this is possible. I got a device in my network that have to have full access to internet inbound and outbound. I need to create a rule on my firewall that will do that My network looks like that Public ip -------------RB1100 nat ---------device on ip 10.0.0.232 How...

dlabreu

Hey Guys.

I just would like to say thanks to all that help me and the community.

I manage to get the RB back in action and now is 100%.

Thanks to all

dlabreu

Hi there , have you tag the trafic?
Going out your Rb?

dlabreu

So now everything is 100%??

dlabreu

Hi there flush your DNS , there is place to click on the DNS that will flush it and then you see if your DNS enteyrs work

Thanks

dlabreu

Hi to all. Just want update everyone here in the forum. I got this setup working regarding the Vlans it was not a simple Task but I manage to get done. I did not manage to run the mesh network so what I did I set the 3 AP's (RB433) that I have pushing the same said in diferent chanels. Is there Any ...

dlabreu

Hey Fewi .
Sure I will do that for you.
I get the screens shots and post it here for you thanks

Daniel

dlabreu

Hi there.

Does anyone know how to restore this router board ??? Or what that LED on means?

Thanks

Daniel

dlabreu

Hi there I did use winbox to do this upgrade.

Thanks

dlabreu

Hey Thanks to get back to me.

Yes i did try the 400 series.

How can i do a net install if the router board does not respond on the serial port??

Thanks

dlabreu

Hi There.

Yes it was , no problem , i just want to keep it up to date and i end up on this problem.

Thanks

dlabreu

Hi There.

Thanks very much for your input , but i have try the serial port and nothing happen , really.

I even try the same link that you have post me.

I dont know what to do any more.

But thanks one more time for your help.

Daniel

dlabreu

Hi Guys. I have a new RB 433 UAH that i upgrade the OS and after that it does not boot up any more. Try with POE and different power supply to make sure power was not the problem. The RB come up the light shine on the network interfaces but no beep sound come up and then the LED LD504 come on and th...

dlabreu

Hi Guys. I got another question here. Look i simple got a rb 433 on my network as a access point and looks like it work fine for internet , but wend i try to copy a file from my computer to the file server using wifi i got 400kbps , this is very slow. Is there any way to get this fatster? Thanks

dlabreu

Ola Jorge , na verdade sou Brasileiro mas nos entendemos muito bem !!! Look , you say that Mikrotik will not IAPP , i read on this weekend what is it , and now i got a question. I will deploy 3 routerborads for now , but the plane is for have 12 Boards and have Wifi everywhere on the Studio and on t...

dlabreu

Hi Guys. I'm being using mikrotik for about year but never have to face a mesh network with WDS, i would like to know where to start. That is my senario. 1-RB 1100 - Running as the core of my wifi network with a live ip on it and nat the internet trafic in , running as DHCP, DNS,Firewall and Hotspot...

dlabreu

I need to ssh one of my server that have a ip 192.168.55.22 from the internet. How can i do that , must i jusr fwd the trafic into that ip or must i create some kind of routing rule? That is how my setup looks like RB 433 eth1 = Static ip Add eth2 = in Bridge - 1 eth3 = ip 192.168.55.27 Wlan1 = in B...

dlabreu

Guys need some help here. I want to create into the place that i work now one Wifi network its a big office and i got 5 RB 433 and i would like to create one big wifi network with just one SSID so wend the user move to far from one antena he can just jump into other one automatic. How can i do that?...

dlabreu

Hey Man!

Thanks very much for your help.

The rule really work , but the only problem is wend i put the site that i want on the rule and i hit the apply button the mikrotik resolve that name and become a IP, and then redirect me for a webmail page hahaha.

Do you know why?

Thanks

DANIEL aBREU

dlabreu

Hi Guys! I will run a network with about 200 Computers , the Core Router it will be a RB433, on this network there is 4 computers that must have no access to the internet , they must just visit one website . How do i setup the mikrotik for every time that the user put on the browser any website it r...

dlabreu

Hi There!

I am also have the same problem , can some one help us out?

Thanks
alot!

Daniel

dlabreu

Hi guys , my question it is very strait forward.

I need to put on a simple queue my dhcp range from 192.168.1.100 to 192.168.1.199 , how can i do that?

Thanks

Daniel Abreu

dlabreu

Thanks for all the help guys!

snowman040 , i have done the tip that you told me and it work!

Thanks very much , problem solve !

Daniel Abreu.

dlabreu

Hi guys , i have got the same problem. Just need to know more about this script , can you guys help me out here, we have a Draytek 2910 as a VPN pptp server and we connect the others branches using router boards 450 but wend the ip on the dns name change i lost connection, i just want to know more a...

dlabreu

fewi - this is all my rules on my firewall nat table. kthameen - Thanks very much for tell me about it , but if you can help me out , i just want know how can i route that rather nat into my network. Thanks alot Daniel 0 ;;; Masquerade chain=srcnat action=masquerade 1 ;;; Redirect Port - Server chai...

dlabreu

Hi there! I have one problem here that i hope some one can help me. We have here in some clients Router boards that dial in into a vpn server ( Other kind of router ) does work fine the Router board connect and everything works well. until the ISP change my ip add. The mikrotik are dial in using a d...

dlabreu

Hi there! Thanks for the answer That is my redirect ports running on the router board now ;;; Redirect Port - Server Voip / SIP - UDP chain=dstnat action=dst-nat to-addresses=192.168.37.25 to-ports=5060 protocol=udp in-interface=pppoe-out1 dst-port=5060 6 ;;; Redirect Port - Server Voip / IAX - UDP ...

dlabreu

Hi there. I have on Question here that i have no idea why is doing that. My Question is : In my company we have a Asterisk PBX working fine , and on the Mikrotik i redirect the SIP port into the Asterisk box , and work fine, the remote user can connect and make phone calls with no problem but if i c...

dlabreu

Hi There , Thanks for helping , this is the setings that i am using here. If you want to check up if i have made any mistakes. Thanks alto Main Antena Under Wireless tab mode:ap bridge Band:2.4GHz - B/G Frequency:2412 SSID:saga2009 Under WDS tab WDS Mode:dynamic WDS Default Bridge:bridge1 Wds Link U...

dlabreu

Hi There , Thanks for helping , this is the setings that i am using here. If you want to check up if i have made any mistakes. Thanks alto Main Antena Under Wireless tab mode:ap bridge Band:2.4GHz - B/G Frequency:2412 SSID:saga2009 Under WDS tab WDS Mode:dynamic WDS Default Bridge:bridge1 Wds Link U...

dlabreu

Hi Guys , i have here with my 2 CPE Antenas with the 411 Router board inside. I have made one antena a bridge , and the other a wds station , that give me access to my network . This antenas are aprt about 300 meters , and is s Slow , i have pings about 30 seconds. Do you guys have any idea why is s...

dlabreu

Hi There!

Thanks very much for all your help i will try this on monday on my office.

Thanks alot for the help.

Daniel Abreu

dlabreu

wend can i skype you?

dlabreu

Hi!

Thanks very much for your help , i just want one more favor , i have no idea what each rule does.

Can you please just let me know ? i will be very glad for you help!

Thanks

Daniel Abreu

dlabreu

Hi There.

I have no idea how to make it so that is way i am here, how can i make a rule to my firewall that every trafic that comes from the internet get's droop , and then i will be open just the ports that i want.

How can i do this?

Thanks

Daniel Abreu

dlabreu

Hi There!

Thanks very much for your replay , but were in the webproxy i set to store all trafic into the harddisk?

Thanks

Daniel Abreu.

dlabreu

Hi There! I have one idea and i just want to know if is possible and if it is how can i do it? I have one RB 433 with usb port , i want to plug into the bord one 500GB External using the usb port , and store all the trafic from the webproxy into it. Is that possible? and if is , how can i do it? Tha...

dlabreu

Thanks very much for all the help!
I find one way around!

Thanks

dlabreu

Hi Guys! Thanks for all your help , i just want to know one thing, the company that i work for have alot of Linux Server into the clients and i want to does server to connect into my Head Office Router Board 433. Does server using Openvpn with SSL, i just want to know if my Router board support SSL?...

dlabreu

Hi Guys , i have to ask you all.

I need to setup one simple queue that will give to some computers into my network just 1m for the lan.

eg: 192.168.5.222 need to have 1mb access to the network 192.168.5.0/24

Does computer will have no axxess to the internet.

How can i do it?

Thanks

daniel

dlabreu

Hi There. I am working on one project , that i will have to do internet agregation, and i don't know how to do it. Wend i went to the Mk Course in JHB South Africa , the teacher told us that is possoble , but he didn't told us how to do it. So i hope you guys can help me on it. I have one Mk bord 43...

dlabreu

I am so Happy!!!

Thanks my friend!!

I got working!

Thanks alot for your help!!

Daniel

dlabreu

I did , and i note that i have the new dude package in there?

But now how do i access this dude?

Thanks ALOT for Helping!

dlabreu

Hi My friend!

Thanks so much for the help.

I did download this package For MIPS-BE (RB400) , and i drag and drop into the files on my Mikrotik bord , and now i don't now how works?

Can you please help me?

Thanks alot!

dlabreu

Hy Guys! I got this problem here , and i think for you guys will be easy to help me. I am new on MK , just come out of one corse, and i got this problem. Here in South Africa we have local Bandwithd " Range the ip in side South Africa " , and International Bandwitdh " Everything out s...

dlabreu

Hi Guys! This is my first post into the forum. I hope everyone is ok! So let's go to my question! I have here @ our offices and on clients Router Bords 433 and one friend of my that work on one ISP told me that i can install the dude into my mikrotik router bord , and access the Dude via webbrowser....

Search found 60 matches