MikroTik

jirristols

And so even me. I see this has not been replied to so I'll browse a bit more

- edit -
I did a system reset and it all came back
FYI for the future..
Save your configs...

jirristols

Simply bridge the Ethernet port that the pPPOe line is one, and the vlan you want it on. On the opposite end, you can do PPPoE clients on the VLANs. Are you sure that will work? I've tried that and it didn't seem to work... I'm going to recreate the setup and post my config if someone wouldn't mind...

jirristols

Hi guys, I'm trying to figure out how to tag 2 ADSL lines in seperate Vlans using ROS, send them over a wireless link to another MT-RB and have that RB Authenticate the DSL lines on that side so I can load balance them on with the RB. I believe the loadbalancing I can handle but I've always struggle...

jirristols

I will give that a try, thanks

jirristols

Exaclty what I was thinking, hyphens would solve my problems. If only MikroTik would conform :D but when this would happen is another thing altogether. I don't know if this is dumb but would it be possible to use some type of script for this? Or have userman be a server to the hostpot but also a cli...

jirristols

Hi, I am using hotspot on MikroTik V3.30 and my external radius server (Emerald Management suite V.5 with RadiusNT) cannot create a username with ":" as a character. I am trying to do MAC Authentication on a private office network where bandwidth needs to be measured websites blocked and ...

jirristols

I have a wireless network that is also running Hotspot, and users are logging in and after the first search on google requests they log in again and then they get the splash the whole time without being able to surf at all. Is the to do with extensive data-loss? The logs between the radios seem fine...

jirristols

Hey NetworkPro, Thats what I'm also doing, RB493 as main router PCC 4Lines and RB750 as hotspot router, How do I forward everything to my RB750 ip 192.168.2.253 interface=LocalLan V3.30 I want to espescially forward these ports: TCP: 37918, 1119, 3724, 6112, 6881-6999 UDP: 3724, 37918 These are the ...

jirristols

I am having trouble with opening ports using UPnP while Loadbalancing with PCC, the UPnP docs say you can only specify one External Interface... Is there a way around this except forwarding traffic to a single gateway that I want to open up ports to?

jirristols

hmph, I upgraded to 4.2 from 3.22 on a few test and did some tests and it seemed to be working alright, then I decided to replace our old loadbalancer and hotspot gateway with the mikrotiks (just to give you my situation now). RB493 as Main router for internet (PCC loadbalance 4 adsl lines and one l...

jirristols

Cool config, Chupaka I just want to know if you are using 4.x with the loadbalancing? Because I'm having a lot of trouble with 4.x and I'm downgrading today to 3.30 Until I can get everything sorted out.

jirristols

Those extra Mangle rules are probably for ensuring the connection remains on the same ADSL line (IP address) but I'm not sure, the change mss magle rules are added by default and are dynamic. I left my MTU setting on default 1480 when I created the PPPoE clients. The distance changes are either to e...

jirristols

Hi, I've also had problems with the loadbalancing for a while now even tried 2 PCC configs, the second one is a lot more reliable. My Internet banking is routed through a local ADSL account so that doesn't give any problems but I have had a few random times that the internet goes down or is really r...

jirristols

Wow Hey, something I can help with. I've been playing around with this PCC and found the same issue. For the static that is fine but for dynamic IP with PPPoE you have to specify the range of IP's you will be using. Seeing as you are from SA too here is where my IP range is but I think this is only ...

jirristols

Hehe I cheated that, I just edited all the rules, with comments "trafic that isn't local...". By Advanced (gui) I added: Dst. Address List: (inverted, check box checked) Localpppoe. Localpppoe is the address list I made with all the local IP ranges in my country) So now the mangle rules ar...

jirristols

Ok, banking doesn't work with Omega's config on my system. I have configured that all local internet traffic are routed through a local internet ADSL Line (ether1 has 2 accounts on, international1 and Local-PPPoE) and all internatioal traffic is routed over the 4 international PPPoE/ADSL accounts. I...

jirristols

Has anybody had a problem with World of Warcraft or teamspeak? This weekend I had to disable the routes to the other GW's just so WoW don't log off every ten minutes, This is the same with teamspeak, both log out at the same time. I'm going to try a different setup (the one omega is linking to) and ...

jirristols

How did you get the graph?

I'm running the PCC in my setup too and will also place my findings over the weekend here.

(mmm logged me out again before I could post PCC'ing around

)

jirristols

If I set the route distance GW1:1 GW2:2 GW3:3... everything goes through GW1 so doesn't work - no Load Balancing. My routes are: dst: 0.0.0.0/0 interface: inter1, inter2, inter3, inter4 distance: 1 All in the same single static route... this works If I create 4 individual routes, 3 routes are blue (...

jirristols

No haha, I didn't post the config, I'm splitting the traffic using static routes (splitting local and international traffic wiki) I have something like 1500 routes created so posting that would have taken up the whole page but here is a snippet [admin@RB493 Master] > ip route print Flags: X - disabl...

jirristols

Because the wiki says so... :( Then we will assign proper routing-mark to the packets leaving the router. add chain=prerouting dst-address=10.111.0.0/24 action=accept in-interface=Local add chain=prerouting dst-address=10.112.0.0/24 action=accept in-interface=Local I just substituted the 10.111.0.0/...

jirristols

OH and something else that might be an issue - My adsl has dynamic ip adresses - when specifying this: 9 chain=prerouting action=accept dst-address=41.240.0.0/13 in-interface=LocalLAN I use the IP range. This is the IP range for all my adsl connections as I am using the same ISP dishing out IP's in ...

jirristols

Giving it a try now, disabling the rule to see if it helps. I thought it had to be there for your LAN to effectively communicate to the outside world. edit: Tried that but it still doesn't remember I'm logged onto the forums and the internet banking on the computer tested still loops back to the ini...

jirristols

Sweet! It's a 2 step authentication, first account number and pin, it accepts, then you have to fill in the missing letters of your passphrase. You receive a text message "confirmation of internet banking" if you set it up, then after you fill in the blanks and click on logon it returns yo...

jirristols

Ok so I got the loadbalancing working with ppc and everything is fine on my computer, but most of the other users on the "localLAN" (bridged ethernet and WDS) cannot log in to their internet banking, even tried two different Banks. What could be the issue that it works for me on IP 192.168...

jirristols

That was the a snippet out of the config that Interpoint pasted somewhere around the middle of this page. This is part the pre-routing chain. I only "re-pasted" this part because I want to substitute the dst-address, which is a static ip, with an interface (out-interface=ADSL1) or somethin...

jirristols

To anyone still reading this, but especially to interpoint regarding his mangle rules here: /ip firewall mangle add action=accept chain=prerouting comment="" disabled=no dst-address=10.2.0.0/30 in-interface=ether6 add action=accept chain=prerouting comment="" disabled=no dst-addr...

jirristols

Hi, Here is my setup(refer to picture for a better idea): RB450 running rOS4.2. Hotspot and Userman Splitting local and international Bandwidthe over one ADSL line using 2 PPPoE accounts and static routes. Automatic Failover on sleeping GW over wireless link (same ISP) Main Issue: Everything is work...

jirristols

Hi, I was also looking into this. Firstly are you trying to aggregate multiple(2) ADSL accounts, let's say 2x 512k for 1024k internet speed? I have seen firewall scripts that loadbalances between the two but it doesn't give you a full trunk just splits the consumption over two lines but doesn't give...

jirristols

Other than the fact that somone was trying to ssh into my router from the wan side on the main log there doesn't seem to be anything dodgy or nonsensical. Only accounting failure, authorization failure and authorization success (104 total items). I don't know when these timestamps are as I had to re...

jirristols

I changed the radius server and router ip address to 192.168.0.254 and it worked. Now it seems to be down again (radius server not responding). I had the issue that I could not connect to the user manager web interface on http://192.168.0.254/userman if the hotspot and radius is on that same address...

jirristols

You guys are awesome!!! This was my biggest problem, thank you guys I'm glad I actually posted something and now it works immediately.

I'm trying to use this in a office situation but with MAC login, now I can try and figure out the MAC part at last.

Thanks again

jirristols

I have exactly the same issue, I can't find the solution anywhere and this post seems to have stopped as if silenced... I havn't even been able to use the radius function (use-radius) even once since I've used mikrotik, always the same error. Has it even been confirmed that setting the radius time o...

Search found 33 matches

Re: deleted USB port? (RB411U)

Re: PPPoE over VLAN's to other RB

PPPoE over VLAN's to other RB

Re: Radius MAC authentication problem

Re: Radius MAC authentication problem

Re: Radius MAC authentication problem

Re: Error causing crash, any idea's?

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: PCC question

Re: My kingdom for Load Balance!!!

Re: PCC question

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

Re: New firewall matcher PCC

RB450 Userman,Hotspot,Localsplitting,Failover

Re: Aggregation ?

Re: Radius server not responding

Re: Radius server not responding

Re: Radius server not responding

Re: Radius server not responding