MikroTik

engineertote

MT guys .. any response ?!!!

engineertote

i think its better to set RP filter to strict

Hello,

this is screenshot from core router, which have BGP peering with two upstreams provider.

Is this right? Thanks.

engineertote

very interested

MT guys ,, can you please update the post if you are going to add this feature or not ?

engineertote

exactly Mikrotik Guys please we need one real stable version in the year instead of releasing monthly non-stable testing versions since you start V6 and till now we never see any 100% stable version for years i'm sending to MT support asking to fix the queue issue that its can not limit high BW , an...

engineertote

do you think so :? Mikrotik Guys please we need one real stable version in the year instead of releasing monthly non-stable testing versions since you start V6 and till now we never see any 100% stable version for years i'm sending to MT support asking to fix the queue issue that its can not limit h...

engineertote

Mikrotik Guys please we need one real stable version in the year instead of releasing monthly non-stable testing versions since you start V6 and till now we never see any 100% stable version for years i'm sending to MT support asking to fix the queue issue that its can not limit high BW , and they j...

engineertote

normis .. thanks for your reply

i do already configured the point to point link but i'm talking about the power levels , data rate fine tunning to get the best results

now my signal is 42/42 but the ccq not going more than 40% , BW test is 100Mbps in Tx side and 150 Mbps in rx side ,, any advice

engineertote

Hello

i just got my first 2 new Netmetal 5 AC , and trying to configure the link .. i can not find any setup guide or symbols references .. any one can help in this .

Thanks

engineertote

We are working on it

good to hear

, any time plan ?

engineertote

do i need to block port scanner to stop that traffic ?

You never hear about port scanner?

engineertote

Hello

i'm tourch my traffic on the WAN interface of my router and i see many packets coming on SMB ports from out side , yes its small packets but its should be not seen on unsed IPs .

can any one explain this pls

Thanks

engineertote

i have tried this but its still same

If the packets are being spoofed changing IP -> Settings RP Filter to "strict" will help also. You can read more about that here:
http://wiki.mikrotik.com/wiki/Manual:IP/Settings

engineertote

yes i do ,but its millions of IPs sending small packets and its impossible to filter all of them .

engineertote

Hello my network is attacked by UDP flood :( :( we have facing problem that all our IPs " used and unused IPs " been attacked from out side by huge UDP traffic , the torch show millions of small UDP packets from many different IPs attacking our network , i have tried to disconnect all our ...

engineertote

atu , you can go for simple queue with V6 .

Regards
Ahmed

engineertote

any answers ??!!

engineertote

i want to divide the /23 into small subnets on address list and pools to put each 8 IPs under one limit so i'll have for example each 8 users " IPs" share xx kbps

engineertote

solved

engineertote

The Major problem is i have CCR as core router , 2 interfaces been bonding to carry traffic 1700 Mbps . the bonding interface can not pass more than 1000 Mbps " 500 Mbps each interface , means load balance working " . that's why i have checked from/to the router to make sure . i already ma...

engineertote

for sure i'm aware about this and i have checked the CPU already it was not more than 12% you can simply do BW test to the router from inside and see by urself :( If you have CCR, then you should have some knowledge about networking. You can't say just "is not working more than 1gbps". Det...

engineertote

NOTHING ???!!!

engineertote

Hello i'm testing in the LAB diffrent Mikrotik boards " CCR 1036 , CCR 1016 and X86 " , the test is to do bandwidth test inside the router Router IP : 10.0.0.1/30 and the BW test from inside the router to 10.0.0.1 , with UDP i can get up to 3Gbps but with TCP i can not get more than 1Gbps ...

engineertote

as per Mikrotik sales ,, CCR1036-8G-2S+ is ready and the price is great .. i have order 2 routers to test and see

engineertote

thanks for your post

actually i don't have it and plan to buy it .. may be i'll put 500$ to buy and test

thanks

engineertote

?????????????????

engineertote

Hello

Any one tried intel x520-sr2 10g pci-e with mikrotik x 86

Thanks

engineertote

asaleh75 thank you

Mikrotik .. any confirmation ??

engineertote

Hello Mikrotik

can you please confirm when you will produce CCR1036-8G-2S+ , it was planned for Jun then delayed to Aug .. i think its mod of Spt. now

engineertote

youtube can't be 100% cached , you can use squid cache

engineertote

As its looks from the new versions announcement , i believe that we have to wait more 6 months to get stable version ROS6 . is it possible to have stable version on ROS5 for CCR routers as we purchase them for long time now and not able to use on the production environment untill MT annonce an stabl...

engineertote

with PPP srerver , more than 400 active user the ping to DNS be non-stable even from inside the router .

engineertote

Does VLAN work on rc11?

yap its works just fine

engineertote

the route table reach around 700+ , the router behave up-normal and the latency be non-stable

engineertote

its work for me , but if i have diffident service level , any idea how to create script for each service level ? try this script foreach pppuser in=[/ppp active find ] do={ local ip [/ppp active get $pppuser address ] local name [/ppp active get $pppuser name] foreach queue in=[/queue simple find] d...

engineertote

RC09 , all ethernet not appear and can not access via winbox

/interface print command not responding

engineertote

in the download page there was RC08 few minutes back , now its RC07 only ??

engineertote

Something wrong with Simple queue ,, the limit not work correctly

engineertote

IP pool getting max /24 , even if we set bigger subnet on the pool /22 or /16 its releasing only 255 IP .

Regards

engineertote

100% agree same here Nope. Simple Queue bandwidth control is still not right. At home, capped myself at 14Mb burst with 4Mb sustained. Speedtest are around 9mb. This is really getting old. Yet, if I disable my queue, I get 24Mb. So the speed is there, its just that Mikrotik cannot control it properl...

engineertote

having problem with connecting PPPoe users , some users can not connect over PPPoe . we have run small test by changing the service name in the client PC to be as same as the service name in PPP server , the client can connect easily , but by default most clients can not connect . tested with X86 an...

engineertote

u like it hahaha

Thank you Janisk!

engineertote

sounds good , will be waiting

Janisk

Any plan to have 10G interface in future CCR ?

SFP+ modules will work in SFP brackets, but only at 1Gbit speeds.
We always move forward, and always work to include better technology in future products.

engineertote

i tried all RB models and also on X86 its still same issue ,, lets wait ROS V6 hope will fix the issue

Any progress on this issue ?
@engineertote: do you use other hardware ?

br
cm

engineertote

do we need to modify the lines in red ,,bellow code local ip [/ppp active get $pppuser address ] local tmp [/queue simple get $queue target-addresses ] if ($ip!=$tmp) do={queue simple add name= $name target-addresses= $ip max-limit=256k/512k try this script foreach pppuser in=[/ppp active find ] do=...

engineertote

Janisk

Any plan to have 10G interface in future CCR ?

SFP+ modules will work in SFP brackets, but only at 1Gbit speeds.

engineertote

Hello Mikrotik

Are you plane to introduce any 10G interfaces in the upcoming CCR series ?

Thanks

engineertote

RB 439 upgraded from 5.12 to 6.03 beta , router rebooting every 3 to 4 mins , CPU jumping to 100% for sometimes and back normal even with no load .

engineertote

+1

subscribe

engineertote

What's new in 5.18 (2012-Jun-21 17:20): *) wireless - do not use bridge and WDS mode on AP-AP links, causes loops; I'm a bit confused here...; is this a problem in previous version that now is solved? Or is the bridge and WDS funcion on AP-AP links causing loops and in 5.18 is therefore not recomme...

engineertote

Your current config is not going to improve ping times once they saturate their connection. i do understand that my config will not improve that , and even all other QOS standard and optimized config will not do , i believe it related to Mikrotik QOS standards , i think Queues need some big changes...

engineertote

yeah i edit this and its work thanks ,, /16 is very huge i reduced it to /23 and its still huge :) .. the theory is work but day by day i believe the megis QOS is really the best :) @engineertote It should be: new-packet-mark="U0_$y_$x" And why do you need such huge number of mangle rules?...

engineertote

its work ,, thank you from ipcal Address: 10.0.0.0 Netmask: 255.255.0.0 = 16 Wildcard: 0.0.255.255 Network: 10.0.0.0/16 Broadcast: 10.0.255.255 HostMin: 10.0.0.1 HostMax: 10.0.255.254 Hosts/Net: 65534 65535 rules for mangle is crazy but try this... for x from=1 to=254 do={ for y from=0 to=255 do={ /...

engineertote

Hi All i use the bellow sicript to add mangle rule for download and upload for each IP in the subnet , it was working well with the bellow format with /24 but now i want to do the subnet /16 , i tried to modifiy the script to work on /16 with no success ,, appreciate any help in this : First mark pa...

engineertote

i tried 5.12 and 5.16 ,, i believe that there is no difference ..

when u test it is is totall same just copy and past into the script and run the script ??

what version is runing in your routerboard??

paste in the terminal and read the output

I tested in 5.15 and work fine

engineertote

i tried it but its didn't add any simple queue when the ppp user logged in as active user try this script foreach pppuser in=[/ppp active find ] do={ local ip [/ppp active get $pppuser address ] local name [/ppp active get $pppuser name] foreach queue in=[/queue simple find] do={ local tmp [/queue s...

engineertote

Hi

i hope to see LLQ in the coming ROS6 .

Thanks

engineertote

[quote="Feklar"] If you need to control it, then you need to setup traffic control policies to control it. Such as giving them a monthly data cap that they are allowed to transfer through a given account, or charge them extra if they exceed a certain amount of traffic transferred. The nece...

engineertote

Hi All i'm trying to write script to add simple queue for each active user in PPP active with no success till now , the target is : i have 4 service levels each level have difrent up / down limit and the required sicript is to add new simple queue once the client be active on PPP active . Any help i...

engineertote

i'm talking on different scenario , what i'm doing is limit the users into classes , "Economy class , Standard Class , business and super "each user will get the rate "Speed" of the specific class , and the Total Queue in tree is unlimited so the priority u talk about will not wo...

engineertote

i'm testing on LAN network so nothing releated to the signal regarding to max speed per queue i didn't get you , can you pls more explain . It works for me. The only time I have a latency issue now is if I have poor signal somewhere. Have you adjusted the max speeds per queue to prevent the latency ...

engineertote

and still nothing

engineertote

nothing

engineertote

i have tried same QOS already , i even make firs 1 Mbyte go as free without limit but this is didn't fix the latency and poor performance problem.

engineertote

Still waiting Solution ??!!!

Mikrotik Support !!!

Notice: For support from Mikrotik staff, write to support@mikrotik.com - Mikrotik does not generally offer support on the forum, this is a user forum

ok ,, Mikrotik users

.. any one have same issue and found a solution ?

engineertote

Still waiting Solution ??!!!

Mikrotik Support !!!

engineertote

Hi Friends i believe that most Mikrotik users depend on Megis QOS in Managing the networks QOS but for months of testing and using Megis policy "that i found it the best choice " the users faced haigh latency when they download files or browse normal web sites like youtube , facebook .. et...

engineertote

i have fixed this issue : 1- Filter on Bridge and PPPoe is L2 you can use Bridge Filter that its deal with L2 2- Unmark PAP authontication in your PPP server config as its send the password as text to the user and this is will be easy to attack 3- try to use manage switch and isolat between ur clien...

engineertote

i do appreciate your following up but i think you didn't get my point .. first they are not use PCC with only one PPPoe Client in On router they connect PPPoe client on each interface for ex. RB450 Have 4 ports , they use 3 interfaces as PPPoe client in each interface with different users and they d...

engineertote

u r right ,, i'm still facing same issue ..

i have spent weeks of reading and searching with no success till now

Mikrotik support pls do something

engineertote

i do understand that the clients can use another routers from another vendors but in my country the most routers used for this Load Balance is Mikrotik . Regarding to the BW limit , even the current users using PPPoe client with PCC can only get the limit i configured in my QOS , but my problem that...

engineertote

Can't this be done in Script ,, the idea is "" if pppoe client trying to connect with MAC address from 00:0c:42:xx:xx:xx then go to interface -- bridge -- filter and block the pppoe discover

but the problem that i'm not familiar with scripts

engineertote

I can block only one MAC address but i'm looking to block range of MAC address from 00:0c:42:00:00:00 to 00:0C:42:FF:FF:FF .. is this possible ??

engineertote

If you are simply determined to block mikrotik PPPoE, why don't you try blocking at the MAC-ADDRESS level? This is what i'm trying with no success ,, Mikrotik MAC address range is from 00:0C:42:00:00:00 TO 00:0C:42:FF:FF:FF I'm trying to use bridge filter to block the all MAC range with no success ...

engineertote

Thanks ,, regarding to the QOS i correctly configured the queues for users , and regarding to the Bandwidth yes its congested and that's why i'm trying to prevent users with continous load from using PPPoe client and multi PC on them DHCP . And why only mikrotik because the people in my country only...

engineertote

i already did ,, and its ok only one connection but my problem is the user connect with only one user through PPPoe client and configure his LAN as DHCP and connect multi PCs to his DHCP server and this is will do continous load on the user .. what i want to do is to : either disable users with cont...

engineertote

If you watch the presentation, you will see that it will be ready to ship at the end of this summer (approximately). here is what you type in the presentation , nothing say about the availability of CCR :) CCR 1036 • 36 core networking CPU • 1.2GHz clock per core • Greater than 8 mpps standard forw...

engineertote

i Like CCR 1036 ,, is it ready to ship ??

engineertote

Hi i have PPPoe server providing home user services , the problem is that some people configure PPPoe client in Mikrotik and by using PCC load balance that can get more than one PPPoe client to be them WAN side and in the LAN side they configure PPPoe server and they are getting them full BW limit c...

engineertote

i saw in the web site that 5.12 been removed this mornning and back again just now ,, is there any modifications on the new package ??

with thanks

engineertote

Thanks man

it was 25 question in 60 min . mostly general question and case studies.

Congratulations! engineertote

How many test was in the exam? Was there any LAB on exam? What was the exam duration?

engineertote

5.8 is ok , but i see 5.7 is quit stable better than others specially with X86 ,

Mikrotik team ,, please we need stable version on X86 .. hope to see that in 5.13

thanks

5.8 is stable since weeks on my x86

br

engineertote

overall non-stability , sometimes the server hang up until we reboot it .
PPP users can not logging on with heavy use while with 5.7 they are easily access with same load .

thanks

engineertote

Hi

Mikrotik team please we need stable version with x86 because all packages starting from 5.7 is not stable with X86 ,

with thanks

engineertote

Would you like to share how it was # I mean was it just general questions regarding mikrotik networking, topics like chain,routing,firewall,queuing etc? the questions is mixed , general questions , Qeueue Tree BW distribution , DHCP cases , firewall questions ..etc. # at which location you gave the ...

engineertote

Thanks ,, i meant by sample exame is to have an idea about the questions .. Any way i have succesfully passed the exam today and got the certificate :D Thanks There is no example exam. The purpose of the exam is to test your knowledge, not to test if you can pass the exam by knowing what questions w...

engineertote

Tomorrow is my exam .. till now i can not find any sample exam !!!

any help is highly appreciated

with thanks

engineertote

Hi to all

Any one know link for sampl exam MTCTCE , as i have an exam and want to test my information before do the exam .

Regards

engineertote

78 view , no reply .

engineertote

wow ,, very nice !! 30 view and 0 post

engineertote

Hi to all i have two sides , Side A is my Server and Side B is my clients . Side A and B are connected via DWDM Fibre Network and its under same VLAN configured by the DWDM network , the Fibre network depend Cisco 2560 switch and its not support QinQ . My goal is to let the clients at side B to have...

engineertote

is there Any other way do same tunneling to send the PPP over it ?

If you are marking and queuing encapsulated traffic then yes, it will be one PCQ since source and destination is tunnel end addresses.

engineertote

18 view with no posts !!!!!

engineertote

Hi to All i'm using PPP server over EOIP interface with Megis QOS . There is small issue that all users under same EOIP interface be shared in the PCQ limit that its should go for each user in the normal case when we use normal PPP over Ethernet , here is my config <code> /interface eoip add arp=ena...

engineertote

i have upgrade my X86 from 5.7 to 5.11 but the problem that its keep hang up and stop running untill i reboot it , i have downgrade it to 5.7 and its back stable ,, please be noted to fix it in 5.12

Thanks

engineertote

Thanks

Read this excellent presentation done by Wardner Maia

Layer 2 Security - Attacks and Countermeasures using MikroTik RouterOS
http://mum.mikrotik.com/presentations/PL10/maia.pdf

I think that you can grab some ideas from there.

engineertote

Hi

i need a script to hide the MAC address of interface on the local side so the client will not see what is the MAC address of my Mikrotik as some attackers using sniper programs to know the MT Mac address and do virtual server on them PCs to attack the users .

Regards
Ahmed

engineertote

Thanks for all ,, Problem fixed

regards

engineertote

Fewi My network is : Mikrotik router ---- Cisco Switch --- Clients "My clients is not end users "only P2P links to resellers , from my side i do isolate them in my main switch so the users in port1 not see the users in port 2 also using EOIP tunnel for each P2P client with seperate PPP ser...

engineertote

Thanks for your reply , is EOIP solve this issue ?

engineertote

Dears i have problem with my PPP server , its easily attacked by using Sniffer program Like Cain&Abel and copy of mikrotik OS installed on Virtual machine on the attacker PC and they can see the username / password of the online users and then simply use it . i have upgrade the router to 5.7 and...

engineertote

but in my router i have enable the encryption and its still same ,,, the guys using cain&Abel can see my users and do them attack easily

engineertote

PPPoe encryption will fix the problem

Mustafa if you are " per user reseller " in IRAQ you can contact me and i'll be ready to help here is my no. 07902272267

Regards

engineertote

I love how MikroTik are improving on features like the Sniffer. The new filters are awesome.

Cheers.

can you tell me how u do sniffer filter pls ,, as i facing issue that my PPP server its been attacked by cain program that its using MAC sniffer.

Regards

engineertote

Thanks ,, i have DONE

engineertote

I'm fighting with this bit torrent for the past week but this bad torrent is win :( i have follow all ways to limit it with no success , , i just tried add action=drop chain=forward connection-limit=16,32 disabled=no dst-port=!53 protocol=udp and did small test with bit torrent and its getting much ...

engineertote

Hi dears

We have managing wireless and fibre network based on Mikrotik routers , we have registered our IPs and AS and need to implement BGP on our core router and advertise the prefix , i have static route between my network and my provider , any idea how to start ?

Regards

engineertote

hel , i have faced same issue with my routers , buts its goes bit better with 5.6 SW , try to upgrade and see Regards You need something called Low Latency Queuing. That is not yet implemented in Mikrotik. I need that too. That make sense. I've now searched "Low Latency Queuing" on this fo...

engineertote

Hi to all

i have two ISPs and need to use the uplink from ISP1 and downlink from ISP2 , i have search in wike but didn't found anything helpful.

i do appreciate if any one past me any weki example or advice how to do the above config.

Regards

engineertote

Great ,,, its perfectly work now ..

Thank you million time for your kind help .

Regards

engineertote

Thanks for your kind help ,, but still i can not success in this even after upgrade to 5.1 and put the script in two seperated lines , can you please do me favor and post the final working config for the script , scedular , clock and queue Tree .

i do appreciate your kind support .

Regards

engineertote

Hi

its accept it

[ahmed@MikroTik] > /queue tree enable "day"
[ahmed@MikroTik] >

and i tried disable it and enable it trough /queue tree disable "day" and /queue tree enable "day" and both is working on queue disable and enabling.

Regards
Ahmed

engineertote

ditonet , thanks for your effort but still the qeueue tree not take the changes ,, i see the run count in both script and scedular working fine but its not reflected to the qeueue tree .

Regards
Ahmed

engineertote

Now the script and the scedular working but its not disable or enable the Day / night queue Tree

engineertote

Still waiting any post helpout in this issue ...

engineertote

i have fool question

RB1100 i can not see it in the RB series selections in the download page ,, can i use same 1000 series ?

engineertote

Hi

thanks for post , here is the results of clock

[ahmed@MikroTik] > /system clock print
time: 12:22:08
date: apr/10/2011
time-zone-name: manual
gmt-offset: +00:00

engineertote

Dear All i have using some routers in my network each one managing some clients , some routers are RB433 and some 1000 and 1100 , with same configuration on all routers i see when the end user put download the ping to the Gateway and DNS been very high and sometimes disconnected in same time with sa...

engineertote

its 10 days since i post my issue .. till now no answers ..

Answer me and get Karma

engineertote

Hi i have tested limit dffrent traffic in day and night with simple Queue and its worked perfectly , now i'm using another way of BW management using Firewall--Mangle -- Mark Packets and using Queue tree to limits . the problem that with Queue tree the scadular not working , its show me that its act...

engineertote

Thanks Normise , is it give better performance than RB1000 with my case ?

engineertote

Hi

i saw in Adv. there is company produce Power Router 732 based on Mikrotik , can you please advice if some one test it , i have network with 20 Mbps BW and using RB1000 , if this power router 732 can do better than RB1000 please advice .

Regards

engineertote

Many thanks .. its ok now

engineertote

Hi all i have two WAN with1 LAN using PCC load Balance with per connection calssication . The ping to DNS and to any other web site sometimes coming from WAN1 and sometimes comming from WAN2 .. same for normal internet traffic . i want to keep the claissification of internet traffic as it is .. but ...

engineertote

Thanks for your feedback ,, here is my magle configuration can you please explain bit more if i need to add some more rules on it if i increase the pcc streams : / ip firewall mangle add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn add chain=input in-interface=W...

engineertote

Hi to All i have two gateways first is Fiber and the other is VSAT .. i have using PCC load Balance with RB1000 v.4.5 and its working very fine , i only have two issues : 1- Currently the LAN bandwidth is devided on both gatways " WAN1 & wan2 " equally , for exampl if the traffic show ...

engineertote

in Radius Manager under add new NAS section be sure that the IP you put your NAS " Mikrotik IP " and the secret is same of the defaulte secret " testing123 " in Mikrotik config: 1- Radius -- add new --- set the RM IP there and the same secret testing123 2- select what service you...

engineertote

Hi ,, reload the test UM 4.6 from here http://forum.mikrotik.com/viewtopic.php?f=10&t=35718 , this is will solve the time increase problem after reboot but its will not disconnect the expired users until they log out by themselves then when they try to log in again the UM will not allow them . R...

engineertote

i think its will be very hard to do like this with large network as its will be not easy to monitor and checking , centralizing is the solution as you can be sure that your network protected and the BW shaping is in safe place .. also it will be easy to monitor and BW modifications Thanks For a inte...

engineertote

Thanks .. i have read many examples and guides and now i'm doing well with QOS and its really improved my internet service .. Many thanks for Mikrotik The best why to learn is to read, and explore the many facilities of RouterOS. But to get you on track, make "lab" testing area. take you r...

engineertote

Hi dear Thanks for posting ,, i have contacted Mikrotik support and they informed that the issue with the old package of UM itself .. you can try it same procedure u post and see the time left for any user u add ,, then try to turn off and then turn on your Routerboard where the UM is installed u wi...

engineertote

Steaaange :roll: ,,, more than three days i post my problem and till now no answer !!!! please any advice ? is this bug in UM or i have something wrong in configuration ? can i do this job with MT UM or i have to sue another Radius server ... pleeeeeeeeeeeease help as its very urgent and important ...

engineertote

Hi all i have problem with the usermanager prepaid users , when i add new credit with specific period its working normally as it should be , but if i turn off and on my user manager Router Board , the prepaid users having anoother extra Time in the time left !! how is this ? i read all the wiki and ...

engineertote

Sergejes I have config same in the wiki page and it was working perfectly , i just have problem when i restart " Turn powerd off and on again " the RB device that its have UM installed .. the users who don't have valid credit able to loging again with extra period ? please help ASAP pant, ...

engineertote

Now i have every thing working fine when i set limit time in the credit its working fine .. Any user expired can not log in again and this is good ,,, the bad point here is if the user manager powered off and on again .. the expired users can log in again and its show new time period for them . plea...

engineertote

hi

its 4.6 with license L6 .

Regards

engineertote

i have tried these points : 1- add user with up time xx for exampl 10 mins " 00:10:00 " when i access with this user after 10 mins its disconnected but if i logged out before the 10 mins up and logged in again its start again accounting for another 10 mins 2- add batch and limit the up tim...

engineertote

Hi all i have RB1000 with L6 lic. , i'm using PPPOE with usermanager for controling my customers . when i add new users via usermanager its working very fine but if i add uptime its not working and failed to logging on .. the question is how can i generate username and passwords with time limit 1 Mo...

engineertote

can u post it as terminal comands so we can try them .. thanks One simple option: PPPoE and Hotspot both use simple queues to limit users. Simple queues are overridden by queue trees attached to global-in and global-out. Between 11pm and midnight and midnight and 8am mark all packets as 'unlimited' ...

engineertote

whats up ??!!! 21 views till now with no at leats one post

!!!!!!!!!!

engineertote

Hi all i have two networks with to RBs first is RB1000 and the other is RB800 , with the RB1000 i have set Hot spot and the RB800 pppoe . i need to give customers in both networks free download with out any limit out of the rush hours .. for example : from 08:00 am to 11:00 pm they will have limited...

engineertote

Hi all I would like to thanks Mikrotik for this forum and thanks all person who tried to help in posts and replays , finally i got the problem and now the link working very fine with good sgnial , the problem was with the R52H that i was use it i just replaced it and now every thng normally . Thanks...

engineertote

Hi is the big diffrence between the two signals means hardware issue at one of the sides ? As i told you before, you have a hardware problem. And your signals are not the same...so you have a problem with 1 side of the link. Check antennas, Cables and cards (change them! ). Nothing wrong with elevat...

engineertote

with 900 meter ,, the AP was on hieght 15 Meter from the ground and the Client on 10 Meter from the ground now for 6.5 Km the AP on 21 Meter and the clinte on 20 Meter is there something i have to do with the elevation ? as my direction is 100% right if u r getting -67/80 at 900 mtr on such antenna ...

engineertote

Signal Streanght was -67/-80 with 900 meter

what signal are you getting at 900m?

engineertote

hi .. i have sent u both IPs for remote access on bt.ang@mykris.net and cc to vincent_angbt@hotmail.com i do appreciate your kind support If you able to let us remote login, it will help you very fast. Thanks ,, can i send u the access details via email as the forum is public . Thanks as you plan

engineertote

If you able to let us remote login, it will help you very fast.

Thanks ,, can i send u the access details via email as the forum is public .

Thanks

engineertote

its only 30 cm .

what is the length of the pigtail cable from the radio to the antenna?

engineertote

its same ,, i have test it with shorter link only 900 Meter .. same configuration and it was working fine . i just make the flatpanel hiegher at the AP and install the other side then i didn't able to lock the p2p link IF WDS bridge is enabled check for wds mode and the frequency channel u hav selec...

engineertote

Thanks ,, yes the WDS-BRIDGE is enabled at both ends .

Have u enable WDS/Bridge in ur AP. Perhaps ur client end has WDS enabled but AP end is not. If LOS is clear there should not be any issue.

engineertote

brb .. i think its clear .. the wds-station keep searching but its not find the ap-bridge from the other end to be connected .

"but the problem that i can not have lock" WHAT?? Be more specific!

engineertote

Hi all I need to establesh point to point wireless link with 6.5 Km in Baghdad/IRAQ , in both ends i have RB433 , R52H and Mikrotik Flat panel 20 db , my configuration is transparent bridged like this exampl in wiki : http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks i have two towers ...

engineertote

Thanks ,, i did and its succefully upgraded .

if that a Folder I see?

RouterOS doesn't support folders

upload all NPK files to the root level of the file tree.

engineertote

Hi i did through system--reboot ,, i also after that when its not upgraded turn it power off and on and both are same .. but the package i download it is " All packages " not the combined packages .. is this affect ? Regards Did you reboot with 'system reboot' or just remove power and powe...

engineertote

Hi all i have RB800 need to upgrade it from OS4.2 to 4.5 .. i have downloaded the new packages from Mikrotik web site and past it in the file list via winbox and then reboot the RB800 ,, the new packages now uploaded to the file list but the OS still show 4.2 , bellow the results : [admin@MikroTik] ...

engineertote

Hi i have two RB first is 433 and the other is 600 .both have the following problems : 1- RB433 , i have upgrade OS from 3.25 to 4.5 , after reboot the board its never back up and i have the following results in hypertermnal : RouterBOOT booter 2.23 RouterBoard 433 CPU frequency: 300 MHz Memory size...

engineertote

Hi ,, how to reload ,, i faced a problem that its not find the kernal and not start the service .. i have format the nand and now its show the folloing : RouterBOOT booter 2.23 RouterBoard 433 CPU frequency: 300 MHz Memory size: 64 MB Press any key within 2 seconds to enter setup.. kernel not found ...

engineertote

Can any one please post the config here so it will help me and help others have same issue ..

i need to know how physically it will be .. shall i need to assign IP address from the rb433 or how ?

any post is welcom

engineertote

thanks

engineertote

Hi

Can i use two RB1000 work as Active/Failover , so if the main RB1000 face any problem or get faulty .. all the information will be move the the back up one ..

Any advice is highly appreciated

Regards

engineertote

Hi i need to set diffrent BW for users if i use Hot Spot or PPPoe , for exampl from 08:00 am untill 11:00 pm i have heavy traffic on my network so each user will have 42 kbps upload and 104 kbps download , but after 11:00 pm and untill next mornning i don't have heavy traffic so i want the users to ...

engineertote

Hi Thanks ,, can you please send me in details how i can configure the usermanager as i'm not have good experiance in it Hi For starter you can use the usermanager package for your router. But if you like more advanced options you need an external radius server and a software for admin of it. I'm us...

engineertote

Hi How can i provide prepaid cards for my customers , i'm using RB1000 with v4 OS . i need to provide for exampl 100 hrs pre paid card with 512 kbps/128 kbps and some other limites and rates . also if i need to make time limit for exampl the 100 HRS have limit 1 or 2 months and after this the card w...

engineertote

Hi ,, we have wireless network providing point to point internet service , our main controller is RB1000 with v4 OS . for the point to point links i'm using RB433 as transparent bridge in both sides how i can limit the BW for my customers , i.e. one of my customers need 1 Mbps downlink / 256 Uplink ...

engineertote

Hi ,,

We normally in hotspot setting give username and password for the generate new users and make billing ..

We need to generate username and passwords for VOIP service .. and make it work as VOIP billing systems . is that possibule with mikrotik ?

Thanks

engineertote

is there any other way to cache youtube or metacafe ?

some of these video servers are designed differently

engineertote

Thanks for quiq replay ,, but why other vedios cached very well ? is it only youtube and metacafe can't cached ? why ?

Thanks

you can't cache youtube.

engineertote

Hi all I have set and configured web proxy in my Mikrotik and its doing great ,, browsing , downloads and Videos are saved in the server and its all cached .. I have only one problem ,, vedios in youtube and metacafe not caching .. i'v tried another videos in another web sites and all working very w...

engineertote

hehe ,, whats up man .. you write all of this

.

engineertote

Dear All ,, I have RB433AH connected to my wan side " VSAT " and the Line side is 30 PC .. i want to enable the web brwosing chach in the mikrotik so if one of the users request for www.yahoo.com it will be saved in the cach and when the other PC requested same page he will get it very fas...

engineertote

Hi ,, First upgrade your OS ,, Second follow the commands " use the consol commands " in both ended and you will get it work , the exampl will work 100% i have tried it here and its working fine . Regards I have te same problem cant get a connection how do you solve the problem regards mic...

engineertote

My dear .. The Distance is 22 Km and i have 45 Mb full duplex , what i need to know is : 1- is the needs only 2 RB433AH , Antenna 20 dbi and R52H on the two nodes only or i need to put more repeaters in the line of sight ? 2- is using one RB433AH enough to carry 45 Mb full duplex or i have to share ...

engineertote

Dears .. I have the following hardware : 2 RB433AH , 2 R52H and 2 antenna 20 dbi . i have configure it as point to point transperent bridge .. can i know whats the maximam distance i can do it with this point to point link to geive best performance , lowest latency and maximam bandwidth transfer . y...

engineertote

Stefan ,, Thanks for your kind advice boss .. i just have small issue ,, when i make it on turbo mode i lost the connection and i was not able to reconnect again untill i back it to the 5 Ghz with freq. 5805 , is there any specific changes i have to do it when i change to turbo mode ?? Stefan ,, the...

engineertote

Thanks ,, Can you please advice how to do this configuration ? Have you turnetd nstreme and framing on? Can you use turbo channel? For latency problem, do the shaping, better with external device. Lets say your links max is 20 Mbit/s If you do bw test's you will see something like this 1 mbps - 1 ms...

engineertote

Stefan ,, the max speed i get is 20 Mbit .. how can i reach the 65 Mbit ? is there any specific configuration . My current coniguration is like this example : http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks Thanks You never see more than ~65MBit Aggregated using one Card/Antenna per ...

engineertote

Dear All ,, I need to transfer 45 Mb full duplex on point to point link using RB433AH for distance 20 Km .. I have 2 RB433AH , 2 R52H and 2 flat penal antenna " 20 dbi and/or 29 dbi " i made a test for shorter distance and lower bandwidth transfer .. its made 20 Mb file transfer speed and ...

engineertote

Dear All ,, I need to carry 45 Mb full duplex on point to point link with distance 20 Km using Transperent bridge with 2 RB433AH , 2 R52H and 2 flat penals " i have 20 dbi and 29 dpi " .. i configure the point to point link with transperent bridge " bridge to wds-station " and it...

Search found 177 matches