MikroTik

ejmerkel

I have submitted a ticket to support. I can report that I have two other x86 units that were upgraded from 5.1 to 5.2 and SNMP seems to be working. However the ones that were upgraded from 5.0rc7 to 5.2 directly seem to be having the issue. Perhaps the configuration got corrupted during the upgrade?...

ejmerkel

After upgrading 4 PC x86 boxes from 5.0rc7 to ROS 5.2, I noticed my cacti graphs stopped working. I checked and rechecked all my SNMP settings and also notice I am no longer able to snmpwalk these devices. Below is the log output from one of the boxes when I try to snmpwalk it. Basically "snmpw...

ejmerkel

Has anyone got this working yet between an MT and a Cisco using OSPF as the IGP?

I can get both sides to ping using the /31 subnet mask and even get an adjacency formed but it doesn't seem to want to exchange routes.

Eric

ejmerkel

I am fairly new to the Dude and was if it is possible and how to do the following? I have some devices which I can read the association list Mac address, RSSI, Tx Rate, Rx Rate etc via SNMP. I would like to be able to pull and display that information in the dude. The only way I can think to do this...

ejmerkel

Thanks for the advice. Not sure why I didn't think of doing it this way. I ended up adding three networks and then linking each of the ports on the routers into the three subnets from both sides.

ejmerkel

I have two routers which have 3 wireless point to point links between them. The three links are load balanced via OSPF. If I try to add more than one link between the routers in the Dude, I get "no more than one link between same elements" error. Is there a away to get around this issue so...

ejmerkel

I understand but I have 100's of devices already programmed the "old way."

ejmerkel

We have ssh firewalled off to anything but our management IP's so for us, this really isn't necessary. Is there any consideration for making this an option vs an all or nothing approach?

Eric

ejmerkel

Seriously this has changed in v5? We import ssh keys for our backend systems to be able to automate certain tasks but if I have a tech in the field, I'd like them to be able to login via username/password directly as well.

Can this behavior be changed? I assume not...

Eric

ejmerkel

Just noticed on a couple of routers running v5.0rc5 that once an SSH key is imported for the user admin, you can no longer SSH into the router via admin and authenticate via password. I can SSH in via key authentication without an issue. If I remove the SSH keys, I can once again login via username ...

ejmerkel

I intend on setting up a DHCP and PPPoE server on the same ethernet interface to service two different sets of users. Can DHCP and PPPoE both share a single IP address pool or will they need to be separate? For management purposes I'd like to have just one pool.

Eric

ejmerkel

Is it documented somewhere exactly what radius attributes the MT DHCP server does NOT support?

Eric

ejmerkel

Thanks that did the trick!

Eric

ejmerkel

I have 2 MT routers running 4.10. Each has a separate external BGP connection. The two routers are also meshed together via iBGP. Both routers are receiving a default route from their eBGP peers as well as other specific routes. However, during my testing if I shut down one of the eBGP peers, that r...

ejmerkel

maybe something like attr_rewrite my_super_parser { attribute = User-Name searchin = packet searchfor = "^00:BE:EF:.*$" replacewith = "00:BE:EF" ignore_case = no new_attribute = no max_matches = 1 append = no } in "modules" block, then add that module in "authoriz...

ejmerkel

I am using Freeradius. Does it support wildcard macs? Time to do some digging.

ejmerkel

Just to clarify your post, does the MAC listed in radius have to be specific or can it be done thru a wildcard entry somehow like 0a:00:3e:*:*:*?

ejmerkel

Is there a way to copy the script source from a file that's been ftp'd or scp'd to device into the script scheduler? I have a large number of devices I want to copy a script to and then schedule to run. Is my only option to use /sys script add name=test source="SOME HUGE AMOUNT OF TEXT" Eric

ejmerkel

The way I have scripted uploading a default config is to use a couple of programs that come with putty. PSCP allows you to copy up backups or ROS images etc to the MT device. Then I use PLINK which allows you to login and run commands either individually or give PLINK a text file with MT commands. M...

ejmerkel

Makes sense. Thanks for clarifying that!

ejmerkel

I assumed it needed internet access because when I do the updates via winbox it resolves the mikrotik.com site and pulls the new license. How is this done offline?

ejmerkel

I am batch programming a bunch of 411's and upgrading them from 3.x to 4.x during the process. After the unit reboots, it will automatically connect to the Internet. My question is, is there a way to automate the license update from 3.x to 4.x via the command line without logging into Winbox? Thanks...

ejmerkel

Do you have to reload the entire unit via netinstall to do this? I was thinking more of just scripting the upload of a configuration or backup.

ejmerkel

We are planning on using some RB/411's as a wireless customer premise equipment. Basically we will have some people assembling the units into a Rootenna that are not MT saavy. That being said what is the best way load a default configuration on the unit that sets up IP addresses, DHCP, NAT, DNS, and...

ejmerkel

Ok, I think I got this working correctly. Anyone see any problems with how this is setup? /ip firewall mangle add action=mark-connection chain=prerouting comment=\ "Mark Surfer_Basic client Upload traffic" disabled=no in-interface=\ bridge1 new-connection-mark=Surfer_Basic_Upload_conn pass...

ejmerkel

Ok, I will give that try and see how it goes.

Thank you!

ejmerkel

I have an MT router (v4.5) that has 3 interfaces. Ether1/Wlan1 (bridge1), ether2 (point to point backhaul to core network), ether3 (point to point backhaul to core network). Bridge1 is the where the customers connections are made ether thru the wireless or ethernet port. All of the customers have RE...

ejmerkel

Is exporting the same as saving? Or when you leave the dude does it do a save?

ejmerkel

Ditto.... I am a fairly new dude user. I love it so far, however I put about three days worth of work on maps, devices, etc and today someone rebooted the server to load some patches and nearly everything was gone. Am I to assume to save your work you just need to do an export or is there another wa...

ejmerkel

Has anyone gotten RANCID (http://www.shrubbery.net/rancid/) to work with Mikrotik Routers? It looks like someone has attempted this (http://www.gossamer-threads.com/lists/rancid/users/3826) but I've not had any luck getting his patch to work. If anyone has this working, please let me know. I could u...

ejmerkel

Thanks that worked like a charm. Can you clarify for me if the behavior between X86 and RB493AH is different?

ejmerkel

Yes, you have to set disable-running-check=no for OSPF to in that manner. disable-running-check is only available via CLI. I don't have RB493Ah but I am running ROS ver. 3.24 on X86 and disable-running-check=no is available. Is it possibly available on X86 but not on RB493AH? Here is the output of ...

ejmerkel

I am new to MT and am curious how to get my MT box to act in the following manner. I have 2 point to point links (ether1 & ether2) that are running OSPF and are connected into a Cisco router. I am then redistributing the connected routes into OSPF so the the LAN's IP subnet(ether3) is announced ...

Search found 33 matches

Re: SNMP problem after 5.2 upgrade

SNMP problem after 5.2 upgrade

Re: Point-to-point (/31) addresses

Way to Display Association List

Re: no more than one link between same elements

no more than one link between same elements

Re: SSH issue on v5.0rc5

Re: SSH issue on v5.0rc5

Re: SSH issue on v5.0rc5

SSH issue on v5.0rc5

DHCP & PPPoE IP Pools

Re: Framed-Route in v4.11

Re: iBGP peer not seeing default route

iBGP peer not seeing default route

Re: DHCP use Wildcard MAC to select pool?

Re: DHCP use Wildcard MAC to select pool?

Re: DHCP use Wildcard MAC to select pool?

Copy script source into scheduler

Re: Programming Generic Default Configs

Re: Command line update 3.x key to 4.x key

Re: Command line update 3.x key to 4.x key

Command line update 3.x key to 4.x key

Re: Programming Generic Default Configs

Programming Generic Default Configs

Re: Queue Tree Parent with PCQ

Re: Queue Tree Parent with PCQ

Queue Tree Parent with PCQ

Re: Saving Config

Re: Saving Config

RANCID Config Backup

Re: OSPF redistributed connected route removal

Re: OSPF redistributed connected route removal

OSPF redistributed connected route removal