MikroTik

mk0000

Hello,

i have 3 WAN-Accounts connected to my Routerboard.
All accounts are divided among the 3 WAN access.

Can I call an external page via Mikrotik script to determine which IP address just to what account is WAN? Or what options do I have then?

Many regards,
Michael

mk0000

Where can help?
I have increase the hw-retries to 15 but the same problem.
I have set the Signal in the Connect-List but the same problem.
The Log-Failure came with NV2 too.

Anyone Ideas?

mk0000

Hi, i have the same problem, but the Connect List is empty. What can i do? The Failure-Log: 20:42:06 wireless,info 00:0C:42:FE:26:6F@wlan1-gateway: lost connection, not polle d for too long 20:42:10 wireless,debug wlan1-gateway: must select network 20:42:10 wireless,debug 00:0C:42:39:9D:55: on 5320 ...

mk0000

Hello omrob, thank you for your reply.
I have reinstall and reconfig the Omnitik but the same Problem.
I have on ether1 now only the PoE. For the Data i have a new Cable on Ether3 and there is no Problem!
I find that there is a construction-failure with the ether1 and the PoE!

mk0000

Hi @ all! We have the following probem: We have a SXT and a Omnitik. The SXT is connected with a LAN-Cable with the PoE. The Omnitik too! The PoE-LAN is connected with the other PoE-LAN. We have renew the cable and the PoE but the problem is the same: apr/05 13:31:09 interface,info ether1 link down ...

mk0000

I have upgraded, but the same problem. I have another link with 5.12, nstreme and 6,5 km distance with 90% CCQ.
Have the Antennas (SXT's) a problem?

mk0000

Hi Everybody,

i have a link with two SXT's but i have a very weak TX-Signal.
I use nstreme with the best results. NV2 broken down.

What can i do?
With other Frequencies the rest doesnt better.

mk0000

I have disable these two Mangle's and will test it or can i sort the Mangle's ?

mk0000

I have test it with 5 Clients. One Clients goes over the second Gateway all other over the first Gateway. The Mangle-Entries count up but nothing over the second Gateway. Is there a special Entrie or other things i have disremember? The Config IP-Address # ADDRESS NETWORK INTERFACE 0 192.168.0.5/24 ...

mk0000

Yes, but the traffic goes over 192.168.0.1.

mk0000

The same Problem

mk0000

passthorugh is activated but the traffic goes over 192.168.0.1 and not over 192.168.0.2

Help?!

mk0000

Example?

mk0000

hello cybercoder,

the firewall on the brigde is enable.
When i change pre-routing to forward, it come a error-message:
Couldn't change Mangle Rule - routing-mark allowed only in output and prerouting chains.

mk0000

Hi rodolfo, my configuration from the RB 450G: /ip address # ADDRESS NETWORK INTERFACE 0 192.168.0.5/24 192.168.0.0 bridge1 /ip firewall mangle 0 chain=prerouting action=mark-packet new-packet-mark=connection passthrough=yes protocol=tcp 1 chain=prerouting action=mark-packet new-packet-mark=conn pas...

mk0000

Hi, i have a problem with the following Problem: One RB 450G (IP: 192.168.0.5) with 100 PC's and 2 WAN-Ports (Port1 and Port4). On Port1 there is a Fritzbox (192.168.0.1) and on Port4 there is a Fritzbox (192.168.0.2) Alle LAN-Ports from the RB 450G are a bridge. All PC's from the other LAN-Ports ha...

mk0000

Hi Normis,

have you a date for the new SXT Version?

mk0000

Okay, I will test it....

One Question About this Network-Diagram...

If the Web proxy would stay away, the total traffic of 64 Mbps would be about over one RB 450G with connection tracking, is this possible?
Or even why I need two single RB 450G?

mk0000

hmmm
So I need another router in front of the device which then takes over the web proxy?

mk0000

The attached file shows my network diagram. I have many Clients for GroupA and GroupB. For the allocation of IP addresses assigned to individual groups, it can later be moved based on the traffic of one or the other yet. On the Mikrotik router 2 WAN run together and the traffic must pass through the...

mk0000

Have every one an idea? I have test it withe the Rules you can see in my last Post but it doesn't work.

mk0000

Hello fewi, can you post a example? I have test it with, but it doesn't work: /ip firewall mangle add action=mark-routing chain=prerouting disabled=no new-routing-mark=GroupA \ passthrough=yes src-address=192.168.88.22 add action=mark-routing chain=output disabled=no new-routing-mark=GroupA \ passth...

mk0000

This works, but the traffic goes over the first route....
I will separating the traffic over the 2 WAN-Ports and this must work with the web-proxy too.
Or is that no way?

mk0000

Hello, i have use the following Sites http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways http://wiki.mikrotik.com/wiki/Pppoe_server_with_profiles for Multiple Gateways and the PPPoE-Server functionally fine. http://wiki.mikrotik.com/wiki/How_to_make_transparent_web_proxy But when i ...

mk0000

Hello Everybody, i have the Network which you can see as the Attachment. I have the Problem that i don't know how I transpose the problem in the Mikrotik board. Can you help me? My beginnings are the follow: 3 DHCP-Server-Pools 3-DHCP-Server (Ether2, Ether3, Ether4) My Network-Configuration Ether1: ...

mk0000

Have no one an idea?
Have a 450G a higher connectens tracking speed or which configuration can i edit that i have full speed and the connection tracking?

mk0000

Hello,
i have a RB450 with active connection-Tracking.
I have 32Mbit at the beginning and the RB450 stop it by 15Mbit.
What can i do that i have the connection-tracking and the full speed at the end?

Edit:
Wenn i disable the connection-tracking then i have 32Mbit but i need the connection-tracking.

mk0000

Thank you for your answer.
I have all default settings.
How could it be?
I usually redirect nothing more ....

mk0000

I have the same problem but i will use a transparent hotspot. The user doesnt log into the hotpsot.
What can I do? (http://forum.mikrotik.com/viewtopic.php?f=2&t=34336)

mk0000

Thanks for the instructions. - Show unique surfing I will show this site for every site the user is call... Because: www.google.de -> my Site was show, www.ebay.de -> my Site was show and so on... With regard to the hotspot, however, came on errors but .... I do not get some pages are rendered, but ...

mk0000

Thanks for the instructions.
It runs at best.
One question I have, but still ... if I now create a page in the hotspot folder, how can this
- Show unique surfing
- Always show while surfing
Thank you in advance.

Best regards,
Michael

mk0000

Thank you for your answer.
I intend to try, if maintenance work is carried out on the net, I can use the pictures from the router board.
Since the html file can be read it was so close that it can also load images.
How do I create a transparent hotspot in connection with the Web proxy?

mk0000

I have a problem with images and css files. How can i write the image and css file in the error.html? Because this dont work: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <meta http-equiv="Content-Type&q...

mk0000

Do you want to log into it with your changed html? if not, you could disable that page and have a firewall rule to re-direct you to another page that you make. Many thanks for the answer. How would the fire wall rule have to look if I, e.g., on test.html site with appeal of my Interfaceip (e.g., 19...

mk0000

I can deactivate this side is clear to me. Only I would like to generate with pleasure another, own HTML page and indicate this by the call of the IP address. Is this not possible thus?

mk0000

..., I guess you can send it with a script...

Yesterday I have already found after a Script in request, however, nothing... Which Script can always send log.1.txt when log.0.txt a newer time stamp has? I would be to you very thankfully for the Script.

mk0000

This is right, however, this side I do not need, hence, I would have with pleasure another side.... Hence, also the question whether one can change this around with the Web-Proxy later only the IP to be able to brag.... Because HTML pages cannot be given with the Webproxy by own device...

mk0000

The picture shows the standard start side of the Mikrotiks. Is it to be changed possibly this?

mk0000

I have placed in the simple queue for the given IP address in max. limit in the Up and download. Now, however, in the Traffic one sees this the download value well over 200K comes, partially even up to 1M. How is this possible or what I must change is finished with it really with the eingebenen valu...

mk0000

Is it not to be given possibly instead of a website a HTML page by the Routerboard?

mk0000

Is it possible about the Web-Proxy to fix own side (then in the HDD memory of the RB450) it is loaded if we want it? (As a kind of servicing work side) What would have to be configured like?

mk0000

The Logging well functions, only it is possible there only to get the called Websiten and not Javascript files and other single pictures?

mk0000

Many thanks for the quick help. How does it look with the email dispatch?

mk0000

I have found my Bug, now I get the web-proxy debug error messages .... is it possible this to send via email?

And if so, can this only be about 100 messages and then packed to be sent?

mk0000

hmm, My structure of Wlan Network: start point -> intermediate point -> endpoint At the endpoint, several clients connected via WLAN, and at the starting point is running on a 450er my WebProxy. The 450er is now also enabled logging just does not seem entries. What should I therefore have to change?...

mk0000

Thanks for the quick reply.
Unfortunately these logs to me but usually only the pages from the Web proxy blocked? and not the user invoking?

mk0000

Hi,
how can I log what Internet-page the user (from the Access List) has called.

Thanks in advance

mk0000

Hello, I am new in the Mikrotik Area and I have some questions about the Wireless AP. I have setting the AP and they work wonderful but how can i set the Bandwoth for every User ( the speed is different for each). I have found that the User musst stand in the Access List with their MAC so it can't n...

Search found 48 matches