MikroTik

clarkstyx

thanks!

clarkstyx

Hi,

Can the Mikrotik RB1100 AH be used as WLAN controller? If yes, which AP's are supported? Are 3rd party AP supported? If yes, can you please post the link for instructions? Thanks.

clarkstyx

anyone?

clarkstyx

I have 6 pppoe connections and I was able to configure all of them in RB2011il. The main goal is to combine some Pppoe connection and distribute it to multiple lans (4 LANS). pppoe1 = 100mbps pppoe2 = 100mbps pppoe3 = 40mbps pppoe4 = 40mbps pppoe5 = 40mbps pppoe6 = 40mbps pppoe1 + pppoe 2 = 200mbps ...

clarkstyx

chain=dstnat action=dst-nat to-addresses=83.111.xxx.xxa to-ports=8200
protocol=udp dst-address=83.xxx.xxx.xx dst-port=8200
probably you want protocol=tcp
my guess ports 8100 and 8200 are firewalled in servers.

yeah , i tried doing tcp also but Im getting the same problem..

clarkstyx

Hey guys, I have three servers. The first server, I can access it remotely thru RDP and port forwarding thru port 3389. The second server, i changed the RDP port to 8100 and the third one is 8200. With these two servers even with the proper dst-nat configuration , I am unable to remote access the 2 ...

clarkstyx

Hi there, I have RB433 with v4.12 but the script in wiki seems to be not working,below is the script I used. # Define User Variables :global ddnsuser "DYNDNSUSER" :global ddnspass "DYNDNSPASS" :global ddnshost "DYNDNSHOST" # Define Global Variables :global ddnsip :globa...

clarkstyx

is there anyway that the counter will stop as soon as the customer logs out? I dont see the purpose of logging out if time continues running.

clarkstyx

I don't think it matters which vpn you want to use with a dynamic dns. You just need a script, that regularly checks if the remote dynamic ip has changed, and then edits the config. If you want, I can post my script for openvpn. sure can you post it please? right now im using change-ip as my dynami...

clarkstyx

guys,can anyone tell me which among the types of vpn will work best with dynamic dns or can be used to setup dynamic to dynamic vpn, thank you

clarkstyx

thanks, I also tried disabling ssh and made my password a lot stronger..

clarkstyx

guys ,im getting this recently 11:09:30 system,error,critical login failure for user tokend from 121.15.171.5 5 via ssh 11:09:37 system,error,critical login failure for user windowserver from 121.15 .171.55 via ssh 11:09:43 system,error,critical login failure for user appowner from 121.15.171 .55 vi...

clarkstyx

try connecting RB over serial cable and follow instructions at http://gregsowell.com/?p=298

clarkstyx

please check mikrotiks hard disk, it might be reaching its limit already, i had the same problem,i had to remove dude and it freed a lot of memory and it worked fine.

clarkstyx

is this what youre looking for? http://wiki.mikrotik.com/wiki/Sms

clarkstyx

I suggest you use virtual machine software so you dont have to wipe out your hard disk

clarkstyx

http://www.skydsl.eu/

clarkstyx

Hi, I`m having a problem on my mikrotik, www service don`t work. The problem start today when I Change the ETH1 IP, I try to restore a Backup but it still don`t work! When I write in a Terminal IP SERVICE PRINT I get INVALID in WWW Flags: X - disabled, I - invalid # NAME PORT ADDRESS CERTIFICATE 0 ...

clarkstyx

my suggestion, use hotspot instead of pppoe clients,if you still insist in using ppoe client, try to read this http://www.mikrotik.com/documentation/m ... PPPoE.html

clarkstyx

I have this setup, Linksys-mikrotik-cctv , I can access CCTV using our local network by going to http://192.168.2.19 ,my mikrotik act as the dhcp server for our lan and it gets the ip 192.168.1.25 from linksys, I want to access it using my wan ip/ dynamic host name from outside, thanks.

clarkstyx

yeah, how i wish there would be a training school for mikrotik in the Philippines

clarkstyx

Weve been having these issuues lately since I started activating mikrotik webproxy. First, for some websites, It will give you "gateway time out" with all those writings from webproxy, refreshing the page will allow you to go to the website, however they find it inconvenient,another thing ...

clarkstyx

Hi everybody! That's my first post here at this forum. I'm from Brazil and my English it not the best I wish it was... My doubt is about the Mikrotik-advertise-Interval attribute that comes from Freeradius. In the documentation is written that this attribute is a Integer number, but this number is ...

clarkstyx

yes there is a public ip however,when i tried accessing MT remotely,its giving me the log-in page of my linksys router..I already disabled WAN or remote management of my linksys but still, im unable to get that screen

clarkstyx

Im planning to setup IPsec tunnel to connect to offices using changeip.com. Since I dont have static ip, Im finding a way of using the free hostname to setup VPN, is there any way? thanks?

clarkstyx

I believe that Mikrotik will be participating at The GITEX TECHNOLOGY WEEK this October 18-22 and i cant wait. Our company is planning to implement mikrotik around UAE and I believe that no one has done that yet.Your visit to this country will mark a new beginning for MT technology and I believe tha...

clarkstyx

will you be able to access it even if mikrotik is behind an ADSL router and im just using MT as firewall?

clarkstyx

For some routers like linksys, you can enable wan management and access it remotely using its dynamic dns or wan ip address, for mikrotik, can we also do that? I believe that mikrotik supports dynamic dns either by changeip or everywhereip by just applying the scripts,would that be enough? or do we ...

clarkstyx

Does mikrotik has application enforcement feature like sonic firewalls? example, my boss only wants the whole company to use IE 7 instead of other browsers such as firefox.. any idea?

clarkstyx

I finally solved it, blocking only the port is not enought , so I added the dst address:209.85.229.125, blocked port 443 and 5222 and it gtalk is not working anymore.. I had to remove the L7 filter for jabber and gtalk since it didnt help.

clarkstyx

yes you were right, in order for ipsec to work for new router os, you need to change the protocol to 254

clarkstyx

after doing this configuration, should the computers from the local office be able to access resources or shared folder on remote office and vice versa?

clarkstyx

maybe this is what youre looking for http://www.mikrotik.com/testdocs/ros/2. ... onding.php

clarkstyx

Im trying to block google talk but i am not able to succeed, heres what I did, disabled port 5222, still nogo, addeded gtalk regxp on L7 filter via winbox (^<stream:stream to="gmail\.com") also added jabber as well,also I disabled access to talk.google.com, is there any other things I need...

clarkstyx

Here's my setup, linksys modem(bridge mode) - MT - PC I was able to set my eth1 interface to dial out ppoe to my ISP and it says connect,masquerade to ether1 interface,enable DHCP server on my Eth2,setup default gateway but i cannot connect to the internet, please check my settings http://i28.tinypi...

clarkstyx

can anyone tell me the advantages of using mikrotik over sonic firewalls? answers will be greatly appreciated, thanks

clarkstyx

hi , is it possible to make a routerOs operating on Virtual Machine and connect it on the Network? because i have a problem, i have installing RouterOs on a Virtual Machine, but i cannot connect to the Network, i can ping IP address give to Virtual machine, but i cannot ping ip give to RouterOs. i ...

clarkstyx

I can not get the Mikrotik Router OS Network to work Question Description I installed the Router OS software (V 3.2.7), and than ran "/setup" command to setup ip address and gateway. ether0 IP: 192.168.0.250/255.255.255.0 Gateway: 192.168.0.1 After the setup, I pinged the local IP address...

clarkstyx

Hi , Every Body, can i Connect mikrotik Router Directly to Phone Cable Or Splitter without Adsl Modem ??? and How ?? for your situation, you need to use your adsl modem,set it up on bridge mode so it would pass the pppoe authentication on your mikrotik router,then follow the video, but if you dont ...

clarkstyx

Ive read this article : http://wiki.mikrotik.com/wiki/How_to_Connect_your_Home_Network_to_xDSL_Line in my case, ill be setting it up as a pppoe client that gets authentication from my ISP, since I have an ADSL modem connected to it and my mikrotik doesnt have rj11 port, ill still be using my adsl mo...

clarkstyx

Hi, can I connect the RJ11 to Eth1? No you can't. You need at last ADSL modem (with one rj11 and one rj45 port). Just connect MikroTik to rj45 port of ADSL modem and configure pppoe client on MikroTik's ethernet port connected to modem. best regards thanks for the quick response, so what i need to ...

clarkstyx

We will be replacing our linksys adsl router with routerboard 433ah,since the routerboard doesnt have adsl port,can I connect the RJ11 to Eth1? since we are using ppoe, I guess i should be setting up ppoe client on Eth1/PoE of the routerboard with the username and password from m ISP,configure masqu...

clarkstyx

i am planning to setup ip sec vpn tunnels between two remote offices however ill be using dydns.org as my dns/host provider,I believe that gradually,the public ip address changes and i believe that theres a script to refresh or update dns everytime the ip changes,something like every 5 minutes, can ...

clarkstyx

Can anybody recommend a reasonably priced cctv camera solution for a security project I have been asked to quote for

thanks

ilax is what we always use..they have varieties of cctv cameras

clarkstyx

I need to setup my mikrotik login page where my client login their user Id and Password,
How do I do that please I need help.

are you referring to hotspot?

clarkstyx

thanks, that worked for me!!

clarkstyx

Ive setup hotspot with radius and as able to block certain websites, the thing that I need to do right now is to block all websites (which is what I can do) and allow certain websites. To block all websites,i just entered *.* on DST host and I was successful in blocking everything, on web proxy, I t...

clarkstyx

do you have a wireless card installed on your routerboard?

clarkstyx

i was able to answer my own question, heres what I did, I created 3 different ip address pools, one for manager,employees and for ITs,created hotspot user profiles with corresponding pool names, then created users assigning the user profiles that I created. So ,after creating all the users, I set up...

clarkstyx

Here's what I have done, I was able to manage to create hotspot user with their own IP addresses and with those IP address, I can block or put some restrictions on those IP addressess or address pool, right now im thinking that its only ideal for small business environments,what if I have to impleme...

clarkstyx

its ok,I can access it right now,its only the hotspot which is preventing me to access it,by disabling the hotspot or assigning different ip pool, I can access user manager

clarkstyx

Im planning to create groups using my mikrotik router,example, admin groups,can acces any websites and theres no limit in bandwith, "employee" group has limited access in some websites, "guest" group, minimal access to internet, something like that..im thinking of hotspot as an o...

clarkstyx

i have my hotspot setup with user manager,I cant seem to access user manager using http://19.168.1.1/userman where 192.168.1.1 is my router ip..I already have subscriber created and router add on user manager,is there anythis that i missed?

clarkstyx

try this one

router.Send("/ip/address/print");

after that it will give you the IP address and the value number on the left most side, usually it is "0"

you can try this

router.Send("/ip/address/remove/0");

clarkstyx

I can now access winbox, I forgot to change the network adapted to bridge and replicate physical connection..

clarkstyx

i believe its a dns problem, try to setup your dns first, use the dns of your ISP..

clarkstyx

I installed routeros on vmware and after that, i cannot access myrouter os using winbox, I dont have serial console so the only way I can access it is either via ftp or winbox

clarkstyx

not yet, im unable to access it using winbox anymore,maybe its because I upgraded router OS using vmware and it was successful,however, I believe that it cannot work without the vmware mikrotik powered on, so what I did, I tried to reset it by putting metal into the golden part while turning it on,s...

clarkstyx

im currently using version 3.10 and im upgrading to 3.25

clarkstyx

you don't need to use Netinstall. Upgrade can be done by simple drag-and-drop to Winbox Files window. Download the new RouterOS package NPK file, drag it to Files window, and reboot the router.

if tried it already, but when i reboot, the OS remains the same,

clarkstyx

Im trying to upgrade the routerOS of my routerboard 433ah using netinstall,however the only harddisk that i can see is my computers hard disk,before,I can see the router as an option and now I cant see it. I also tried to drag the OS package using winbox on files and rebooted the router but the OS r...

clarkstyx

is there any way we can assign some specific IP on mikrotik to be able to connect to internet without restrictions and some IP that has limited access?

clarkstyx

Uh, you forgot to input your public IP... :) You should set the IP for the interface that you're getting your internet connection from (your "public" interface) to the IP address given by your ISP. Also, have you done the NAT masquerading? IMHO, the easiest way would be to connect to the ...

clarkstyx

Before you proceed, you need to find out what type of internet connection you have, its either pppoe which you need username and password on the modem to connect to internet,or DHCP which gets automatic ip from your ISP. Once you knew it already,remove the modem and linksys and replace it with the R...

clarkstyx

i think you also need this one Configure firewall to protect your router: /ip firewall rule input add connection-state=invalid action=drop \ comment="Drop invalid connection packets" /ip firewall rule input add connection-state=established \ comment="Allow established connections"...

clarkstyx

I was able to setup mikrotik but still I cant connect, here's what i did, i set the ip address on ether1(WAN)as 192.168.2.1/24,ether2 as 192.168.1.1/24 ,default gateway(ip add of my router) 192.168.2.1,dns server=dns of my ISP, is there anything i missed?

clarkstyx

I will be using mikrotik as a firewall, Im planning to make this setup,
modem-mikrotik(firewall)-router-switches-computer. Any other suggestions? Cause I will also block some websites and put some restrictions on our internet access. Thank you.

clarkstyx

thank you for the answer, yes my baud rate is correct, however im using a serial to usb console, will that be an issue, one more thing, I also installed router os 3.25 on vmware and I can access the router configuration from there, does that mean that it supercedes the original operating system of t...

clarkstyx

Guys, i need help, im new in mikrotik, i have a mikrotik 433 board and I believe it already have router os built in to it, ive been trying to access it using serial console with the use of secure crt, I can connect to the router but its not showing me anything.. Ive tried using winbox and its not wo...

Search found 69 matches