You have problems with file permitions, your database file of Pi-Hole or your container file can't be overwritten.

Regards.

How to allow write permission in RouterOS's container ?

I was try RouterOS 7 container feature with Pi-hole from https://help.mikrotik.com/docs/display/ROS/Container. but I got something error. when I was add regex filter in Blacklist , it got message " Error, something went wrong! While executing INSERT OT IGNORE: attempt to write a readonly databa...

It worked.. need to disable "add-default-route" in DHCPv6 Client. Thank you very much [admin@Ros] /ipv6> export # sep/15/2021 16:10:20 by RouterOS 7.1rc3 # software id = # # model = RB450Gx4 # serial number = /ipv6 address add from-pool=IPv6 interface=ether2 /ipv6 dhcp-client add add-defau...

Same result. Unable to use. Hello, Try going into IPv6->settings and check disable IPv6, then click Apply, and then uncheck it again and click Apply again, and see if there is any change. [admin@Ros] > /ipv6/settings/print disable-ipv6: yes forward: yes accept-redirects: yes-if-forwarding-disabled a...

My Router RB850Gx4 cannot use ipv6 after upgrade from 6.48.4 [admin@Ros] > /ipv6/address/print Flags: D - DYNAMIC; G, L - LINK-LOCAL Columns: ADDRESS, FROM-POOL, INTERFACE, ADVERTISE # ADDRESS FROM-POOL INTERFACE ADVERTISE 0 G 2405:9800:b600:7d8a::/64 ipv6 ether2 no 1 DL fe80::2ec8:1bff:fec8:c236/64...

I got problem with dhcp-relay , after upgrade my client cannot get address.
Now I downgrade to version 6.43.16 it work fine.

Can I install dude server into external storage on RoS?

I want to use CH340 usb-to-serial adapter. but Mikrotik not support yet.
Please make it support for this chip.

Hi, I need change format mac for hotspot mac authentication with radius. current I was test it send mac as user only 'XX:XX:XX:XX:XX:XX', I need change to 'XX-XX-XX-XX-XX-XX' , I was set mac format in radius tab as 'XX-XX-XX-XX-XX-XX' format but not working with mac authentication it use XX:XX:XX:XX...

if possible, I need feature Cisco ezvpn client support.

Thank for winbox for mac.

Thank you for all response. I was setup with my RB450G and run ROS later version (5.18) MY Current config [admin@450g] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 192.168.10.1/24 192.168.10.0 ether2-Lan 1 192.168.30.1/30 192.168.30.0 ether4 2 192.16...

any one can help me?

I try to use CALEA to sniff data from interface
and I use Wireshark open pcap files
every first packet in files Arrivl time is jan 1, 1970 ..
any wrong? or Can I settime stamp in package?
and if I using action type limited, what program to open it?

regard,

cannot login to userman via browser it show message

Your session has been reset due to inactivity.

I was try in IE, Firefox and Chorme browser same message.

5.0b2 Working with my server too.
But incorrect order interface number.
I'm using 6 port GbE Network server
Now server port 1 it show eth6

my step.
I'm update my rb1000 from version 3.3 to 4.2
after reboot it show "ROUTER NEEDS A NEW LICENSE"
I connect my rb1000 with winbox
and click update license
it show error message
"failed: key for specified software ID not found!"

I found same this problem in my rb1000.
now I downgrade to version 3.30 via netinstall
it working fine in version 3.30 but cannot upgrade license.