MikroTik

diogomaia

Anyone know if the new Cloud Router SFP interfaces are SFP+ ? or know a solution of 10 GB per interface with RouterOS?

diogomaia

my router and a Dell Power Edge 2x quad core x86 Opteron 1.7 ghz,
3 Giga ethernet intel network. I have only one firewall rule for NAT. and no control
bandwidth on this interface.
processing it is at most 15% of use, 1700 free memory.

diogomaia

I've been there a while noting that some of my routers interfaces is presenting rx drop, but this is never presented any abnormality in the network, but yesterday I got a router to have several rx drops, so I was unable to solve the problem when I took the negotiation auto interface , it still happe...

diogomaia

I have a 1100 with 200 mb of traffic, 300 ospf routes, three filter rules blocking port 25. and nat, the rb 1100 was 100% processing. deactivated when the connection tracking, processing dropped to 40%. if you want something with high throughput and effective, we recommend using a dell server with m...

diogomaia

We need more processing of SFP and also, we expected more from RB in 1100, the way and hope they hear our requests and everything is resolved in a later model =)

diogomaia

sorry for the topic boring guy, thanks for the tip =)

diogomaia

diogomaia

Hello friends, I would ask for help with ECMP. I have two radio links. each with 150 MB = 75/75, I'm trying to use ECMP to balance traffic between them. below is the illustration of my scenery, art works, most not in the manner which I expect when I do this way, UP Wlan1, Wlan 2 Down , I would like ...

diogomaia

I found something that should help me, I'll post if someone also needs

http://wiki.mikrotik.com/wiki/Supported_Hardware

diogomaia

good, with the celeron was running cool, so that's nothing he fought really could be something related to memory. i had to reboot to get back to normal. but with him, I saw that I needed more memory, as it was a service which I could not stop, I put xeon even liked a lot, because the cpu usage is on...

diogomaia

friends, I need a help here, I built a pc mikrotik with version 4.6 on a celeron. went crashing for some unknown reason, I swapped for a xeon, it works right, lately I've had more problems with dns, because it stops working, I sent an email and support staff told me that the problem was related to t...

diogomaia

following picture of it to my settings and log problems, I say, there is no problem of dns, routing, or flashes on the network, it's all normal, and the dude is accusing dns problem. already remade the dude from scratch, and yet the problem continues

diogomaia

3000 minutes my snmp settings

diogomaia

where I choose the time of snmp? I looked for this option here could not find more

diogomaia

hello, dude use a long time, and never had problems, so that a few days to ca, walk with a strange problems. my problem and the following: I monitor the transfers of data in several links by snmp, several times this information disappears, as if the link was the fallen and some routers accuse dns pr...

diogomaia

I changed the hw-retries and then not more not disconnected, apparently solved my problem. thanks =)

diogomaia

I am with the following problem: I used version 3.30. I've been having some more problems with some automatic route in ospf, when leaving the IPs operating the routes were not undone in a few occasions, and it generated inconsistencies in the routing. the staff of the forum referred me to use versio...

diogomaia

man, you helped me a lot, it worked =), now let me get this right, correct me if I'm wrong. in my opinion this setting would either be made in each of the routers, Anuncion blocks of ips in each router? if so, I would so one more tip. my reality here is the following: I have an area with 20 routers ...

diogomaia

I'm over it for months and did not fully understand a thing, can someone give me an example to use it? I would be very grateful =)

diogomaia

ospf area upgraded one yesterday for my version 4.2, the most ever met a problem, I use frequence mode= super channel in one rb mine, right after the upgrade that kind of attendance do not want more work, I had to use downgrade, as you know I use super channel in version 4.2?

diogomaia

And you're right, I had already opened a topic in the season, I had upgraded and had resolved, the more the problem happen again. I walk with problems in my link here, then my head is full, I'm sorry to have opened another topic. I will update this for version 4 and let's see what happens. thanks fo...

diogomaia

by what I understood to solve my situation I need to download version 4, plus she and beta, it works as it should? you use them there?? she has some kind of instability? I have over 200 mkts on my network, I wanted to be sure everything before upgrading. again thanks friend

diogomaia

man, you are my hero, always helping =) if you have msn or skype is there, and always good to have friends around: P

I will test here, to having problems with my clients right here so

diogomaia

I use version 3.30. without routing test, I put one in here, most not seen anything more ha not, until now not understood what changes the normal version for routing test. even with rountig test can not I remove those routes: (

diogomaia

I have had problems with routes that once disconnected are not removed from the routing table, ex:user X logs in and receives ip 10.1.0.1, within the area and created a route to this ip, after the user disconnects in some cases the route remains there when another client at another point with the sa...

diogomaia

I have a network with several areas ospf running, I would like to interconnect the edge routers in each area using ospf. q so when I run ospf between the edge routers me arises the following problem: ex: area 1, network 10.1.0.0/16, 10.2.0.0/16 area 2 network when the road between ospf routers edge ...

diogomaia

hello, I managed to find here, thank you for help, if you need me just call! thanks =)

diogomaia

I'm looking at the packages for the 400 series, and can not be wrong, none of them has more built-in multicast not, at least I do not think so, would show me where to find this package, or it is only in some specific version?

diogomaia

if not for pushing too far, you could link me where to find such a package?

diogomaia

I am deploying the solution ip on my network tv, so I'm running it in unicast yet, I'm trying to get it to multicast, I'm not getting it. already read various topics of the wiki and searched the manual, I got the operation, the more I'm not able to activate the igmp proxy. I saw the examples in the ...

diogomaia

I was using 3:27 and 3:28 versions, and only routing, the route was created and it was not removed after the ips are disconnected, updated the router to 3.28 and the unused routes have been removed, until the time gave no further problems, I will continue to watch here, if happens again I post here,...

diogomaia

I've had a strange problem with ospf, the client 1 connects to my network and creates a route to the ip of it, after he disconnects the route it remained there, then when client 2 connects to the ip that was being used by 1 client he did not surf because the old routes were not broken, anyone know a...

diogomaia

I took the supurt rif of my router and sent to the mkt, the problem was being caused by the existing nat router, since I have the solution, thanks for all the attention =)

diogomaia

man, I put the routing test, and not resolved, I am constantly having these problems, some routers do not recognize their neighbors, and some of the ospf to work from scratch and does not work anymore. someone can give me a light? I need urgently resolve this issue. and 3:28 am using version 3.27, w...

diogomaia

this is not the map which I use at work, most did this on the actual locations of the map, my network across the whole state, I want to remove as many hosts the map scale and very small. ta it is messy, most thought it was cool =) excuse my bad English ..

diogomaia

Sorry for the size of the topic, I'm using version 3.27. I tested here using rounting-test, post the result soon, thanks =)

diogomaia

First excuse my English, it is terrible. I have a problem related to OSPF, the situation and the following: I have a 1000 and rb 433ah RBS 6 connected to a switch, all interconnected by the network 10.2.0.0/27, all are within the same area. rb in 1000 I see all neighbors (433AHs), already in the RBS...

diogomaia

on 10 km on 433 ah 800 mhz, sr 71 a

Search found 38 matches

SFP + on Cloud Router ?

Re: rx drops problem !

rx drops problem !

Re: RB 1100 support BGP etc.

Re: RB1100

Re: Ecmp Help

Re: Ecmp Help

Ecmp Help

Re: what is the best PC hardware to mount a server mikrotik?

Re: what is the best PC hardware to mount a server mikrotik?

what is the best PC hardware to mount a server mikrotik?

Re: snmp help

Re: snmp help

Re: snmp help

snmp help

Re: Problems with the wireless version 4

Problems with the wireless version 4

Re: routing between areas, using ospf. help

Re: routing between areas, using ospf. help

Re: routes that are not removed when down (ospf)

Re: routes that are not removed when down (ospf)

Re: routes that are not removed when down (ospf)

Re: routes that are not removed when down (ospf)

Re: routes that are not removed when down (ospf)

routes that are not removed when down (ospf)

routing between areas, using ospf. help

Re: not think some options in my Mtks

Re: not think some options in my Mtks

Re: not think some options in my Mtks

not think some options in my Mtks

Re: problems with ospf routes that are not removed after use

problems with ospf routes that are not removed after use

Re: OSPF ERROR, HELP !

Re: OSPF ERROR, HELP !

Re: Show us your map

Re: OSPF ERROR, HELP !

OSPF ERROR, HELP !

Re: 802.11n