MikroTik

tikromik

Hi, I made a Typo, I meant 10 000 Routes. I am not sure how i will handle that. Another problem is the depletion of IPV4, so if we continue adding clients we will run out of V4 Publics, and we will have to give some clients local IP's again. And to Go v6 only wont really work at this stage. So the c...

tikromik

I have considered that, but it just get so complicated to manage it in areas, as we have allot of areas and an "area" can have more than 10 links to other areas. I did consider it, but it sounds hectic and can get complicated to manage.. I think carefully managing and planning pools will w...

tikromik

Good Day. Background: We have about 1500 Routers, and there are about 12 000 PPPOE users between all the routers. (routers Range from CCR to RB433) Currently the users gets local IP adreses in the 10.0.0.0/8 Range from pppoe Pools, and we use OSPF areas to only advertise the Ranges per Router. Aggre...

tikromik

There is only 1 dynamic interface, eoip Tunnel. But i dont care about monitoring it via SNMP or netflow. It looks lyke solarwinds software receive the data fom interfaces numbered high. Like interface 131, and then the logs state interface changes to 122 ect... http://thwack.solarwinds.com/thread/40...

tikromik

It is our main router to the Internet, and I just want mikrotik to send netflow on our internet interface.

I have set the netflow on the specific interface.

Is there anything else I can check ?

Thanks

tikromik

Hi. If I run Solarwinds netflow and send Data from my Mikrotik it works. But the Mikrotik changes its "ifIndex" constantly. Please see the reply from Solarwinds support: The issue from what we can see is not with Orion and is based on the configuration on your device as it appears the ifIn...

tikromik

I dont know allot about scripting, did allot of reading on this topic, i with sshpt ssh into a router and only run a single line, and as I understand there is no way i can remove the old items and add the new ones in a single ssh session, basically a 1 liner.

tikromik

remove [find] works !!

tikromik

I have now managed to add the correct ppp, hotspot and login radius servers, but i can not find a way to remove old one first.

I just need to remove everything under /radius and then add the new ones, there must be an easy way to do this ?

tikromik

Hi. I have managed to get a sshpt up and running, to execute scripts to multiple routers at once. It is working fine, and I have 2 files, one with login and another with host ip's I am trying to remove all items under /radius and add new ones. TO add new ones is working, but i need to remove all ite...

tikromik

WHat would you suggest I use ?
Maybe a fast SSD drive, and i5 CPU will do the trick.
I tried RB1100 but CPU goes toe 100% quickly.

tikromik

Thank you, I see now, wasnt sure about that last part.
ill test now.
The reason for all this is that clients max their queue of the pppoe and voip doesn't work anymore, so i want to route VOIP past pppoe.
Looks like this will work.

Thank you for the help.

tikromik

OK, thank you I understand now. I mark the connection from address list then a 2nd argument that marks the packets of that connection mark and then a 3rd argument that marks the routing of the packet marks Then i use that for routing. add action=mark-connection chain=prerouting disabled=no dst-addre...

tikromik

Hi. I have managed to create a script to update an adress list, only for 1 IP, that changes every month. It works. But i need to know how to route it throug a certain interface. The client uses a pppoe connection for default route, i would like to route the adress lsit IP past the pppoe on a static ...

tikromik

We are using Intel p4 3.2Ghz to monitor 490 items on dude (all mikrotik devices) only monitoring: Ping Volts Traffic on uplink interfaces total snmp traffic in: 1.2mb out - 1.2mb Dude frequently spikes to 100% cpu and stay there for a while, every time we want to add a new device it responds slow an...

tikromik

Hi. We want to get 100mbps internet connection from site1 over site2 to site3. For latency, redundancy and speeds sake we want to use 2x rocketm5 dishes on a rb1200 and bond the 2x lan interfaces. If i understand correctly it can be problematic due to tcp packets arriving out of order,https connecti...

tikromik

I am also highly interested in this solution.
I want to use 2x rocketm5 links on a rb1200 on each side and bond the eoip tunnels to create maximum throughput.
This will be for a 100mbps internet connection, but i would like like to have the tcp packet errors ect..
Anyone tested this before ?

tikromik

That is what we currently use, But the "full access" user on the board itself is what i want to change. If the router does not have access to the radius server or the link to the radius server is down, and we have to access it via the "full access" user on the router itself. I ha...

tikromik

I dont really need to change the username onl the password of the full access user

tikromik

Hi. I am administrating about 400 Mikrotik router on a routed network. I use radius authentication normally to log in to routers and to give access for support desk. I dont use any scripts at the moment only for backup. What i want is some kind of tool that I can add my routers IP's to. It must logi...

tikromik

I seem to have similar problem When I enable NV2 on my uplink, the clients that do not have NVT setup on the AP, their TX/RX CCQ drop by half, and the pppoe connextions keeps on dropping. When I switch of NV2 on the uplinks everything gets better but pppoe still keeps dropping? This caused chaos in ...

tikromik

Do you have a radius server ?
If yes, just set your Timeout on the radius setting on the mikrotik to 10000

tikromik

Hi. I would just like to know something before I start. I now have tested PCC with 10x 4m DSL lines, and it works great. I would like to prioritize certain TCP services, like port 80, and then shape p2p, so that it dont Kill my lines. Must I add these rules to mark Packets from layer7 and all p2p af...

tikromik

Ok.
I did put in 130km on the ap side, under NV2 tab

I see on the client side you can enter distance under advanced tab, would you suggest i enter each cleints distance seperately on them, and put the AP 130KM.

tikromik

I used version V4.16 with nv2, but the problem is there is a client closer that also connects, and when I enable Nv2 cant ping any one of the 2, but they connect, so i put the protocol on nstreme and client side on any, and it worked 2ms pings. framer policy set to best fit, polling enabled. I will ...

tikromik

We have managed to do an unplanned link of 130KM
tx/rx singnal 83/83
Signal to noise 30dB
P Throughput - 15 000kbps

with r52hn radios and 26dbi medium grids

can easy do 8Mb over the link both ways.

took a while to fine tune, but without an major effort, just wanted to share this

tikromik

My current x86 setup is a 1800Mhz CPU with 2gb memory, and it reads under system resources: Free memory 1842.2MiB CPU runs at anything between 14%- 50% and 12MB on the lan interface. With 600 Users and 5x 4mb lines. I really hope the RB1100 CPU can Cope with the job. I really would like to move away...

tikromik

About 600 users on this specific router

tikromik

I understand now. Is it a good practice to have more than one IP per interface ? And with the PCC balancing I normally select an interface, and not an IP. So i will choose in and out interface. As I understand from overclocking, basically it is not a recommended way, some people find it to work well...

tikromik

Cobine them it what way ? Bonding ?
The dsl's I have is Static IP's not pppoe connections.

tikromik

Hi. My current setup is a Intel Motherboard 1700MHZ CPU with 6 LAN ports doing PCC load ballance with 5x 4mb DSL lines. I want to upgrade to 10 x 4mb DSL lines + 1 extra for https connections. CPU runs between 11 and 38% It will only run the nesesarry rules for PCC loadballancing. Will the RB1100 do...

tikromik

I have an existing PCC load balancing setup that works perfectly, but in a "modified" way. I have 5x RB433AH routers, wireless connected to different sites. From them I have their ether 1's connected to a ROuterOS machine with 6x LAN's. (doing PCC load balancing) Cables run to a switch and...

tikromik

Hi. I need help to write a script. What i Want to do is capture all TCP traffic on port 443 (secure port) and send it to the firewall address list. That I Can do..... Now i want a script that will use these ip's in address list, and create static routes for them, all through specific IP (route) I ca...

tikromik

No answers ?
No Ideas ?

tikromik

Hi. I don't know if I am asking the impossible. New to MikroTik. My Current configuration. 5 x Mikrotiks, 433AH utilizing all 3 wireless interfaces. Each Mikrotik has its own DSL line with own gateway. and each ether2 goes to a switch for backup, encase an DSL line goes down. So i can route to other...

Search found 35 matches

Re: BGP - Route reflector 1500 Peers - 12K Users

Re: BGP - Route reflector 1500 Peers - 12K Users

BGP - Route reflector 1500 Peers - 12K Users

Re: SNMP breaking Graphs - Solarwinds -

Re: SNMP breaking Graphs - Solarwinds -

SNMP breaking Graphs - Solarwinds -

Re: remove all script - radius

Re: remove all script - radius

Re: remove all script - radius

remove all script - radius

Re: monitoring 490 items - want to move from x86 to 1100ahx2

Re: Routing from address list help needed

Re: Routing from address list help needed

Routing from address list help needed

monitoring 490 items - want to move from x86 to 1100ahx2

100mbps internet connection over bonded help needed

Re: EOIP and Balance-rr Bonding

Re: Chane root - username and password wih script

Re: Chane root - username and password wih script

Chane root - username and password wih script

Re: NV2 in v4.17 doesn't work - am I missing something?

Re: Drop Authentication Packets

pcc load ballancing+Qos

Re: 130km link great success zero effort

Re: 130km link great success zero effort

130km link great success zero effort

Re: 11 x 4mb DSL on RB1100

Re: 11 x 4mb DSL on RB1100

Re: 11 x 4mb DSL on RB1100

Re: 11 x 4mb DSL on RB1100

11 x 4mb DSL on RB1100

PCC load balance with separate proxy - interesting situation

help with script----use of address list for routing

Re: 5 routers one proxy how to ?

5 routers one proxy how to ?