MikroTik

bronco1980

Please guys how can i bypass the queue here? Media Server Address: 192.168.100.2/28 I have made this settings and couldn't resolve it! ip firewall mangle: chain=prerouting action=mark-connection new-connection-mark=ipmarkconnection passthrough=yes dst-address=192.168.100.0/28 log=no log-prefix="...

bronco1980

Hi Colleagues, I have 2 HTTP cache server on my LAN, the 1st is 10T in HDD size and the other is 5T. how can i redirect the traffic port 80 to both of them effectively? I have mangle it: ;;; REDIRECT CLIENTS TO THUNDER-CACHE chain=prerouting action=mark-routing new-routing-mark=Thunder_Cache passthr...

bronco1980

Dear friends, all my clients are connecting to the network using dynamic pppoe and are successfuly connected.
I noticed that the ip address and the gateway are the same ip for each client!
If i want to change the gateway, how can i do it?

bronco1980

thank u my friend,

I guess the problem was in NAT,

chain=dstnat action=redirect to-addresses=0.0.0.0 to-ports=53 protocol=tcp
dst-port=53

chain=dstnat action=redirect to-addresses=0.0.0.0 to-ports=53 protocol=udp
dst-port=53

i have disabled them also,

thank u again my friend

bronco1980

Thank you for your reply,

can you please give me an example on how to drop UDP 53 for DNS queries from public?

bronco1980

Dear Friends, I own a small WISP today I'm getting this error when I'm trying to use the search engine, like Google and yahoo.. We're sorry... ... but your computer or network may be sending automated queries. To protect our users, we can't process your request right now. How can i know which of my ...

bronco1980

it worked .. thank u my friend

bronco1980

Dear Colleagues,
How can i mangle Google.com to redirect it on another route?

Thanks in advance all!

bronco1980

Thunder cache is gr8..
this is their website: http://www.bmsoftware.org/index.php/en/

bronco1980

thank for the reply,

I'm not using the ''proxy'' in the mikrotik, instead I'm using thundercache..
is there another solution we can make?

bronco1980

Dear Colleagues, how can i redirect traffic destined for example.com to bypass the cache server?

Regards,

bronco1980

Thank u man.. i appreciate it..

Regards

bronco1980

I did tried this but the problem is in the address field.
i can't put the ip with the extension, so the user must write all the URL http://www.examle.com/radius/admin/login.php to access his site!
This is the problem what we are facing!

any solution for this?

Regards,

bronco1980

Thanks for replying,

This is for the radius, so that each client can check his usage and the speed of his account!

Regards,

bronco1980

Dear colleagues,

I have an internal web server, how can i redirect this site: WWW.example.com
to this: 192.168.168.1/radius/user/login.php?

waiting for your reply,
Regards,

bronco1980

Hallo Guys, I'm using pppoe for my clients and static simple queue to control the bandwidth, lately I'm facing a problem when the cache-hits is unlimited which leads to slowness in browsing and congestion in the network! is there a solution to control the bandwidth coming from the cache server per ip?

bronco1980

Hi guys..

How to Send CACHED Contents from ''squid'' to user at Full Speed using ip firewall/Mangle and queue tree?

I'm using mikrotik v5.24

bronco1980

Thx guys a lot...
I have solved it.. the problem was with local address in pppoe clients, it was blank before, once i added it with the dns address in ppp/profiles caching start to cache...

Thx again for your time

bronco1980

I'm using the Dns giving by my isp!

Can u help on how to do this.. all my clients are pppoe clients

bronco1980

Thx for the reply.. here is my settings: [admin@Swift] /ip dns> print servers: 10.249.209.101,10.249.209.102 dynamic-servers: allow-remote-requests: yes max-udp-packet-size: 8192 cache-size: 8192KiB cache-max-ttl: 1w cache-used: 12KiB STILL DNS CACHE IS EMPTY!

bronco1980

Yes ..

ip/dns/ servers,, and i have put the server addresses, and in ppp/profiles i have put there also Ip of the Dns.

Let me know pls if there is something missing!!

Thx.

bronco1980

Hey Guys..

i have upgrade to 5.24 but the dns server in ip/dns/cache does not cache any content!!

Waiting for your reply..
Thx guys

bronco1980

Hey Guys.. After upgrading to v5.24.. the script that should monitor the amount of bandwidth is not working at all!! :local traf; /queue simple :for i from=1 to=254 do={ :if ([/queue simple find target-addresses=("10.11.1." . $i . "/32")] != "") do={ :set traf [get [fin...

bronco1980

Hey Guys.. After upgrading to v5.24.. the script that should monitor the amount of bandwidth is not working at all!! :local traf; /queue simple :for i from=1 to=254 do={ :if ([/queue simple find target-addresses=("10.11.1." . $i . "/32")] != "") do={ :set traf [get [fin...

bronco1980

Hi all

After upgrading to 5.24 all the ppp secret password is dotted..
can't find the option to uncheck it so that the pass can be visible !!
thx guys

Waiting for you reply!

bronco1980

Hey Friends,

I need your help here..
We have a small network, around 800 users, all our clients are pppoe.
The Dns in ip/dns cache is not caching anything.. the purpose in caching is to minimize the request sent to the external DNS which is 8.8.8.8.

any idea why isn't caching!?

thank all!

bronco1980

IT WORKS!!

thanks A LOT

bronco1980

Hi All .. After the upgrade from version V2.9 to V4 this script is not working anymore!! Anyone knows how to fix this pls!? :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("10.10.4." . $i)] != "") do={ :set traf [get [find target...

bronco1980

Hey Guys,

We are a small ISP and we Provide unlimited accounts to end-users.
Is there a way with hotspot to automatically change the rate of the heavy users till midnight!?

Thanks All

bronco1980

Hey Guys,

hope all ur good, i'm using pppoe with user manager v5.
is there a script that monitor the traffic of each user and decrease the speed of the heavy ones till midnight, thank u all!

bronco1980

Can anyone explain to me what should i put in ip firewall for this option to work?!!
I have clicked on use_ip_firewall_for_pppoe!!

Thank u

bronco1980

Hey Guys, Several days and we noticed an unknown traffic in our wireless ap! the Log on the ap doesn't show any error... the Lan interface connected to the network shows that this is wireless traffic, not LAN. anyone knows how to solve this, we have tried upgrading the firmware, same problem!! Thank...

bronco1980

Thx for reply..
the result from the torch shows that this is a pppoe sessions!! any idea how we fix this

bronco1980

Hey Guys, Several days and we noticed an unknown traffic in our wireless ap! the Log on the ap doesn't show any error... the Lan interface connected to the network shows that this is wireless traffic, not LAN. anyone knows how to solve this, we have tried upgrading the firmware, same problem!! Thank...

bronco1980

Dear Collegues, after finishing the settings we notice a serious problem after using wireless encryption, some laptops are connected, some are not, i have upgrade it to v5.21 and still have the same problem, if we disable the encryption all the laptops works fine.. I have tried several encryption me...

bronco1980

hi collegues,
how to block the incoming ports from 11000 till 65535 tcp ?

bronco1980

thanks for replying man, i appreciate it..
we'll try like u said .. i guess they will not like it at all

bronco1980

Hi guys,
pls can u help me block utorrent, because it's consuming a lot of bandwith in our network..

Regards,

bronco1980

thank u for replying quickly..
this is for rb500?

bronco1980

Hallo Friends,
I have an rb500 with 2.9.51 packages installed, all working good.
i need to download all-packages 3.30 1st in order to upgrade it to v4..
from where can i download it?

Thank u all!

bronco1980

Dear colleagues, I have a problem with my network, hope someone can help me with it. My clients are pppoe and i'm using a squid server, all works fine and my clients can downoad at full speed from the squid cache Server. the problem is with some wireless Links that it can not handle a lot of traffic...

bronco1980

Hallo, I have 433 with ap mode enabled. in the bridge/filter i have forwarded the (ip/pppoe-disovery/pppoe-session) and everything else is to be dropped. i don't want the arp to be forwarded also because the wireless is not working properly when i did it. how can i let only the ICMP be forwarded by ...

bronco1980

I will recommend to use RB433 with 3 wireless Interfaces on Branch1 and the rest RB411.
Use 5Ghz between HQ and Branch1.
U can use 2.4Ghz between Branch1 and Branch2 and Branch3 depends on the interference and the distance.

bronco1980

U mean u need to Check the inside UPS from outside the Network:
If so, IP/FIREWALL/NAT
chain=dstnat action=dst-nat to-addresses=(ADDRESS OF UPS) to-ports=(PORT OF UPS)
in-interface=(REAL INTERFACE) dst-port=(PORT OF THE REAL INTERFACE) protocol=tcp dst-address-type=local

bronco1980

1st mark the packet: IP/FIREWALL/MANGLE chain=forward action=mark-packet new-packet-mark=HTTP-FULL passthrough=no dst-address=192.168.88.100 dst-port=80 protocol=tcp AND THEN USE QUEUE TREE: name="HTTP-QUEUE" parent=global-out packet-mark=HTTP-FULL limit-at=5M queue=default priority=1 max-...

bronco1980

R u using a Beta version of mik or ur using a cracked key?
If so buy a license and ur problem will be solved!

bronco1980

did u Tried This:
IP, Web proxy, use parent proxy and write the address of the parent

bronco1980

Ok .. All is Good
Thank u Guys!

bronco1980

thanks for replying.. I have test it but it didn't work, did u mean about [/queue simple find] the ''queue name'' or the target IP address, because i test both and i can see the script is counting on the ''Run Count'' but it did not disable all or any of the simple queues. I'm, trying to disable all...

bronco1980

Hi All.. all my clients are PPPOE and the bandwith for each one is restricted by simple queue and scripts, all is good..
I'm woundering if there is a script that disable all simple queue at night?

Thank u all

bronco1980

Hi All.. all my clients are PPPOE and the bandwith for each one is restricted by simple queue and scripts, all is good..
I'm woundering if there is a script that disable all simple queue at night?

Thank u all

bronco1980

thank u for your reply!
i'm on the way to test it..

bronco1980

hi .. i have an RB 433 running on 3.30 and u need to upgrade it to 4.16 ..
my question is: i should upgrade my RB to v4...1st and then to v5... or i can do it directly to 5?

Waiting for your reply, thank u all

bronco1980

Hey guys, i need ur help here pls.. all my clients are pppoe clients with simple queue configured and scripts, everything is working fine. I have a squid proxy and i have redirect the traffic to it chain=dstnat action=dst-nat to-addresses=*.*.*.* to-ports=8080 src-address=*.*.*.*/24 dst-port=80 prot...

bronco1980

It's ok my friend .. i fix it!!

Thank you for your time!

bronco1980

Any idea how to connect remotely to dude server that is internal, behind a mik router (redirect to port 2210)?

Thanks Collegues!

bronco1980

Thanks A lot My Friend..It Worked!!

bronco1980

Hi, I'm using a single Real Ip Address to access the internet, i have installed a dude server inside my network, how can i check the dude server from outside my network? I have tried to make ip firewall / Nat .. still doesn't work! how can i see the web interface of the dude server from outside my n...

bronco1980

How to downgrade from 4.10 to 2.9 ..
any idea?

bronco1980

My Script was working normally for shaping the amount of traffic on 2.9.51 .. but after upgrading to 4.10 the script stops working .. :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("10.11.2." . $i)] != "") do={ :set traf [get [f...

bronco1980

it still not working ..
the script is running ( i can see this when the cpu is 100% ) but nothing is changed in my queue.. meaning users passing the 200M still running at normal speed after the script is turned on.

anyone know how to fix this guys!!

bronco1980

I really didn't know how to write it and make it work!! here is the script that it was working on 2.9 and would like to make it work on 4.10. :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("172.28.2." . $i)] != "") do={ :set tra...

bronco1980

need ur help colleagues,
after upgrading from 2.9.51 to 4.10 .. the script isn't running anymore..
how can i fix this?

Search found 63 matches