Any help please???

for 192.168.0.98 port 80 protocol tcp example: ip firewall dst-nat add dst-address=55.155.155.55/32:80 protocol=tcp action=nat to-dst-address=192.168.0.98 and for the internal network: ip firewall src-nat add dst-address=192.168.0.98:80 protocol=tcp action=nat to-src-address=<internal ip of mikrotik...

The mikrotik is 2.9.2 configured as station with an atheros wireless card. I'm connecting as client to a remote access point (not very remote, 300 meters with perfect visual contact). This problem rised when I disabled in mikrotik, the neiborhood discovery protocol (on the wireless card) since it wa...

When there is no traffic from my miktotik I get the following log entries wlan: lost connection to mac_address got deauth: no activity(4) This entry is every 30 minutes and especially at night. And after exactly one second later it connects again. Does anybody now how to prevent that or at least not...

Never mind.
The bridge on mikrotik works fine.
The problem was with the remote rooter.
Thanks

Thanks for the reply. It is a very basic setup. On mikrotik pc there is a wireless atheros card configured as station to a wireless network. The ip is eg. 10.184.2.33 It is working fine. Also on mikrotik there are two ethernet cards (eth1 and eth2). I have enabled them and I didn't gave them any IP....

I have read somewhere in this forum that
I must enable ntp client and netwatch.
Ntp client to which ntp server;
netwatch which interfaces;
Why is this necessary;

Any HELP;

Hi all I have a mikrotik 2.9.2 with one wireless atheros connecting to a wireless network (as station) and 2 ethernets connecting two lans to the router. I have a bridge with ports the two ethernets on the router. My problem is that from the lans I cant ping the wireless network and vice verca from ...