MikroTik

pturkey

I have upgraded to 6.40.5 on (2) DynaDisk 5 and RB2011 also upgraded the firmware. After the upgrade all the RB's where cutting out. Using btest to any upgraded unit shows good speed, then no speed for several seconds intermittently. After downgrading all the speed test was constantly good. It looks...

pturkey

I still have 1 unit that will not work.
After the upgrade on 2 units I was able to get 1 working.
I need the other DynaDish 5 replaced.
It has been about a month with this un-usable antenna.

pturkey

I upgraded to 6.33.3 and it has the same problem.

pturkey

I am now able to get logged in.
The answer is to use the power injector that came with the unit.
It will not work with any other injector.

pturkey

It looks like the ethernet port is disabled.
I am able to get the DynaDish to connect to an AP, but I can't login to it.
The firewall is blocking me.
Is there a way to get past the wirewall?

pturkey

I need the two DynaDish fixed or replaced soon.
How do I fix this problem?

pturkey

They are new units out of the box. I just received the last week.
They had what ever MikroTik sent them with.

pturkey

The first one I did was in Quick Set and the other was with winbox.
The version was 6.33.2

pturkey

Now what?
I have 2 new DynaDishish's and they are both DEAD!
Replace them or let me know how to make them work.

pturkey

I have 2 new DynaDish units I took them out of the box and upgraded to 6.33.2 now both of them are dead. I can't even get them to connect to the netinstall.
I needed them install today.

pturkey

I forgot to say that I am using 6.33.1 on x86.

pturkey

Every time I select the Logout button it displays Invalid/unknown response from server:
At this point I must disable and enable the web service.

pturkey

Every morning all the MikroTik CPE's have no usable connection, all the Ubiquiti M5's keep working using the same AP. They are all in the same area. The AP is set: /interface wireless set [ find default-name=wlan1 ] antenna-gain=19 band=5ghz-a/n channel-width=\ 20/40mhz-Ce country="united state...

pturkey

winbox 3.0rc10 is now creating a folder instead of a data file of the 1.1.1.1.viw.
I am using Linux with wine.

pturkey

I had this happen to me 2 times, both my fault. When I get the new unit, I drop a script in the terminal. 2 lines where: /system routerboard upgrade y I have removed this from my script. Before doing the routerboard upgrade you need to do an OS upgrade. The blinking led can be fixed by holding the r...

pturkey

Thank you.
Setting the long cable worked.

pturkey

I have 2 new 750P-PB and both of them will not power up a Mikrotik or Tranzeo device.
It will work ok on a Ubiquity.
I get "short curcit" on all the RB's.
I tried a New SXT Lite5, RB411 and a RB912UAG-5HPnD.
When I plug in a 750UP they all work fine.

pturkey

I just upgraded to 6.27 on my RB711-5HnD and upgraded the routerboard to 3.22. It looked good at the start so I ran a speed test at http://www.speedtest.net/. The router disconnected, then I ran a wireless scan it shows no ap's at all. Rebooting makes it reconnect but it disconnects as soon as I try...

pturkey

/tool user-manager database> load name=Database.umb Restore user-manager database? [y/N]: y Loading user-manager database backup Failed to load user-manager database backup failed to open file for writing: No such file or directory /file print # NAME TYPE SIZE CREATION-TIME 0 log.0.txt .txt file 118...

pturkey

I have the same problem.
I upgraded from x86 6.12 to 6.20.
This needs to get fixed soon.

pturkey

pturkey

RB711-5HnD I upgraded to 5.19 and then tried a btest. Within 3-4 seconds it lost wireless connection. I changed to several AP's and got no connections. I also tried a scan for a AP, there was nothing listed. When I rebooted everything started working. Tried two times with same resolts. I did make a ...

pturkey

I was unable to look.
My network was not accessible.

pturkey

I upgraded a hotspot that is connected to rhe gateway router.
When it came back on Most of my network went dead.
After recycleing the power it everything is okay.
RB333
I will not be upgrading anymore with 6.19.

pturkey

Wen opening winbox the first time it works fine.
If I select neighbors then close winbox and reopen it change to managed most of the routers are missing.
If I close winbox with it on managed thing are working fine.
I also would like to be able to use https:// in the managed routers.

pturkey

Thanks. I did'nt look for a delay.

pturkey

/tool user-manager database save name=Database ; /tool e-mail send to="name@somewhere.net" subject=([/system identity get name] . " Database Backup") file="Database.umb" ; This was working until I upgraded to 5.14. Now I get this. /tool user-manager database save name=D...

pturkey

/tool user-manager database save name=Database ; /tool e-mail send to="name@somewhere.net" subject=([/system identity get name] . " Database Backup") file="Database.umb" ; This was working until I upgraded to 5.14. Now I get this. /tool user-manager database save name=D...

pturkey

I fixed the corrupted database. Now I have less disk space. What now?? :( /tool user-manager> database clear Dangerous! Reset whole user-manager database (except logs)? [y/N]: y Resetting user-manager database user-manager database cleared /tool user-manager> database print size: 75 kB in-use: 100 %...

pturkey

This is looking better. :shock: /tool user-manager customer> pr Flags: X - disabled database is corrupted /tool user-manager database> load name=Database.umb Restore user-manager database? [y/N]: y Loading user-manager database backup Failed to load user-manager database backup write error: No space...

pturkey

First of all is I can find no way to see how much time a user has left.
There is nowhere in site a way to add time to the user.
Now there is no disk space to go forward or back from here.

pturkey

What happened to all the disk space on my RB1000?
All I have left is 7.2 Mb after using 3 Mb.

pturkey

Where is the documentation for version 5.0?
I can't get it to work and there is no way to go back to version 4.17.
Version 5.0 took up all the memory on my RB1000.
I only have 7.2 Mb left on the router now.
It looks like I am stuck with a broken OS.

pturkey

I installed the routerboard update.
I would like to get my old configuration back.
Now how can I undo the update?

pturkey

Thank you.
That works better.

pturkey

This will work better. Open a new spread sheet. Put the ip addresses in column B. Fill column A with "address-list add list=banned address=" no quotes. Highlight and copy both columns. Paste it in notepad. Put /ip firewall at the top of the page. Remove the tabs between address= and the IP...

pturkey

Open a new spread sheet. Put the ip addresses in column B. Fill column A with /ip firewall address-list add name="list name" address= Highlight and copy both columns. Paste it in notepad, then you will need to replace the tabs with a single space. At that point you should be able to past t...

pturkey

Why am I getting web-proxy logs on my hotspot. I have the logging set to account not web-proxy. The logs do me any good they are full of useless information. "May/06/2010 09:42:04 web-proxy,account 192.168.101.165 GET http://partnerpage.google.com/comdynam.com/default/postlogin?pid=comdynam.com...

pturkey

I tried re-creating the server and it was still not working.
I had to install 5.0 beta.
DHCP work good on 4.6 and 5.0.

pturkey

The DHCP server is not working on version 4.7 RB333

Search found 40 matches