In tools/Profile you can see the diferents process than consume resourses

If your RB has a Ip public, you resolve locally the access of FTP. But if your connect outside, you must study how your packet back in IP\Route, maybe back throught the Gateway and not over VPN. In this case, you mangle connection and route over VPN.

Now, I only have this idea:

On each CRS125-24G:
One dhcp-server each port/interface, one IP per pool with reply-arp only activated.

It´s a lot of work and it´s not elegant way to do it.

I hope a better way exist from CCR1016, just only one dhcp-server!!.

I have 175 users in a network, all on cable and connect directly to switch. When I have any problem witch cable, it´s so dificult detect the cable on Switch. If I could do fix the Ip-user with the port-fisic, I resolve this problem.

I need to Ip as a function of physical port that I connect. example: My network is 192.168.1.x/24 if I connect on port 5, I want that computer IP 192.168.1.5 if I connect on port 3, I want that computer IP 192.168.1.3 Where to write the script for the DHCP-Server deliver the IP I want? Any idea? tha...

Thanks you very much, you are been very fast to answer

I'm sorry, i little mistake, local was wlan2. now is good. I haven't done the test, this is only one theory.
I would like know if there is one way to do with BGP or OSPF. Is it possible??

Thanks

I try to improve my knowledge on Advanced routing with the next lab experience. Diagram1.jpeg Now I will do the next way (like PCC dual-system), I think that is NOT a good way because it would be hell for more than three nodes. I guess the best way is an advanced routing. What would be the best way ...

Hello, I have a Huawei Mobile Connect Model E620 (3G) modem connect to PCMCIA port on x86. On Ubuntu 10.04 it works perfetly with that configuration: Phone: *99# APN: ac.vodafone.es PIN: 1140 name and password: vodafone Now, I want it to work on mikrotik 4.11, my configuration is: /interface ppp-cli...

Between 4 and 5 put the next: /ip firewall filter 5 ;;; SSH for secure shell chain=input action=accept protocol=tcp dst-port=22 6 ;;; WWW chain=input action=accept protocol=tcp dst-port=80 7 ;;; Dude Server chain=input action=accept protocol=tcp dst-port=2210 8 ;;; Dude Server chain=input action=acc...

I follow this example: http://wiki.mikrotik.com/wiki/User_Mana ... ot_Example

and i don't know because doesn't work, somebody can help me?

Anything wrote in Firewall

Thanks

I found answer!!

Easy, on RB433AH I need to conf like station-pseudobridge

This is my connection diagram of my net 4.png I can ping with all users except on brigde3, from 10.0.0.1 ping to 10.0.0.3 but NOT to 10.0.0.6 From 10.0.0.3 I can ping with all From 10.0.0.6 I only see brigde3 What's the problem?????? Why can't I work Ips on brigde3 but I can see their MAC?????? Than...

Thank your very much, I have linked and I found all

I have a HotSpot and I wanna add rules to my firewall but I need know what means...

1) Tarjet hs-auth
2) Tarjet hs-unauth
3) Tarjet hotspot
4) Tarjet hs-smtp
5) Tarjet pre-hotspot

regards

The next go to Ip/Firewall/nat and
add
chain: src.address
In.Interface ether3
Out Interface ether1
action masquerade

and de same with the other link

Of course,

On ether3 port RB450G I am connected with 10.0.0.39/26
On ether5 port RB450G is linked to RB433AH with 10.0.0.2/26

when i wanna open winbox on 10.0.0.2 i cann't by hotspot, i suppose than i need a new rule on firewall but i don't find it.

Thanks

Hello!

A RB450G with HOTSPOT with 10.0.0.1/26
A RB433AH with 10.0.0.2/26
Me with 10.0.0.3/26

I authorize in hotspot i can't work on RB433AH throught winbox but a disenable hotspot and i can,
what do i need to do in firewall to can work??

Thanks

Thanks

Yes, I have 3.28 version of RouterOS but don't work, I will send a email to mikrotik for future edition, but

How do I do a "supout.rif"?

thanks

Hello, I have a Intel PCI-Express 10/100/1000 with 82574L chip and it don't work, I have seen the hardware supported and it isn't supported by RouterOS but I have seen to much Intel interface are supported. In the official web of Intel this driver is open source, Is it possible to do it work? and ho...