Hi all,

At this moment I have hotspot+PPPOE on the same interface and it's working, but windows clients have disconnection problems, so I ask if I could have hotspot+PPTP on the same interface. This is possible? Please need yours help.

Best Regards.

Hi,

Have you tried using /32 netmask for hotspot clients?
Have you tried add a rule to deny communication between hotspot users?

Regards.

I use mikrotik box as a server and WRT54G as APs (bridge mode), so I will try to test another AP or change WRT54G for MK APs. One last thing, I would like you could look to my PCQ queues config, it's right configured or not? I'm trying to give the most priority to DNS and WEB and lowest to P2P. Than...

All the clients are ALL computer with integrated WIFI. I disabled dhcp-pool on hotspot interface and it's working, so I have dhcp server on hotspot interface and NO dhcp-pool on hotspot servers tab, so let's see if the duplicate mac continues... I have addresses-per-mac=2 on hotspot interface becaus...

Hi, The ROS version is 3.25 and the actual config is below. Please let me know if you find mistakes or errors, because I'm getting duplicate MACs again. Access Point is configured in bridge mode. NETWORK.jpg Attached is actual configuration. Please let me know how can I solve this problem. Best Rega...

Hi all, I have mikrotik with hotspot + pppoe. My clients get an ip by dhcp, and then they can visit hotspot or make a pppoe connection to access to internet. I want to ask if it's normal that the same client get 2 ip address. Here I show you what it's happening. 192.168.182.x it's a range for hotspo...

Hi again,

Dont work as expected. I enable these firewall rules, and I ping from mikrotik to 192.168.2.25 and I get no response. I think something is wrong.
What can I check?

Regards.

Hi, I have tried the above firewall rules and it dont work. I have tried: /ip firewall nat add chain=dstnat action=dst-nat dst-address=192.168.2.25 to-addresses=192.168.183.1 place-before=0 add chain=srcnat action=src-nat src-address=192.168.183.1 to-addresses=192.168.2.25 place-before=0 What I'm do...

Hi, I configured mikrotik to show a hotspot informative page showing coverage using a range 192.168.182.x/24 for this. Also I have a few WRT54G configured in subnet 192.168.183.x/24. Mikrotik have 3 interfaces: 1º Internet 192.168.2.x 2º Lan 192.168.0.x 3º Wireless 192.168.182.x (APs 192.168.183.x) ...

Hi,

I have a Raq4i and I would like also install Mikrotik, please could anyone tell me how could this be done?

Best regards.

Hi,

I'm trying to build a mikrotik system with pppoe and hotspot on the same interface like you describe here.
Please could you send me your configuration?

best regards.