Hi guys, I create CA and client certificates at Mikrotik router... I play with it and try different connections protocols etc... Now, I like to delete them all and start over, but I can not delete them, only revoke them!!! If I try to remove them, I got message: "Couldn't remove Certificate <xx...

I figure out... I need to create another route for site 5 to central router: add comment="Route ALL" distance=1 dst-address=10.0.0.0/8 gateway=Central add comment="Site 5" distance=2 dst-address=10.0.5.0/24 gateway=Location5 add comment="Central 5" distance=1 dst-addres...

So, only if I have same subnet size distance makes priority... OK, I understand... Here is my problem... I have 25 sites (locations) with Mikrotik routers connected to central Mikrotik router. So, I'm connected to that central router as well. But only one of this 25 sites (locaton 5) is special case...

I understand that, but distance is different
Shouldn't distance change priority of route?

If I understand correctly, when you create a new route, "distance" makes priority. Eg. if you have two same route to different interface, route with smaller priority will have advantage and will be "active" route. Example: add comment="Route 1" distance=5 dst-address=10...

WOW!!!! I downgrade ruter back to 5.23 and today I make upgrade to 5.24... In first it did not work as usual, but, then I do what you suggest... 1. Shutdown router (RB2011UAS-RM). 2. Unplug USB Modem from and OTG cable (MicroUSB->USBFemale) 3. Unplug router (RB2011UAS-RM) from power source 4. Plugin...

With ROS6rs10 there none of my modems show up in any resources anymore. I beleive that is bug in firmware or maybe in hardware design at micro usb port. In ROS5.23 problems is only at routers with microUSB and OTG/HOST combination with high speed modems (HUAWEI is 480Mbs modems) Only OptionNV (old m...

Here pict for RB2011UAS-RM

As you can see same HUAWEI modems not recognised correctly... (there no USB Ports and PPP_Out Clients)

Here I create some test and RB2011doues not recognise HUAWEI modems. I attached 6 pictures and for RB751U abd RB2011UAS-RM with E372, E392u and an old OptiondNV modem tests As you can see os is 5.23 for both RB... I do NOT beleive that is OTG cable is problem because modem are recognised as and USB ...

Does RB2011UAS-RM / RM2011UAS-2HnD-IN supports USB 3g/LTE modems? My USB modems HUAWEI E372 and E392 (LTE) does not recognised by router. Both modems work fine with RB751U-2HnD I use normal MicroUSB -> USBFemale cable as well as OTG version In use of normal cable there no activity on modems LED ligt...

Hi again, Problem solved! As I think... problem is on TCP/IP... MTU and TcpWindowSize... I solve problem on both of my f****d computers. How to do it manually! 1. Open registry with regedit 2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces 3. You will fi...

Hi, I have same problem with netinstall (FATAL ERROR bad network connection...) I have no sollution yet, but I find where problem is ... it is on TCP/IP settings... I have no problems with netinstall BEFORE I run TUNEUP 2009 - I put it to optimize my TCP/IP connection and - everthing works but NO ne...