Have you added a DHCP client to the LTE interface and have masquerading turned on? I'm not sure what you mean when you say 3G modems works as a router and it "unload modem itself". LTE and PPP connection to a USB modem work pretty much the same. Yes, I have. Everything works. My question ...

Hello everyone. I'm using rb951ui-2hnd (firmware v6.18) with 3G modem Huawei E3131. After inserting this modem in usb port LTE interface is automatically created. As I understood, LTE or ppp-out interface creating depends on 3G modem versions - old one have ppp-out and almost all new HiLink modems h...

CCDKP, do I understand right, these rules above work with encrypted option in torrent client enforced too? I suppose, their blocking effect comes at announce blocking level (where we use dns block) and doesn't depend on all other options?

Thanks for your help and explanations. After disabling bittorrent_announce rule it started to block torrent traffic in some way:) I also corrected my DNS drop filter - use dstnat instead - seems to work as it should. One more question. Do encrypted torrent connections should be blocked too? Because,...

You don't need the "bittorrent_announce" rule as it is covered by the "Bittorrent" rule. Anything the Announce rule is flagging is a false positive (yahoo.com's front page will get flagged). You are right. Ok, I disabled bittorrent_announce now (btw, can you explain in detail, w...

Try to block clients from using "multicast peer communication" Unless you use Multicast in your network for video and so on it could be a good idea to block it. Perhaps this will help. May be you can tell me, where to do it? About DNS filtering..yes, I use it too. But it doesn't work for ...

TKITFrank, as I can see, DHT really doesn't work with your DNS filter rules, but peer exchange (through tracker I suppose) is working fine, receiving peers and downloads torrent files:( May be you have an advice for me.. PS If it's matters, I use Utorrent 3 (last release) with russian torrent tracke...

TKITFrank, did you try your rules with the last version of utorrent client(3.0 and above).Asking about it, because you rules, posted earlier in this topic, seems to work for me. But now, with the last version of utorrent, they don't. Neither with ssl encryption turned on or off.

Hello, everyone. I'm using Proxylizer Vmware image for collecting web proxy logs. Everything works fine except generating and sending reports by e-mail. If I check Recipient option while generating report it (i mean report) doesn't even being generated. On report's status page "In Progress"...

So what about this article? Are you shure, we don't need to put mangle rules in forward chain or use postrouting together with prerouting for correct L7 application? Will in this case those rules check the same packets twice? One more question. How do the mangles work? The same as firewall rules or ...

Well, i made as you wrote. As a result, I have all p2p connections marked and get them all into a p2p mangeled connection. But in my block filter statistic I've got only approximetly half of them blocked. And I don't actually understand why. Also, there is another problem. Some of the p2p connection...

Hi, Sorry for my late reply I am involved in a large project right now. Here is a little how to. You have to have defined your L7 before. Go to the Firewall Mangle. Create a new rule Set it as a prerouting chain and set L7 accordingly. Set Action Jump and Jump to target lets say p2p-traffic Do this...

I have troubles with blocking Utorrent client (version 2.0.2 if it's important). I use the rule shown above and when I look at my connections it seems so, that not all of bit-torrent connections are being recognized. It seems so, that connection having status U (means Unreplied) are not being recogn...

Hello. I'm using this scheme in my network. But I upgraded it a little for my needs. I have 2 groups of internal IP addresses. I need to set a priority for each group AND to give equal bandwith IN each group. As I understood, I can do it, using PCQ. So, I've got something lile this: ip firewall mang...

Any updates on the VMWare image and Reports? I have setup Proxylizer using VMWare Player on a WindowsXP machine. Database is populating fine. Report Generator is not generating reports. The database has been populating for over 48 hours. Still no reports. You can read my answer (the last one for a ...

Hello. According to this wiki article I can make direct download and download trough proxy limited to some fixed values with setting unlimited download via proxy cache. If I set up in this example max-limit equal to my download channel width will I get dynamic speed regulating depending on number of...

Look at /etc/syslog-ng/syslog-ng.conf file. You have to change permissions in the sections: #default owner, group, and permissions for log files #default owner, group, and permissions for created directories to 0777. After that restart syslog-ng or just reboot your VM. mysql.pipe is going to have 77...

Find some Windows analyzer that can read from syslog. There's Windows syslog clients, and the RouteOS web proxy (as per the Wiki posted above) can send log entries via syslog. Yes, I found Kiwi syslog.. Here it's told, that I can configure Mikrotik to send logs, for example, to Kiwi syslog. So I ge...

Yes, but Proxylizer is working under Linux only, and I need a Windows based analyzer. The VmWare image doesn't work too - it's recieving information using syslog, but it doesn't makes reports, and as I saw in a propriate topic - not only me have such a problem. So is there any other way to recieve i...

The same problem. Proxylizer just shows 0 in reports history. And one more problem - after reboot of mikrotik and virtual machine with proxylizer the last one just stoped to recieve any logs at all. When I refresh the status page the information isn't changing. What the problem can be (I tried the s...

There is such a question. I found here how to make traffic coming through WebProxy mangling and queing. But it's said that I need to make my proxy transparent. Is it going to work without transparent proxy? Also, I want to count traffic using Proxylizer. So I need a log files, that Web Proxy will se...

Hi there. As per http://wiki.mikrotik.com/wiki/Log /system logging action add name=file target=disk disk-file-name=log I'm using Mikrotik 3.20 and I don't have option "disk-file-name=" at all. So is there any way in this version to give a name to the log file and to get it on Mikrotik's sy...

Hello. I'm a newbie in Mikrotik, so I'm trying to resolve some questions. So, I need to have an ability to make some traffic used and sites visited graphs of my users for example once in a month. As I understood, I need to use Web Proxy function (or, may be, there is another way to do it - please, t...