But i have 3 nets, and i can use 2 filter on peer. Maybe i don't unerstand where this is doing? Can you be so kind as to show me an example of config?

Hello! Please help me to adjust load balancing for outgoing traffic. Have 2 ISP, each of them give us Full View. And have 1 Uplink from both ISP, totally we have 2 uplinks. It is necessary to adjust mikrotik so that the proceeding traffic was distributed between two uplinks in regular intervals, or ...

I have written not in the necessary topic?

Has made upgrade RouterOS with 4.6 to 5.0beta6. Architecture x86. The server was accessible 6-10 minutes, further icmp to it has stopped. On the monitor screen which has been connected to the server has seen constantly appearing inscriptions: Dst cache overflow Dst cache overflow Dst cache overflow ...

well, just tested: pcq-rate=20M pcq-limit=256 pcq-total-limit=20000 - and average rate in queue was about 19,4-20,1 Mbps

Thx a lot!

Code: Select all

/system check-installation
/system check-disk

Later. Because of users...

/ip firewall mangle add action=mark-routing chain=prerouting comment="Routing 10.70.1.0/24" \ disabled=no new-routing-mark="Routing 10.70.1.0/24" passthrough=yes \ src-address-list="Routing 10.70.1.0/24" add action=mark-routing chain=prerouting comment="Routing 10...

Probably it will be better to show ip firewall mangle> export?
And completely menu Queues?

Ok. Has made upgrade RouterOS on test router RB1000, now CPU usage always 100 %, except for several minutes after reboot RB1000. Did not begin to risk and do upgdare RouterOS on a border router. And yes, on border router RouterOS 4.10 says that /system hardware> print multi-cpu: yes And these sreens...

Here some information about hardware.

The maximum loading of the processor for a week did not exceed 20 %, operative memory too suffices. Problems begin in the evening and not at all clients. If there is no restriction of speed on download/upload that problems it is not visible.

Filter Rules - 35.
Mangle - 128 rules.
Queues - 90.

Hi all!

Whether the quantity of rules in menu Firewall-Mangle and Queues on MikroTik influences? Problems with a speed at clients Recently have begun, speed is not stable and does not reach declared in the tariff

try to increase pcq-limit and pcq-total-limit and see, whether it makes difference

Set:
Limit - 1000
Total Limit - 10000

Speed has not risen.

Greetings! The Problem with Queues, witch used Queue Types "PCQ_download-20M" and "PCQ_upload-20M". In practice 20Mbit/ps is don't ever be. Speed of downloading reaches only 14Mbit/ps. Upload much better, but not give all speed. From what to make a start? RouterOS v4.10 Architect...

I think, it's the same as http://forum.mikrotik.com/viewtopic.php?f=2&t=42971

Oh, my gratitude to you!

?.. (O_o)

I mean, i can see rules which don't exist, because they are early was deleted in the mangle. See screenshot.

Why RouterOS doesn't forget old rules which don't exist. Very inconveniently. Can it be fixed?

RouterOS v.4.6

Hi there! I ask the help in realisation of such scheme: http://img710.imageshack.us/img710/2828/mikrotikeng.jpg 1) Loading on interfaces ether1 and ether2 was half-and-half 2) BGP Multihop and a choice of the best way for Users with white IP-addresses + for Users behind NAT (if such it is possible) ...

up

Installing adapter before installing RouterOS was fine, adapter was displayed in the menu /int pri . But Installing RouterOS and next installing adapter i cannot see the new interface ether1. Why so has occurred and that will advise to make, that it to see? I guess this is my adapter Asus NX1101: sc...

Hello!

First time the problem was occured with firmware 3.25, then i do upgrade to firmware 4.1. But nothing changes. How can you help me?