Hi, to make it simpler. let's just ignore the static ip for a moment. I just want to route traffic to some public ip's over ISP 2. If I do it via static route, it works great. If I do it over mangle, it's slow as hell. I currently have about 10 dst-addresses where I need to go over isp 2. Having Man...

I have two ISP providers, one offering me a static IP. I want to use this static IP provider for servers where I need to have a static IP due to firewall restrictions. All is fine if I create a static route but I though I could create a firewall list and use mangle to keep the routing table less pol...

If anyone else is facing this issue, the solution is in this blog post I found: https://blog.linitx.com/load-balancing-multiple-internet-connections/ First thing to note is that by default, bridge interfaces were designed for transparently bridging Layer 2 traffic and therefore it is logical that th...

I'm fighting with this issue since yesterday. I have a DSL Provider to which I connect over PPoE, then I have a VPN Provider to which I connect over SSTP through which I want to route only some traffic. As an example I took one server and my laptop IP and set up a mangle to route the traffic through...

I just encountered the problem described here: http://forum.mikrotik.com/viewtopic.php?p=315010#p315010 Currently running RouterOS 5.24 As soon as the openVPN Client connects, the address is marked as invalid, pptp starts connecting again resulting in "could not add address: already have such a...

Thanks for the hint. The solution was a comment made in the thread you mentioned. The other trouble is that iOS "remembers" the encryption settings of a network (SSID) when it discovers it, and doesn't revise those settings if they have changed. So if you change the encryption settings, yo...

I seem to have some issues with wireless and iPhones. 17:33:52 wireless,info 68:09:27:D0:07:1F@wlan1: connected 17:33:57 wireless,info 68:09:27:D0:07:1F@wlan1: disconnected, unicast key exchange timeout 17:36:02 wireless,info 68:09:27:12:B4:D4@wlan1: connected 17:36:07 wireless,info 68:09:27:12:B4:D...

problem seems to be openvpn. fresh router start, everything works great. first openvpn client connects, ppp start using all the cpu and from here on it's game over. LE: something happened with the certs during sstp setup, the openvpn server config then had certificate: none when a client now connect...

same issue.
ppp is using all the CPU. I'm not sure if this started before or after playing arround with sstp any suggetions on how to fix this?

LE: seems like it stopped and I have a autosupout.rif file

I have a RB750G which was running Version 4.4, yesterday I wanted to upgrade to 5.7 but the end result is that I have a bricked router. The only LED shining is the Power LED. I tried holding the reset button but it doesn't start to flash. I also tried the other reset button under the rubber foot, al...

I was about to ask the same question for L2TP ... but fond the answer in the wiki. not sore if will help with your issue ... but worth a try: http://wiki.mikrotik.com/wiki/Manual:Interface/L2TP [admin@RemoteOffice] /ppp secret> add name=Home service=l2tp password=123 local-address=172.16.1.1 remote-...

I have folowing problem with a RB750G with routerOS 4.6 If I switch connect a device to port 3,4 or 5 I have packet loss and very very slow connections. If I connect it to the switch, which is connected on port 2 then everything is fine. Here is my setup: /ip address print Flags: X - disabled, I - i...

I also seem to have the same issue. Unfortunately I didn't notice it was the same issue and created a new topic: http://forum.mikrotik.com/viewtopic.php ... 07#p199607
Can someone merge the topics ?

unfortunately no lock with nat-t enabled. 08:26:53 system,info,account user admin logged in from 192.168.1.3 via winbox 08:27:03 ipsec 213.141.117.108[4500] used for NAT-T 08:27:03 ipsec 10.16.30.1[4500] used for NAT-T 08:27:03 ipsec 192.168.1.1[4500] used for NAT-T 08:27:03 system,info ipsec peer c...

I have successfully set up L2TP on my RB750G, I can connect when my iPhone is connected to local lan (rb ip: 192.168.1.1 iPhone IP: 192.168.1.250) If I switch of wireless from my iPone and try the same over 3G it doesn't work anymore. I have no idea what I'm doing wrong. Here my config: # mar/21/201...

a different solution would be to use a RB750G and plug in a external Wireless AP.
The RB750G should have everything I need, except Wireless. Any suggestions on which AP I could/should use?

I want to build my own routerboard router and though of buying following products: * RB433 * R52H * RB433U case * uFl antenna * 24V power supply The router should work as home/small office router, need OpenVPN, DHCP and a stable Wireless. Do I have all I need? Would this hardware work for my intenti...

got it now. I think the Problem is fixed with RouterOS Version 4.3 (http://forum.mikrotik.com/viewtopic.php?f=2&t=36978) This seems to be the problem. *) console - fixed logging commands: 'warning', 'error' and 'debug' were all using 'info' topic; The fix is to only setup a remote action for the...

unfortunately it still doesn't work. Config now looks like this: # dec/02/2009 19:05:21 by RouterOS 4.2 # /system logging action set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory set disk disk-file-count=2 disk-file-name=log disk-lines-per-file=100 disk-stop-on-full=no nam...

aaaa ok. got that from the wiki.
I will try it out and if it works I will also update the wiki.

I have a RB1000 set up with remote syslog. # dec/02/2009 09:55:57 by RouterOS 4.2 # /system logging action set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory set disk disk-file-count=2 disk-file-name=log disk-lines-per-file=100 disk-stop-on-full=no name=disk target=disk set...

thanks a lot, you just saved my night.

I would also prefer a native Mac OS App then to start virtual box or wine.
But it works nice with CrossOver from codeweavers

is there somewhere some more information available?
The idea sounds good and it would be great if I could use a routerOS powered router which would also act as storage device for my network (some Mac's)

ok I solved it. Got the routed setup running. My problem was that I got confused with ether1 and ether2. I was assuming ether1 is the internet poert and ether2 the local port but the wiki article does it the other way round. No everything works like a charm. LE: I have updated the wiki with some lin...

I have bought a RB 1000 and now I'm trying to set up OpenVPN. I followed the wiki (http://wiki.mikrotik.com/wiki/OpenVPN#Bridge_mode) and have a vpn to which I can connect but I can't ping or do anything else. This is what I have done to set up the OpenVPN server on the RB1000 /certificate import fi...