Dear Mikrotik, when are you going to have any decent distribution in the Middle East / United Arab Emirates? Your local distributors here either does not carry stock (Prologix) of most products - and others does not even answer emails. X-Concepts (former distributor) was not better. You make it very...

thanks

Hi,

i just upgraded from 4.10 to 4.13 on my RB450. Now my SNMP monitor is complaining that the devices SNMP OIDs does not exist. (Temperature and Voltage)

(No such Name - SNMP Error 2)

I have double checked the OIDs - and they have not changed.

br/

sorry for the long delay.. just wireshark :-) port 80 access from hulu. You will see some IP's that are used only for location check. I dont remember them on top of my head - but from the many... IPs you only need to route a couple of them via VPN. Then you are telling hulu you are in the states... ...

Normis - did you check the RB750 WITH power supply in the box - or without?

I have just blown a power supply in 42deg hot weather

it was the factory supplied 24v power supply - and now it delivers 19,5v - without load - and on load 7-8v.

Thanks - your wattage is that based on 12v?

do you know if Lenovo branded Sierra 3G modem works on the ROS?

I have one of them around here somewhere. Or is there a better and less power hungry 3G card?

i tried RR - but that was not good. what would you recommend? I have tried multi channel UDP streaming with file transfer software - and I can actually get about 6+ mpbs constant traffic from my server to here. But using VPN i max out on 700-800 kbps via MT on same network. When I used bonding - int...

Xconcepts and Alpha really that bad? i have bought a lot from xconcepts - and they have 0 tech guys. Only a desperate sales guy who is trying to learn about IP routing. Alpha - I have only bought from them a couple of times but their tech support seems a little better. They do have tech staff - but...

you should ask your distributor, they have it. hi Normis - that only works if the distributor is any good. The one we have in the UAE does not have a single person there who knows anything about Mikrotik. They are simple box-shifters. So whenever anyone goes there to get help - help is very limited...

Hi guys,

i would like to make my own 3G router and was trying to find out if anyone knows which combination has the lowest power consumption?

How about "underclocking" etc. How low can you go? and which RB would you recommend?

/Kasper

thanks for your help. I got it to work - but it was not a happy trial

combined speed was lower - and that seems to be due to available bandwidth jumping up and down on each interface due to ISPs "network management"

So next trial is a UDP based tunnel

thanks!

so do i create 2 x vpn login servers on destination - and then 2 x vpn client "devices" on remote host?

I have seen I can set a username - but no password. Will password come from the Secrets?

//

okay im trying to figure out how to set it up. I have now both PPTP and OVPN enabled as servers. questions: Since I cant use dynamic IPs on the interfaces - and the interfaces need to be created "up front" how is the best way to set it up? /bonding only accepts a valid interface name. You ...

Hi guys, I have a "funny" issue. It seems like my slingbox speed varies a lot... Scenario 1: Microtik 450G to x86 Mikrotik server - mangle rule - take all Mac (ip 192.x.x.15) traffic through PPTP Scenario 2: Mac PPTP to x86 Mikrotik router (through 450G) In scenario 1 - i get sling stream ...

thanks - will bonding work over x number of PPTP links? Load balance will not work since im trying to increase speed on 1 stream and thereby work around the ISPs limits- not multiple streams. has anyone tried? or have a short get started guide? :-) I have a MT on a ESXi as the "vpn" server...

thanks. :-) off to test! btw i do prefer a good book vs a number of wiki pages - but maybe that is just me. :-) I would happily pay for a beginners book in e-book format i could read/skim to have a better overview of the potential of Router OS. Unfortunately the only book available is hardcover/prin...

Hi guys, where I live they like to limit your speeds - and they even do it on VPN connections - so max transfer tops out at maybe 1200-1400 kbps no matter what I do but when I use "non-std" multiple UDP stream transfer software is able to reach close to full bandwidth. (on 16mb i can get a...

is there a windows driver that can take advantage of that A RS232 to IP box costs about $50,- so if I could get my weather station "online" by paying $10-$20 for a driver for windows (or even free) i would be happy

Hi guys, it seems like the default configuration for each different type of installation is different 1. RouterOS on RB450G - default creates a bridge - uses bridge+eth2-eth5 for private net 2. RouterOS on RB750 - does not create a bridge - uses eth2-eth5 for private net 3. RouterOS on x86 - uses ET...

The problem I had was: StongVPN gives you a public IP. That means you need to setup a SRC based NAT/masquerade on the VPN for the traffic to flow in and out. Then I use mangle rules to send the traffic out. Sending all the traffic out through the VPN would slow down your internet line. So now I have...

normis - thanks good i did not read your post before i got it to work. Then it would not have worked

Reset configuration

accepted default config for Ether1 (private net)
added Ether2 public ip

now it seems like it is working.

I have just installed 4.2 on my ESXi 4.0 server. Set HD emulation to IDE and installed perfectly Installed with 1 E1000 adaptor. Configured ip (public) and gw from console - seems fine. But no traffic comes through. Cant ping - nothing in arp table etc. Tried winbox from another VM on same VM switch...

seems like you have not given the external interface an ip address. here is what mine looks like Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 ;;; default configuration 192.168.25.1/24 192.168.25.0 192.168.25.255 ether2-local 1 xxx.xxx.245.x/30 xx.xx.245.0 xx....

I have now posted it as a Job on oDesk

http://www.odesk.com/jobs/URGENT-Router ... b1deaed381

i really need to get this to work so im ready to pay someone to teach me / guide me / fix it

best

Kasper

thanks was not it though

I have now limited it so only www.whatip.com will kick in routing through vpn - 74.208.23.0/24

But still my PPTP shows hardly anything comming in - but quit a few packets going out.

So outbound I think is fine - but problem is nothing is comming back.

will do

Hi, im trying to setup a Route to a PPTP provider - only routing VoIP related packages. right now im trying to get it to work with HTTP first and then change to SIP protocols when I know what im doing :-) But I seem to hit a wall. :-) I have created the interface (pptp client) and can login - defaul...