MikroTik

drfunk89

Thanks, i'll do some testing! I didnt imagine it was a Mikrotik problem just thought i'd double check...

drfunk89

Yeah your right, it goes 192.168.0.0/24>>>>>>>>>>192.168.0.1-----Mikrotik-------192.168.100.1>>>>>192.168.100.2>>>>>192.168.2.0/24 I did routing through using that rule you said. Didnt work. Would there anything on Windows i would need to change, ie. Internet Connection Sharing on the 192.168.100.2 ...

drfunk89

I have one Mikrotik, one set of computers on a 192.168.0.0/24 network plugged into one interface and one other computer plugged into the other interface of the MT on a 192.168.100.0/24 network. The second single computer has several OpenVPN servers running on it accepting multiple incoming OpenVPN c...

drfunk89

Cool, ok i thought i might have to do this...i suppose this way i could set up routes to route traffic for the remote vpn subnets through eth3 (for example) that right? Would Windows stand in the way again? Like i said about only be able to share one connection at a time? Ideally i'd like the routin...

drfunk89

Hi i have a problem with Windows that may be solved by using a Mikrotik. I have set up a computer at work to accept multiple OpenVPN incoming connections, each with a separate virtual adapter. The machine is sat on the same network as the rest of the machines in the office and i need everyone else i...

drfunk89

That sounds very good but complicated for a beginner!
could you elaborate on your last point please, creating the filter rules......how do you specify IP addresses they can see?

drfunk89

MT forum can you help me please, i have the idea of what i need to do but putting it into a firewall rule is a little more tricky! I basically want to limit PPTP user "John Smith", when he VPNs into our network, that he will only be alllowed to ping/"see" a certain range of addre...

drfunk89

OK narrowed it down slightly, can now ping fine (took outgoing interface off the masquerade rule), its just the outgoing VPN is still not working! NAT 0 chain=dstnat action=dst-nat to-addresses=192.168.0.2 to-ports=987 protocol=tcp dst-address=81.149.77.68 dst-port=987 1 chain=dstnat action=dst-nat ...

drfunk89

We have a problem with out MT blocking pings from inside our LAN to other networks via VPN, etc...
We can VPN in fine and we have a guy sat in South Africa VPN'd in and he can ping back out which suggests it our LAN not being allowed through the MT...Any ideas?

drfunk89

Ok, i've got a bit further, at the moment there is a draytek sat on 192.168.1.1 and the MT sat on 192.168.1.66, lan side 192.168.33.1. I can ping through to laptops etc on the 192.168.1.x side but they cannot ping anything downstream of the MT on the 192.168.33.x range, can anyone help with rules an...

drfunk89

Thats a good point...

Whoops!
I just know that i did it well using our office's static ip from the ISP, however i'm not sure if the customer has a static Ip or not so i was wondering how i could replicate our setup but with a dynamic IP

drfunk89

One of our guys who is trying to access another offices VPN is using a Windows XP laptop, they can connect to the VPN fine via a mobile broadband stick, but as soon as they plug into our network, it hangs on connecting and then just fails, this is why i'm thinking its something i havent done properl...

drfunk89

Got the incoming PPTP working brilliantly, except we cant make VPN connections going out the office!!!
Any ideas???

drfunk89

I'd like to use the MT as a PPPoE client and dial out to the ISP, is it possible to assign a dynamic address, if possible, to the physical public port of the MT, using something like DynDNS.org??

drfunk89

This week i'm setting up a mikrotik router solution for a customer of ours, so i'm testing their topology on our Mikrotik in our office. I've got WAN on eth2 and LAN number 1 out on eth1, i've put a laptop on eth3 just to test if i can ping from LAN 1 to LAN 2, LAN 2 wont need internet access just b...

drfunk89

Will do, just out of interest, my public IP is xx.xxx.xx.xx and the lan address of the phone is 192.168.0.23, what rule would you make to allow it do talk to the external SIP server....any help appreciated!
Thanks

drfunk89

Ok, erm, the phone gets assigned DHCP info from the SBS 2008 rather than the MT (which interestingly it wasnt able to receive DHCP info from the MT until we installed the SBS 2008). It is supposed to boot up recieve IP address, contact the SIP server and receive calling info and all that. However it...

drfunk89

Sorry i might need to re-phrase that, its the ONLY IP Phone in the office so i was wondering whether anyone had any MT/SIP/IP Phone issues!?

drfunk89

Have setup a MT in an office fine, SBS server 2008 is the DHCP and everything is ok apart from one IP Phone, no matter how many ports or what firewall rules i apply, nothing works, it worked in the setup previous to the MT so i'm guessing it must be MT related!?
Any ideas anyone...

drfunk89

Yeah i've opened all those and enabled gre 47. Still not working, no idea whats going on, dunno if its the MT or the SBS, if i try to establish a VPN connection, it "connects, starts, authenticates" then it drops out, i can see a new PPTP interface pop up but it then obviously disappears.....

drfunk89

Thanks, that was helpful, all up n running now, SBS is the DHCP. Just one more thing can you give me an example of how to forward the ports 25,80,443,987 and 1723 to the server address 192.168.0.2 I've tried a few combinations with dst-nat rules but i cant seem to get it working... :( Thanks in adva...

drfunk89

Just wondering if anyone has successfully setup a MT with Microsoft Small Business Server 2008?
I'm having loads of problems with the internet connection wizard clashing with the MT and DHCP problems!
Just wondering if anyone has had a similar situation and how they resolved it....

drfunk89

Thanks very much!
Hope you found it interesting!

drfunk89

Took me a while but got there in the end, new wiki article up...http://wiki.mikrotik.com/wiki/PPPoE_With_2Wire_Router Not really sure how to navigate to it from the Mikrotik Main Page, dunno if its in a category or not?? Bit new to this, anyway happy reading, please make edits or post comments, woul...

drfunk89

Thanks for helping out a complete beginner!!!

drfunk89

Sorry but i'm being completely stupid, how do i create a wiki page!?

drfunk89

Yeah will do, there was alot of trial and alot of error!
Will put a wiki together and post the link up!

drfunk89

Ok, everything is working exactly how we wanted it. Just a step by step if anyone finds it useful to configure a 2Wire modem/router and a MT router: 1. in the 2wire, goto Broadband>link config> change parameters to Bridged LLC, untick PVM, and connection type set to Direct IP or DHCP, disable routin...

drfunk89

Thanks very much for a extremely knowledgeable explanation, i tried to do the "half bridge" mode yesterday and ended up locking myself our of the BT router because i followed instructions on another website about removing "routing" and putting it into Bridged LLC or something, wh...

drfunk89

Wow thanks for reply, we have one static ip address, probably why i'm finding it hard to setup an IP camera to view over the internet! Frustrating...So you are suggesting taking the DMZ off, what would be an alternative.....At the moment, i have the BT giving the MT a 192.168.1.98 address (by the BT...

drfunk89

So from reading that link, it makes alot more sense now, i would set a DMZ in the BT router to route everything to the MT and let the MT distribute the traffic...would i specify the MT's router WAN interface address in NAT & Firewall rules or the ISP's public static IP address??

drfunk89

Thanks!
That would have been so much easier if I'd of found that before setting everything up! Whoops...

drfunk89

Hi everyone :) , Very new to Mikrotik and have been given the task of setting one up into an existing small office network :? with a 2wire Bt router. I've setup basic internet connectivity and the wireless on the MT, i've also read lots and lots of forums and manuals and the MT Wiki, but i'm just in...

Search found 33 matches

Re: Mikrotik routing through to VPN

Re: Mikrotik routing through to VPN

Mikrotik routing through to VPN

Re: Possible use of a Mikrotik

Possible use of a Mikrotik

Re: Limit PPTP user to only see a range of IP's

Limit PPTP user to only see a range of IP's

Re: Cant ping from LAN

Cant ping from LAN

Re: One MT 2 Networks

Re: Dynamic IP address on Public Side of MT

Re: Outgoing VPN

Outgoing VPN

Dynamic IP address on Public Side of MT

One MT 2 Networks

Re: IP Phone!

Re: IP Phone!

Re: IP Phone!

IP Phone!

Re: SBS 2008

Re: SBS 2008

SBS 2008

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

Re: BT router and MT help....

BT router and MT help....