hi all,

how to block ultrasurf ?

thanks for u help

hi all, i need your help, how i can block manual proxy on mikrotik?
when user type manual proxy on their browser, like this one 163.221.11.71 port 3124, the user will pass the mikrotik block

how i can block that manual proxy ?

thanks

PCQ fires on packet marks. In the example all traffic gets a traffic mark. Adjust that to only mark packets that came in from the interface facing the Internet, for example. You may also want to Google and read up on QoS applied to inbound traffic and check that what you're expecting matches with w...

have you read the wiki ? start at this : http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ_Examples ant this: http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ that will do the job. i am already try that PCQ examples too, but when i am copy file from local folder the bandwith is limited too, i am j...

hi all, i am newbie here..

how i can limit download from internet to user on mikrotik..?
i am really need help all..

thankss

Code: Select all

/ip firewall filter add chain=forward action=drop dst-address=a.b.c.d

Refer to the manual for details

thanks bro, i am already block my facebook

Yes, those four ips. Block port 443 for https.

can you show me how to block using command line please..?

thanks

proxy doesn't work with HTTPS sites, you need to find out the IP addresses that Facebook uses and block them with the firewall. This should be a start: C:\Users\Normis>nslookup facebook.com Non-authoritative answer: Name: facebook.com Addresses: 69.63.189.16 69.63.181.11 69.63.181.12 69.63.189.11 s...

you must use transparent proxy, then you can block sites by host name http://wiki.mikrotik.com/wiki/How_to_Block_Websites_%26_Stop_Downloading_Using_Proxy i am already using proxy on mikrotik, i can block http://www.facebook.com, but i can not block https://www.facebook.com. i want to block https: ...

hi all, i want to block https://www.facebook.com,
how can i block that..?


thanks

Post your IP, interface and routing configuration.

problem already solve bro,
thanks for your help.

i have mistake on my network card.

hi all, i am newbie here, i have some problem with my router RB 750, why when i am select MASTER PORT = none on ether1 (192.168.1.1) i am can not ping to my router on ether1 (192.168.1.1). I am select MASTER PORT = none , because i don't want my router as switch. and how, i can ping my router, if i ...

Hi,

I want to ask if anyone installed untangle behind mikrotik and working correctly?

My network setup like this

hi all, i have a problem with my router.
how i can divided 2 internet line in my router?

It's because you can't use the same subnet for both of your router's interfaces without proper configuration. thanks bro for ur commnent, but, in eth0 router, my ip address is 192.168.103.1 and eth1 my ip address is 192.168.104.1 and how i can configure in switch A always using subnet 192.168.103.1...

hi all

i am need your help..



how in switch A, a computer always using ip segment 192.168.103.1,
if a computer in switch A change the ip segment like 192.168.104.3, he or she cannot ping to computer in switch b (192.168.104.2)

need your help bro...

by the way, can i block mac address in mikrotik, using firewall filter..?

thanks guys..

by the way guys, how i can block connection between Client A. 192.168.1.2 and client B. 192.168.2.2, but client B. can connect to client A. omg!.. http://forum.mikrotik.com/viewtopic.php?p=181694#p181694 thanks bro.. i am release must used "connection-state=new" thanks bro... by the way, ...

i mean, client A. 192.168.1.2 can not see shared folder in client B. 192.168.2.2 but client B. 192.168.2.2 can see shared folder in client A 192.168.1.2 if i used this code : /ip firewall filter add chain=forward src-address=192.168.2.2/32 dst-address=192.168.1.2/32 action=accept /ip firewall filter...

/ip firewall filter add chain=forward src-address=192.168.2.2/32 dst-address=192.168.1.2/32 action=accept /ip firewall filter add chain=forward src-address=192.168.1.2/32 dst-address=192.168.2.2/32 action=drop is it working?!? I would add 'connection-state=new', because if you simply accept one dir...

thanks all.. my problem solve..!

in that case, their connections are not going through the router at all, you can't control them.

if the connections are going through on the router.., how i can control them..?

how are these clients connected to the router? are they wireless users, or lan users connected through a switch?

lan users connected throungh a switch

i have 2 lan card in my router, A. 192.168.1.1 and B. 192.168.2.1

please help.. i am newbie here..
hehehe

how to make rules like:

Client A. 192.168.1.2 can not ping to client B. 192.168.2.2 but
client B. 192.168.2.2 can ping to client A. 192.168.1.2


please help.. guys..