Let me see if I understand your question correctly.....You want to be able to connect to your WISP on every PC but you want to be able to use your own IP pool. You may have some problems doing this. It will first depend on the number of PPPoE connections your WISP allows you. When you do connect usi...

Here is a link to a POE switch that can do 0VDC, 12VDC, 24VDC, and finally 48VDC.

http://www.inscapedata.com/lps.htm

Take Care

Thank you very much for helping out.....Now I will give it a try.

I am going to use port 1 on the RB750 to connect the routers and that will help with the trunking. How would I connect port 2 on the first RB750 to a PC and assign it to the VLAN? Anybody else have any thoughts about it?

I am trying to set up a management VLAN across 2 RB750s and I have some questions. I am assigning this VLAN 85 but now my problem is how to apply this VLAN to a physical port on the router? Then how would you trunk these VLANS between the two routers? I read the wiki but it didn't really help me to ...

Could you post your IP routes so everyone can take a look at it? You may also want to tell us what port you have connected to your PC and the WAN.

It sounds like you may not have a default route created. You may want to take a look at your routes to make sure that you do have a route created to the outside world from your router. Where are you able to ping the modem from? Is it from the router (Telnet or winbox) or from a PC connected to one o...

I am sorry for the delay in response but thank you for the information.

Is there a way to limit access to routerOS to a particular VLAN and block all other access to it? If so how would you do it?