I should have been more clear. I want to configure ECMP over my current OSPF links.

I have a router with 2 links back to our Data Center. Both links are 18 Meg, but with the current setup I am preferring the link with shorter cost and the other is a backup. What I would like to do is utilize both links 50% ( or as close as 50%) and if a link goes down then route all traffic out it ...

I have a customer that asked me to provide them a Layer2 Ethernet Handoff at Location A and Location B for transport purposes. Our network is as follows: Location A ----> RB1100 ----> Cisco 7206 --------OC-3--------> Cisco 7206--------->Mikrotik x86-----{100M wireless Link}-->RB1100----->LocationB I...

We are in the process of going with a SONET solution as opposed to our Current ATT ATM Network. Are there any cards that will work with mikrotik that supports OC3 and DS3 vi Single Mode Fiber?

I am a WISP and have the following setup: Mikrotik Border Router | | | Mikrotik 493ah @ Tower -Eth 1 Connected to "Border router for Internet" -Eth 2 Connected to Access Point 1 -Eth 3 Connected to Access Point 2 My question is if I have customer's say on Access Point 1 and Access Point 2 ...

I know somebody on this list is using Mikrotik for a wireless AP and can answer the questions I posted?

Joe

We have an DLB 2700 w/ omni in the field for one of our broadcast sites. There are approximately 25 customers on this AP. Each customer is using a different brand of WiFi equipment from Deliberant, Proxim, YDI, you name it. I am needing more control at the access point level bandwidth control, firew...

I have a scenario where I need to export all the IP's from ether2 to a file? Something similar to this put with an export command:

pr file="Ether2" where interface="ether2"

The above yields a text file with the IP's but I need it where I can import it to another router?


Joe

I have an instance coming up where I will need to take down my billing software for maintenance. For my Dialup Users I can login and tell the NAS boxes to allow anything to authenticate. Is there a way to tell my Mikrotik to allow any PPPoE users in while I am working on my billing software?

In the manual it states: Security issue: do not assign an IP address to the interface you will be receiving the PPPoE requests on. What type of security issue would there be if I need an IP on that interface for cutomers who do NOT run PPPoE and use static or even a DHCP relay on that Interface? Joe

We have a filter rule setup to drop invalid connections. I have a client that can NOT ping a server behind the same interface as he (Different IP Ranges) when I have the Drop Invalid connections ENABLED? When I disable this rule it begins working? Can someone explain what the "invalid" con...

Do you think this hardware will work for us?

Intel Motherboard S3210SHLX Intel 3210 LGA775 FSB1066MHz 2DDR2 SATAII PCI-E Dual GbE LAN ATX Intel CPU Dual-Core Xeon 3085 3.0GHz FSB1333MHz L2-4MB LGA775 65nm Retail 2 x Intel Network Adapter EXPI9404PTBLK PRO/1000 PT Quad Port Server Adapter PCI-E Bulk 2GB kit (1GBx2), 240-pin DIMM, DDR2 PC2-5300 ...

We have several Orinoco Ap500's and Orinco 1000's. I am needing to replace some of them because they are old and out of date. I have an area with about 20 customers that all I need is an AP and POE, I have the Antenna. My question is what do I need or "What is the Part Number for an AP"? -J