MikroTik

mcozio

Hi, is it solved yet?

MT v7, OSPF, a dozen of subnets, at least 30 routers, I would like to use UM to authorize PPPoE around whole network,
At the moment I use local PPPoE server with secrets

mcozio

mismatch with vlans configuration, re-created vlans based on PVID and seems to work.

mcozio

do you know how to solve it? mt v7.14.3 both sides backbone-v2 { version: 2 router-id: 10.255.1.253 } backbone-v2 { 0.0.0.0 } interface { p2p 172.16.10.185%vlan201-xxxxxxx } dropping 4 from 172.16.10.185 - unknown neighbor or backbone-v2 { version: 2 router-id: 10.255.1.253 } backbone-v2 { 0.0.0.0 }...

mcozio

well, you should take a look on ellacoya e30 switch to manage bandwith,
It has almost all possible traffic - p2p, skype , voip, sip - more then 200 possible kinds etc, mayby MT should have something similar

mcozio

http://85.255.179.2/mt/

"pakiety" means packets (pl)

p3-1ghz and p3-933mhz, 192mb ram, cpu 100% during the bt-test

I tested also mt3.0beta10 with 2x core2duo, 512mb ram about 77-88mbps (tcp/udp with preamble compression)

mcozio

you can try to set vlan on eth, not on wlan card/

vlan--------------------------------------------------------------------------vlan
lan-eth/RB or PC/wlancard --any kind of link--wlan card/RB or PC/eth-lan

mcozio

take 2x core2duo, 512mb ram, 4x wmia123ag, nstream2 , 5g-turbo - score - 77-80mbps full duplex, mt 3.0beta10 tested

mcozio

I did a 77-80 mbpd fdx link with 2xcore2duo, 512 mb ram and 4x wmia123ag
mt 3beta10,indoor,,ns2,packing policy, framer limiter etc.
in bt test I got cpu at 60-70%, so enough power to tx/rx more

so why not take 6 card each side, mt 3.x, and also core2du cpu ?

mcozio

tcp or udp, almost the same score

mcozio

give more information, you use pc or rb ? print you registration table details from all points

mcozio

well, I tried this - ns2 and bonding 2x2 to compare http://wiki.mikrotik.biz/wiki/index.php/Agregacja_%C5%82%C4%85cz_%22Bonding%22 It is taken from manual and you should read this http://wiki.mikrotik.com/wiki/Super_wireless_test In one word: with a pipe built with 2-3-4 mt oraz cards each side you ...

mcozio

2x pc - core2duo
4x wmia123ag, 5g-turbo
nstreme-dual
mikrotik 3beta9
nstreme with pooling , framer-policy best-fit or exact-size (no diff.) framer limit 4000
77-80mbps full-duplex, cpu ~65-70%

mcozio

why not, I just have to find a good idea to take a shot of the movie.

mcozio

nstreme-dual, 2x core2duo, 4x wmia123ag = 70-80mbps both way, 5gturbo
if add one more card each side we can get over 100-110mbps

mcozio

eoip on rb532 or pc to get more than 20-30mbps

mcozio

p3 or p4 , intel-based
if ap ~ 400mhz
if ptp over 1 ghz
if ap+bridge over 1,5 ghz
with 256 mb ram

mcozio

eh, wimax - 2x14mhz = 60mbps, IP traffic 40mbps - cost for link p-t-p about 10-15k $, license for this speed next 7-10k $ per year. In poland, 1 city over 100k citizents if more then 100k

compare with mt:
linkt with ns2 - 54mbps fd, cost about 1-4k depends on ideas

mcozio

when mt will support wimax (802.16XX) rfc or just bands 3,4-3,6 with 3,x-1,75-3,5-7-14 step mhz channel setup ) ?

mcozio

I work in a company that offers equpment to hfc and also a wimax lately. ex. cambridge broadband networks - vectastar3500 I talked with my product manager to offer mikrotik for 5ghz as a last mile to end-user, but we still have to use 2 systems - this CB and MT - If mt would support wimax (3,4-3,6 g...

mcozio

Well, in poland you have to buy a license to use 3,4-3,6 band and it is not cheap if you want to have more then 10mbps throuput, So I don;t see a point to change 5ghz to 3,5ghz

mcozio

to use wimax in poland with these cards they will have possility to set channel width
1.75, 2.5, 3.5, 5, 6, 7, 10, 14 mhz
I don;t see it in tech doc. just 5,10,20,40 mhz step

mcozio

is it always 11/1 ?

mayby user doesn;t use it at the moment, just reading the www, ask him/her to turn on p2p and watch

mcozio

wimax is late, about 5-7 years to be on the top,,in Poland you have to pay for channels, and won;t get more than 16mbps - law. I will stay with MT and 5ghz - nstreme2, bonding about 100mbps :D

mcozio

on every ap you can mark and set queues for each services and max speed : www prio 2,mail prio 3 ,dns prio 1, p2p and other (inc. p2p not marked by mt for example bearshare) with prio 8

mcozio

why not pre-paid with sms , and then a deamon puts a command line into terminal to setup access for this user ?

mcozio

if it is a pure ap for users about 2-3 cards, if a bridge p-t-p 1 or 2 for good speed. CPU works worse if it has to put 2 processes - divide power for two cards - 5ghz takes more than 2,4ghz to support good link. Look at post "65km" and this what marksx wrote - p3-1ghz point to point - 80 ...

mcozio

1pc and 5 card - will not work with speed you want to reach, I got p4 2,4 ghz with 5 cards and effect - 2-3m mbps each at traffic time ..

mcozio

sr2 and sr5 have bad sensitiveness, try to put normal atheros 5213 card , I tried TP-LINK WN-551G PCI and got -58 , for example with prism 2,5 3com oem / tonze I got -70/-75 300m to client, apc with panel antenna.

mcozio

and where is info about 5ghz insted of 2,4 ghz ? I am still waiting for it

mcozio

try to ping it all the time with watchdog to have pockets in the air

mcozio

galaxynet - I just told about ack, not about it is set manually - too good signal may cause problems - it should be about -60, next thing - are there any others AccessPoints in 2,4 ghz ? if you have cm9 card - it take about 15min to built 5ghz antenna from beer can :) I tested a link for 7,5km - one...

mcozio

2,4 ghz ? why not 5 ghz ?

you have ack too big for 1,5 km, it should be about 50-70

try to set speed rate 6/36 mbps insteded of default

and ping IP not mac

greetings,
mcozio

mcozio

over 5ghz so 10ghz and more it is hard to buil long-stable link, becouse of wether, temp - can not allowed to use it... With frequency distance is lower.

mcozio

how much does it cost this card? where can i buy it in POland ?

mcozio

default forwarding - off
default authentication - off
add users to wireless table and also set off default forwarding to all added users

Search found 35 matches

Re: UserManager in CCR1036 ospf LoopBack dont work.

Re: OSPF

OSPF

Re: Mangle Feature Request

Re: Help - NStreme2 terrible throughput

Re: VLAN's on wireless link with Nstreme

Re: Bonding or dual nstreme asking for suggestions/recommendatio

Re: 25Km 125Mbps FDX Link

Re: Wireless 45-50 Mbit tcp fdx

Re: How do you optimize a PtP link?

Re: 1.5km link 108mbps

Re: Wireless 45-50 Mbit tcp fdx

Re: Free Level6 license to anyone...

Re: 1.5km link 108mbps

Re: What is a better transparent bridge to 50Km?

Re: what motherboards works with router os

Re: wimax

Re: wimax

Re: wimax

Re: FCC Releases 3650MHz

Re: FCC Releases 3650MHz