MikroTik

zain

I have a nano station connected to a mikrotik ap at signal strength of -82dbm for months it was working well suddenly last night it stop releasing dhcp any idea why? My isp says that all other clients can browse on it well it’s just me I tried different nano but same thing occurs?

zain

Hi guys i have downloaded the free trial mikrotik os i have setup the dhcp ip address on my ether1 got the dhcp running but it want release the ip to my vmware lan cards so that i can login into the mikrotik os via winbox please view the screen shots bellow and tell me what i am doing wrong... thank...

zain

right sounds good does mikrotik have something to focous on cache only ....

zain

nowhere... close to where i am going... unfortuntely besides from lativa i will see how i can make it their.... :D thanks normis one more question the cache option is only on some routerboards right is 4gb or 8gb enuff to cache the internet does the mikrotik cache system cache just like the squid ca...

zain

Normis what do you suggest I do... their isn’t a training centre in Malawi Africa do you have any training centres in Europe... I will be flying their next week and would like to take the opportunity of getting trained.

zain

Sorry if this a dumb question but I just wanted to know if its possible regards zain

zain

Oh right cool anther thing umm I wanted to do a trainning coruse on mikrotik but I don't think the services are avilable in my city so can I do them online ?

zain

Whenever I try to send a private message to a use why can t I send it it says you can t send private messages..... On the forums

Regards

Zain

zain

For sure man its a pain in the back side trust me makes life very hard lets see what the future holds for this place.... but it was intersting talking to you man.. got alot of knowledge for sure.... thanks alot...

zain

it was just a thought cost alot of money yh even these seacom boys who have invested so much they not giving the top of services which makes their service rubbish the satliate company gives a better service via mikrotik wifi its neva down i am always browsing but unlike other companies their down at...

zain

well we have one isp in malawi the only isp running optic fibre now they are connected to a ring of optic running awnd africa and i think they buy 100mb bandwith for the entire country and they are very un-reliable as their cable is cut most of the time so on and so forth running optic in the city d...

zain

right that i understand now so how do these isp's in europe work how do they get such reall fast internet we are connected to the optic link as well seacom and buying 100mb from them but still our internet is sold in bits instead of bytes they say 1mb dedicated is 15thousand usd what would be the be...

zain

u see its a one of payment i could buy worth 3 thousand us bandwith and download the entire web in three months with that high speed broadband and then have a 2 mega link jus updating the servers well thanks it was just a thought due the net is so slow downloading a 700mb file takes 24 hrs fustraded...

zain

Is it possible to download the entire web and store it on servers then clients can browse locally then using up internet bandwith a big pipe of internet can be pumped to keep the local servers uptodate with the internet.... For instanance i live in malawi and our internet is so expensive people can ...

zain

cool i thught i shuldn t post onther thread might spam the forums but yh umm thts cool man thanks alot

zain

not reselling it making a link so when i am at office or home i can use it both places then paying the isp twice also did u check out what i am trying to do with 3 12dbi omini anntennas would that cause a interference conflict? and also if i wana cache my browsing do i need a board with a sd slot or...

zain

also if i had three of these on one pole differnet directors would that make singal drop or interfer with each other http://www.miro.co.za/detail.aspx?pid=269&p=Wireless&sp=Antennas%20-%202.4GHz%20(802.11b/g)&spp=Omni%20Directional am using the r52hn cards would they able to shoot up to ...

zain

block the internet link thinking i am sharing their link but if i put it via onther router then they want able to sniff the router if i am right ?

zain

hi guys....

i have a mikrotik connected to my isp who's releasing me dhcp... now i don t want my isp to be able to sniff my mikrotik how do i stop the mikrotik from being sniffed i should be the only one to login with the dhcp ip released?

zain

sorry got busy tryna figure out stuff b4 i go ahead with a conlutant i made few tests and found out direct from the lan port where the internet is coming i am also getting 10kbps so does that show that the isp is not provding enuff speed?

zain

tried that similar results tried downloading a small file like 2 mb and it was taking 5 mins to download or more mikrotik graphs show Max In: 35.25 Kb Average In: 13.57 Kb Current In: 27.92 Kb Max Out: 156.90 Kb Average Out: 65.65 Kb Current Out: 139.06 Kb does that show my pipe is 35kbps ?

zain

sure how do i get that in malawi could you please advise any one in my area who can do that for me? ready to pay.

zain

whats ur advise? what u wana login to mikrotik or the ubnt's?

zain

fwei my transfer rate is ova wifi tht is Download Speed: 125 kbps (15.6 KB/sec transfer rate) Upload Speed: 40 kbps (5 KB/sec transfer rate) Ping test shows 4% packet loss ping 109ms jitter 101ms grade d concerning most online app will not perform well but should function in some capacity test to ot...

zain

now when i do a speed test its saying latency test error and the the ping test just jam's up

zain

according to me it seems fast but let me explain how i have set it up my internet comes from a local isp 128kbps via optic i get it from a ethernet switch i have run a lan cable to a mikrotik rb433 port 1 i am getting 100mbps full duplex i can ping google etc my public ips etc so from port 2 i have ...

zain

what do you mean by large amounts of latency ? how could i slove that sorry just to get info faster i tend to ask as your explantion is faster to understand then google search

zain

hi guy i wanted to know from my internet switch when i ping google i get the ttl 47 time 589ms and 64 byte ping when i ping ova the network wifi i get everything the sme only the ttl is 46 and the byte ping is 32 byte does that slow down my internet bandwith from below? i am buy 128kbps when i do a ...

zain

How do i test if i am getting the bandwith i paid for i have bought dedicated 128k/128k and two users on the network on the queue its showing each user is using Tx:80kbps and Rx:992bps but am downloading a driver and i am only get 7.2kbps all my downloads are very slow the port that is bringing the ...

zain

logs had nutin before and now cause nutin is going wrong their isnt any singal for it to show anything or any1 trying to associate

zain

well i noticed that the omini anntenna broadcasts at the tower but when i come home i can t pick up the singal the card is good the pigtale is good the coaxil cable is perfect the omini is brand new tried 2 different omini's my home is less the half k away

zain

for sure man it is a microsoft idea well i was short on time i needed it back up basically i could search the singal but it wouldn t bring up the singal bars for some reasson

zain

well i just ended up reseting the router both cards showed but one card was showing two bars low singal etc without connecting to the anntennas when i went and put it back on the tower one omini one sector the omini works fine but the sector shows very low singal fromcoaxil cable is fine pigtale is ...

zain

i have 2 ap's running on a rb433 now both were working fine till yesterday but now when eva i try to connect to them they will not bring any singal to show they are connected sometimes one will work and the other will not why is this?

zain

i checked them on ground does the same thing i took them up myself one board which was working on the ground when i took it up and powered it up direct dc the green and blue light just got stuck but after a while of powering looking at the board etc i saw that their 8 jumpers on the board now two ju...

zain

direct dc power on top 12 volts

zain

i have two rb433's one was working fine todai went to put it on the tower and it powers up but the green and blue light just stay on it doesnt beep and i have onther rb433 which beeps but lan ports don t work what could b the issue

regards

zain

thanks in advance

zain

ok cool

zain

seems to be working thanks alot how do i giv that certian ip unlimited traffic like unlimited speed also please adivse is tx download or upload and rx upload or download cause tx always showing high traffic lik 150kbps 90 kbps etc when the link am pumping is juz 128kbps for now

zain

hey fewi i managed to block torrents p2p by blocking torrents wwws and dns in firewall but now i blocked all p2p's how do i juz unblock my mac to download p2p please advise

zain

hi guys i have got the link working i can ping the public ips dns etc google etc on the mikrotik without ping time outs but when i try to browse its very slow the net? my singal strenght of connection is -76 dBm p throughoutput 4441 kbps tx/rx singal strenght 76dbm and singal strenght 86dbm could it...

zain

one more thing fewi what if the lan port is on connecting a lan cable almost 70 meters data cable and it show's connected on the mikrotik and the internet switch below what if i can t ping the ip could it be the cable has a issue even tho the lan lights are on the mikrotik board? because i just put ...

zain

this is what i have done please advise by click on the image links

zain

thanks man i will read it and get back to you

zain

well the logging is enabled please guide on how to enable debugg logging when i check the logging in the next moring their's no logs.

zain

ok but i have onther issue now my internet works fine for all day till 2-3 am in the moring and the rb750g just off's its self then i have to go remove the internet cable which goes to the eth1 and it goes back on then i have to wait for all links to be stable and re-put the internet link it works f...

zain

understood that sir sorry am abit slow at catching the scenrio you gave was to enable the certian computer to be allowed to get p2p but first i need to block all clients from using p2p which i havent done and need your assitance in how to do it. please advise i have allrdi added a firewall for 192.1...

zain

so you mean the internet ip right? like my ip and the internet gateway ip like example 45.331.99.209 255.255.255.0 45.331.99.208 so ip firewall filter one firewall rule:-different add chain=forward src-address=45.331.99.209 action=accept add chain=forward dst-address=45.331.99.208 action=accept Sepe...

zain

Well i have a routerboard rb750g eth1 has internet pumping into it with its public ips then i have made a dhcp linking to eth2 to eth5 giving my ap's dhcp to clients now i want to block all dhcp released to clients to not download any p2p accept from browse msn and direct download and i just want on...

zain

Well i have a routerboard rb750g eth1 has internet pumping into it with its public ips then i have made a dhcp linking to eth2 to eth5 giving my ap's dhcp to clients now i want to block all dhcp released to clients to not download any p2p accept from browse msn and direct download and i just want on...

zain

please advise which address do i put their the public ip or the dhcp gateway?

zain

ok thanks for the help i wil juz get some to physical explain it to me i will understand better thanks alot

zain

what do you mean by that am not good at mikrotik could you ssh in and see how to go round it ?

zain

hi guys if i use this command do i tend to block p2p for all users

ip firewall filter add chain=forward p2p=all-p2p action=drop

and is it possible to give certian users access to p2p?

please advise

regards

zain

thanks in advance

zain

i have lost hope now i tried a 3 core heavy shelided cable its doing the same thing the mikrotik board only works on 10mbps ?

picture of new cable http://img810.imageshack.us/img810/9528/image0051.jpg

zain

i have lost hope now i tried a 3 core heavy shelided cable its doing the same thing the mikrotik board only works on 10mbps ?

zain

after hours i have managed to upload this word file with pictures and info on the network please download and view and advise
http://rapidshare.com/files/39777033...MBPS_ISSUE.doc

zain

yes thats what exactly is happening but i will just run the network on 10mbps will that work just for internet as the system is stable all i need to do is wait for the ftp cable i have ordered cat5e outdoor

zain

i have tried different rb750g also a rb433h on 10mbps the radios work fine on 100 they don t tlk

zain

the cables are short they get power on top from a power box

zain

my friends on the same tower are using mikrotik boards but not poe they power up the boards via jack and then run a lan cable and it works at 100mbps i am the only person using poe on that tower as my radio's do not have a jack to power up the radios and run lan on its on so basically what do you su...

zain

their;s radio anntenna fm anntenna alot of fone anntenna's and also alot of rj45 connectors when you mean ground the cat5e you mean leave the grey wire on without removing ? it and what do i ground the radio's are plastic the poe's are plastic i can only ground the anntennas and the power box?

zain

it didn t work it seems theirs EMI interference i dunno how to slove this

zain

Thanks alot guys for your reply i will try to force from both sides do you think that the interference could cause 10mbps because their are alot of cables up their and i think that tower is fuken witch crafted man it has cause me alot of truble one radio use to go on and off the lan which i have jus...

zain

i have a problem with the routerboard rb750g i have it connected to my ubnt sectors all five ports and they show 10mbps but when i take down all the radio's from the tower down to the ground and connect the radio's and the switch it show 100mbps when i take it and put it on the tower it shows 10mbps...

zain

i have a routerboard 433 which is sending data via backhaul to a rb750g now i can acess the 433 routerboard from the rb750g point but if i try to access the rb750g from the 433 end i can not what could be the problem when i try to ping the 433 it says no route for this or something what could i do t...

zain

ok thanks alot i have resloved that issue onther question i have a server connected to the mikrotik it has been released a dhcp of 192.168.1.24 i have made it static and bypassed i am reciving that dhcp via eth3 on the router board 433 now what i want to do is give unlimited bandwith do any user tha...

zain

I have a network setup a mikrotik routerboard 750g connected to 4 ubnt ap's now one of them hasnt been released the dhcp ip so i can t login to the ap the other three i can login to them but one ap i can not login into it i know the dhcp fallback so i wanted to know is it possible to set a static ip...

zain

thanks go it working configured etc went put it on the tower made a mistake it went to mac and 0.0.0.0 deafult now i can t login and way to login via mac ova wifi

zain

i have a rb750g on a tower 80 meters of ground now its connected to 4 ubnt sectors with their radio's all lans are active but i can t login to the router it brings up when i try loging in by mac address port 20561 and when i try with ip 0.0.0. it says could not fetch port 80 etc is their anyway to l...

zain

sorry guys but i repaired it

zain

I just bought a brandnew routerboard 750g when i oned it and plugged a stright rj45 cable the number 1 port light goes on but i can t pick up the mac in winbox why is this i also tried assigning my card with its deafult ip 192.168.88.1 and tried logining via winbox and explore but does the same thin...

zain

from a installtion the rest i didn t understand

zain

when i power up the router rb433 the lan ports do show up working the green light on the side ones after the beep when the blue light only comes on all the lan ports stop working it show's a weakennss of power supply after the beep also i can t reset the board what could be the problem?

zain

will the RouterBOARD 502 Daughterboard work on RB153 or the 433 routerboard

zain

guys i wanted to ask i have a rj45 running from my room to my mikrtoik less then 10 meters now i tested the rj45 with a lan tester one side connected to the lan tester and the other connect too the mikrotik because the mikrotik is on the roof in its box i can t put the other end of the lan tester bu...

zain

let me re-explain i have a server 2003 that with dual lan ports which recives internet and then shares it to the mikrotik board i can login to my hotspot browse on the internet etc i can logon to the server from onther computer i can ftp into the server but i can login to the stadlone vista computer...

zain

dude their only one router which is the mikrotik router board and all pc's connect to it direct so i dunno what ur on about

zain

mikrotik releases 192.168.1.2 /24 subnet 255.255.255.0 default gate way 192.168.1.254

all ip's direct from mikrotik board after log on.

on bother pc's and share and enable of remote can't access the vista computer but can access the windows 2003 server computer

zain

well i can recive dhcp from the mikrotik board on a vista os but when i share file or folder on vista i can not get on to it with onther computer on other router i can t even get on remotely i have enabled remote services enabled remote in firewall and all other enable's need but nuting any one got ...

zain

two more questions is it possible to pump more then one internet connection and share it on one mikrotik board and is it possible to give clients unlimited bandwith on a paticular folder and it's subfolders like ftp folder where users can browse movies and music but at a unlimited speed like a strea...

zain

i fixed my issue i got a server with two lan cards i got one lan card to recive data and the other to share the net now users can login to my mikrotik and then get on the net i toke the mikrotik and pumped it in to a wifi router now the wifi router release its own dhcp like 192.168.2.2 etc etc now m...

zain

my isp giv's me dhcp how do i pump my one dhcp ip into my mikrotik board and the wifi cards should give out dhcp of their own but use the internet from the one ip i am giving the mikrotik baord? i have pumped the net in to ethrenet port 3

zain

normis sorry for the double post made a mistake and surftim i have 2 of these boards one works well ove poe 24volts 0.83a the other board lights up everything it wont boot at the load up i don t have a serial cable to resolve the issue so i will send the board back mikrotik in lativa making life eai...

zain

i am using 24volts ove poe but have no console cable if i get one i will try it

zain

what do you mean by that did you check my post in the hardware section?

zain

will this work?

http://www.roc-noc.com/product.php?productid=58

zain

i have a rs232 console cable but it has male on one side and female on the other http://www.computingsolutions.ca/catalog/images/DB9%20-%20Male%20to%20Female%20Serial%20Cable.jpg i have a male to female converter http://image.lightinthebox.com/images/f/200909/lfnw1251886017031.jpg i tried to plug th...

zain

does urz beep or does thee green light go off?

zain

i have a console cable with male on one side and female on the other side i bought a female converter for the other side but nuthing loads up on the hyperterminal also i have a cisco consle cable with rj45 on one side and female console on the other side what do i do now ? as it doesnt work does thi...

zain

my router board 433 just removed from its box todai and powered up for the first time want boot the boot reset button wont work either what do i do ? onther question if the router board does not beep or the green light doesnt go off wuld the hyper terminal work?

zain

any trouble shoots on how to repair it then send it back

zain

i live in africa bought the board from uae no way to get it working its basically not booting it just stop when powered up

zain

i have the same issue my board on's everything but doesnt boot what do i do ?i tried the reset buttong it does not load the back up boot loader what do i do now?

zain

i tried onther board and it beeps a brand new one i had 2 what do i do of the one that doesnt beep?

zain

its brand new man juz removed it from its cover do you think i should reset it?

zain

no beep no blinks thats what i was thinking too ? its the first time am oning it ova a 24volts 0.83 a poe with stright cable about 1 meter cable? the lights are just on green and blue their just staying on

zain

nothing i have disabled antivirus firewall also the 433 is powered up through a stright cable over ethernet from poe i got a stright cable coming to my laptop? how do i make a cross over but do you think cause of a crossover it would not work do you want me to power up the board with crossover cable...

zain

thats my issue it want show up in the winbox the mac

zain

i want to configure i can t cause i can 't login its the first time i have powered the mikrotik 433? do you get me now? or am i being difficult to explain my issue?

zain

what you want me to post screen shots of the winbox when i try to look for the mac to login or what? this is the first time i am powering up this mikrotik board?

zain

Thank you for your reply I have worked with the router board 500r5 and 500 series they but the 433 is my first time I have just got a brand new board the 433 I put the three wifi cards on but now I want to login and configure the router I am using a 24volt Poe 0.83A when I assign the lan card static...

zain

Is this sector compatible with the routerboard 433
Weblink
http://www.l-com.com/item.aspx?id=22076

And how could i test the lmr 400 coaxil cable if its good or bad

zain

Whats the use of the SD Card slot? on the router 433? and could i use 12volts to power it up 0.5 Amps

zain

do u think that the sectors are not reciving enough transmission power

zain

all cables are tested and are fine the sma and the coaxil

zain

http://www.l-com.com/item.aspx?id=22076 I have 2 of these sectors http://www.dlink.com/products/?pid=415 I have a d-link dual router I can remove the aerials and use a SMA cable in to the sectors I have no idea if it has enough power to power up the sectors I have one these boards http://www.routerb...

zain

the radio is on the tower the coax cable is lmr 400 with pigtales on top on the tower i have power on the tower i either use the mikrotik board or i use the nanostaions as radios using a half meter sma cable

zain

i brought the sectors down todai from the tower the 6th time going up and down 24 meter the female connectors are fine when u shack it no noise showing its not broken i put my two sectors in line and a omini 3 anntenna's in line went 20 meters away and all were giving -39dbm which show's they seem o...

zain

how to test if a sector anntenna is working or blown up using a digital multimeter? any one know or any other equipment found locally unlike a spectrum analyzer

zain

can you make a video on that or is their a tut on how to do it

zain

how do you use them lol do you power up your anntenna and it tells you if your anntenna is broadcasting on high gain or low gain ? is their a tool to test if a sector is working or not?

zain

i think the pigtale is my issue cause all of them broke and i soldred them back on my cards are fine i will change the board aswell to test onther question i left them on the tower my sectors and it was raining heavy and lighting fell as well could it have blown up cause of the lighting the towers h...

zain

has no physical damage only been left in the rain but wasnt on it was up on my tower in the rain but there was no broadcasting when i broadcast using the nano's or the mikrotik board i get very low singal like -70dbm but the first time when i tried it on the mikrotik board i got -59dbm on one secotr...

zain

I have to sector anntenna's specification below: Electrical Specifications Frequency 2400-2500 MHz Gain 20 dBi Horizontal Beam Width 120° degrees Vertical Beam Width 5° degrees Impedance 50 Ohm Max. Input Power 250 Watts VSWR < 1.3:1 avg. Connector N Female Lightning Protection DC Short http://www.l...

zain

thanks i will figure something out seems like no1 can get my prblem solved lol i will just use the mikrotik board as a os and use differnet radio's myt work

zain

if i didn t use the mikrotik board as my radio to broadcast my singal and instead used the ethernet ports to pump the data from the mikrotik board in to nanostaions as radios for external anntena's would it slow down the net process? and how do i test these items 2 sector anntenna's if they are work...

zain

i am bulding my own isp it was just to make a trial of the mikrotik board well i got more issues then just the net i bought two brand new sector anntennas now almost 2 weeks ago when i was trying the mikrotik when it was working fine before it blow up cause of high voltage from the power suppliers i...

zain

yes your right but i power up my mikrotik through the power port 12volts i use the poe port to pump the net inn its a office use internet connection that i am getting from my isp my public ip is :41.190.95.233 and the dhcp i get from my isp is 192.168.1.153 255.255.255.0 192.168.191.1 i have made a ...

zain

the cable is where the internet is coming from a anntenna i want to feed the internet direct into my mikrotik board on eth1 port 1 which is poe port and then i want my wlan 1 card and 2 to broadcast my hotspot when i logon to my hotspot i shuld go to my isp hotspot once i login to my isp hotspot eve...

zain

basically i want to make a temporary connection to test my netowrk my isp also uses mikrotik what i want to do is pump my isp's internet in to my mikrotik so basically i should login to my hotspot page and then i should login in to my isp hotspot page after that any1 one who logs on to the network s...

zain

i ment in winbox how do i configure eth port1 to recive dhcp and eth2 and 3 should relase the dhcp recived by eth1 so basically 1 will be the internet and 2-3 will b my ap's

zain

i have set everything on my mikrotik board dhcp etc but how do i pump in my internet to the mikrotik board my internet releases dhcp aswell what can i do so that i can pump the internet in to the board ?

zain

2 mikrotik 500r5 shuld let u have 200 uses working smoothly

zain

am in malawi lilongwe opening a wisp nearly done just these boards messing with my head when ever i go put them up they end up having a blown up adapter then i have to go up and change it also one show's good singal the other show very bad singal wonder why better of using nanostations they neva go ...

zain

true i will see what i can do with that cable it suppose to have nine cables inside if i am right onther bad news while shorting the board i blow it up it doesnt on anymore i only have one board working at the momment i will get a tech to fix it for me thanks for all the advices and will try making ...

zain

ok guys great news i got one board to reset by shorting it but i have one board that want short even by the touch of a coin well it will go off and back on but it will just end up bringing the old settings. i got hold of a cable which has female on one end and the other male but i had the female con...

zain

i did download netinstall application but it needs the null modem cable well i got hold of a rs232 connector http://www.1freeaday.com/pda1/images/10004746/10004746_4_image.jpg i inserted it on the mikrotik board and into the back of my desktop computer the console port tried calling it up with hyper...

zain

tried all nuting guess only the cable can help now

zain

sorry whats netinstall and i did their aint onther way but the null modem cable

zain

would female to femal connector do to reset the boards called d connector

zain

when booting i hold the metal peace on the reset point for 10 mins still no reset?

zain

i have tried that it does not reset ?

zain

Hello Its my first post and i hope it might be usefull. Use that program NeighborViever -> mark on needed device -> click on MAC Telnet -> Log On and wait a while, press Enter and type system reset, apply and DONE. Your mikrotik has default settings and rebooting. how do i log on if i don t knw the...

zain

i live in africa lol it very hard to get sstuff here i only have to mikrotik boards if one goes dwn network goes down lol

zain

wuld a vga cable do it ? cause i have a serial cable which has the serial port and at the end a rj45 cable where can i get this null modem cable

zain

yh i think thts why but one of my main boards has locked down i backed it bck to a back up which i don t know the password i can t even reset it i dunno what to do any suggestions.?

zain

How do i reset my mikrotik board without shorting the mikrotik 500r5 seriese board

can i use the serial console to reset it how does the serial cable look does any1 have a picture of the serial cable?

zain

i have got my systems all set up but now having singal issues my wireless card 1 show 59 % from near by scan of the singal but my wifi card 2 shows 70% pictale is fine coaxil is fine and the sector anntenna is brandnew and fine aswell what could be the issue?

zain

can i find ready made hotspot pages then just make chnges to them like the wairlink hotspot page?

zain

i have a router 500r5 and to wan card on it i used one wan card to lock on to a network and the other wan card to broadcast the singal i am reciving from the first card now it doesn t let me login to the board any more it says my user name or password is wrong i tried hard reseting it the hole doesn...

zain

i have 3 mikrotik boards which all have two wan slots and 3 lan ports and i have one station mikrotik board which can only recive the one with a one wan slot.

i want all these to connect to eeach other how do i get tht done?

zain

two questions firstly i have a mikrotik board connected to two sector anntennas i could login everything now i tried searching for networks on my wlan 1 card and connected to a network now ssid 1 does not show but ssid 2 shows i can connect to ssid 2 but can not login into the mikrotik board basical...

Search found 143 matches